Casio EX F1 User Manual

							
111Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
Brightness
You can select one of five brightness levels , from +2 (brightest) to –2 (least bright).
NOTE
• Altering the brightness of an image causes the original image and the altered 
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and  time indicates when the image was originally recorded, not when the image was 
altered.
• The corrected version of an image cannot be output to a TV (page 102).
Procedure
[ p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing
See page 119 for details.
Adjusting the Brightness of an Existing Snapshot 
(Brightness)
Selecting Images for Printing (DPOF Printing)
B 
						

							
112Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Protect
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 145).
• Performing the above procedure while a CS gr oup folder is displayed will protect all 
the images in the CS group folder. You  can protect individual images in a CS group 
by performing the above procedur e while the image is displayed.
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [
4] and [ 6] to scroll through the 
files until the one you want to protect 
is displayed.
2Use [ 8] and [ 2] to select “On” and 
then press [SET]. 
An image that is protected is indicated 
by the  › icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, 
select “Off” instead of “On” in step 2 above. 
All Files: 
On Protects all files.1Use [
8] and [ 2] to select “All Files: On” and then press [SET].
2Press [MENU].
To unprotect all files, select “All Files:  Off” instead of “All Files: On” in 
step 1 above. 
						

							
113Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Rotation
1.Use [ 8] and [ 2] to select “Rotation”  and then press [SET].
Each press of [SET] will rotate  the displayed image 90 degrees left.
2.When the displayed image is at  the orientation you want, press 
[MENU].
NOTE
• Rotation of movie images is not supported.
• Note that this procedure does not actual ly change the image data. It simply alters 
how the image is displayed on  the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of t he image will be displayed on the 12-image 
screen.
Procedure
[ p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. Y ou can resize an image to one of three image 
sizes: 3M, 2M, VGA.
• Resizing a 16:9 or 3:2 size snapshot wi ll create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize) 
						

							
114Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Trimming
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size 
you want, use [ 8], [ 2], [ 4], and [ 6] to display the 
portion of the image you want to cut out, and then press 
[SET]. • The image produced by cropping a 3:2 or 16:9 image  will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the  same as the recording date of the original snapshot.
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots or movies  you recorded with this camera.
Cropping a Snapshot (Trimming)
Copying Files (Copy)
Built-in * Card Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It 
cannot be used to copy a single file.
Card 
* Built-in Copies a single file on the memo
ry card to camera built-in 
camera memory. Files are copied to the folder in built-in 
memory whose name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image  (page 100).
1Use [ 4] and [ 6] to select the file you want to copy.
2Use [ 8] and [ 2] to select “Copy” and then press [SET].
Represents
snapshot area
Part of snapshot that is currently displayed
Zoom factor 
						

							
115Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Divide Group
See page 99 for details.
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Display Layout
Use this procedure to select how display images are shown on the monitor screen.
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Select Frame
See page 100 for details.
Dividing Up a Continuous Shutter Group (Divide Group)
Selecting the PLAY Mode Screen Layout (Display Layout)
PLAY Mode
Normal 100% of the display image is always 
visible. With some aspect ratios, black 
bands may appear above and below, or 
to the left and right of the image.
Wide
With this setting, the display image is the 
maximum possible size that allows the 
entire image to be displayed horizontally. 
With some aspect ratios, the top and 
bottom of the image will be cut off.
Copying a Continuous Shutter Group (Select Frame) 
						

							
116Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 119).
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you 
want to print to a professional print service and have them 
printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print 
images directly from a memory ca rd. For details, see the user 
documentation that comes with your printer.
Connecting Directly to a  PictBridge Compatible 
Printer
You can print on a printer that supports PictBridge (page 
117).
Printing with a Computer
After transferring the images to your computer, use 
commercially available software to print. 
						

							
117Printing
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
. To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [ 6].
3.Use [ 8] and [ 2] to select “PTP (PictBridg e)”, and then press [SET].
.Connecting the Came ra to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The camera does not draw power over the USB cable. Make sure the camera’s  battery is sufficiently  charged before connecting.
• Make sure that you insert the cable connecto r into the USB/AV port until you feel it 
click securely into place. Failure to inse rt the connector fully can result in poor 
communication or malfunction.
• Note that even while the connector  is fully inserted, you still will 
be able to see the metal part of the connector as shown in the 
illustration.
• When connecting the USB cable to a USB port, make sure you  align the connector correctly with the port.
• Make sure that the camera is turned off  before plugging in or unplugging the cable. 
Check the user documentation that comes with the printer for information about 
requirements before plugging into or unplugging from the printer.
Connecting Directly to a PictBridge Compatible Printer
USB
USB cable
USB port USB/AV port
Making sure that the  6 mark on the 
camera is aligned with the  4 mark of the 
USB cable connector, connect the cable to 
the camera.
Large 
connector
Small connector 
						

							
118Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [ 8] and [ 2] to select “Paper Size”, and then press [ 6].
4.Use [ 8] and [ 2] to select a paper si ze and then press [SET].
• The following are the  available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints usi ng a paper size selected on the printer.
• See the documentation that comes with your printer for information about  paper settings.
5.Use [ 8] and [ 2] to specify the print option you want.
• To toggle date stamping on and off, press [DISP]. The date stamp will be 
printed when “On” is indicated on the monitor screen.
6.Use [ 8] and [ 2] to select “Print”  and then press [SET].
Printing will start and the message “Bu sy... Please wait...” will appear on the 
monitor screen. The message will disappear after a short while, even though 
printing is still being performed. Pr essing any camera button will cause the 
printing status to re-appear. The print menu screen will re-appear when printing is 
complete. • If you selected “1 Image”, you can repeat the procedure from step 5, if you 
want.
7.After printing is complete, turn off the camera and disconnect the USB 
cable from the printer and camera.
1 Image : Prints one image. Select and then press [SET]. Next, use [ 4] 
and [ 6] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this  option, images will be printed in accordance with DPOF settings 
(page 119). 
						

							
119Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings,  you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service. • Whether or not you will be able to use  DPOF settings for printing depends on the 
printer you are using.
• Some professional print serv ices may not support DPOF.
.Configuring DPOF Settings Individually for Each Image
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * Select images
1.Use [ 4] and [ 6] to scroll through the files until the image you want to 
print is displayed.
2.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [DISP] so “On” is shown for  date stamping.
• Repeat steps 1 and 2 to configure setti ngs for other images, if you want.
3.Press [SET].
.Configuring the Same DPOF  Settings for All the Images
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * All images
1.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [DISP] so “On” is shown for  date stamping.
2.Press [SET].
Using DPOF to Specify Images to be Printed and the Number 
of Copies
B 
						

							
120Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute  will be performed using the last DPOF 
settings you configured for the images. To cl ear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service ab out your DPOF settings!
If you take a memory card to a professional pr int service, be sure to tell them that it 
includes DPOF settings for the images to  be printed and the number of copies. If you 
don’t, the print service may print all the images without regard to your DPOF settings, 
or they may ignore your date stamp setting.
. Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
Configuring 
camera settings Configure DPOF settings (page 119).
You can turn date stamping on and off each time you print. 
You can configure settings so some images include the date 
stamp and some don’t.
Configure the Camera’s Timestamp setting (page 140).
• The camera’s Timestamp setting imprints the date into a  snapshot when you shoot it, so the date is always included 
when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that  includes a date stamped with the camera’s Timestamp 
function. Doing so can cause the two stamps to be 
overprinted.
Configuring 
computer 
settings You can use commercially 
available image management 
software to date stamp images.
Professional 
print service Request date stamping when ordering prints from a 
professional print service.