Casio EX F1 User Manual

101Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [ 6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom co ntroller towards z ([ ) to 
zoom.
You can use [ 8], [ 2], [ 4], and [ 6] to scroll the 
zoomed image on the monitor screen. Slide the 
zoom controller towards  w to unzoom the image.
– If display indicators are turned on, an indicator 
in the lower right corner of the monitor screen 
shows what part of the zoomed image is 
currently displayed.
– To...

102Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure  to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still  will be able to see the metal part of the connector as shown 
in the illustration.
• Before connecting to a TV to display images, be...

103Viewing Snapshots and Movies
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device 
using the camera’s bundled AV cable.– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
– Camera: USB/AV port
You can play a slideshow of snapshots and mo vies on the camera and record it on a 
DVD or video tape. You can record movies by selecting “ » Only” for the slideshow 
“Images” setting (page 106). When...

104Viewing Snapshots and Movies
Use a commercially available HDMI cable to 
connect the camera to the TV. For 
information about playback, see page 102.• Use a commercially available HDMI cable  that is marked with the logo shown to the 
right.
NOTE
• Use a HDMI cable that with a plug that is  compatible with the camera’s HDMI mini 
connector on one end, and a plug that is compatible with your TV’s HDMI 
connector on the other end.
• Proper image and/or audio output and other operations may not be...

105Viewing Snapshots and Movies
.Selecting the HDMI Terminal Ou tput Method (HDMI Output)
Procedure
[MENU] * Set Up Tab  * HDMI Output
Use this setting to select the digital signal  format when connecting to a TV with an 
HDMI cable.
*1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output 
method may be 576p when outputting to a digital TV in a PAL reception area that does 
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed 
automatically,...

106Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[ p ] (PLAY)  * [MENU]  * PLAY Tab  * Slideshow
For information about menu operations, see page 77.
Playing a Slideshow on the Camera (Slideshow)
Start Starts the slideshow
ImagesSpecifies the type of images to be included in the slideshow
All images: Snapshots, movies
, continuous shutter images
All images except Z:...

107Other Playback Functions (PLAY)
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the slideshow and returns to the menu screen.
• Adjust audio volume by pressing [ 8] or [ 2] during playback.
• All button operations are disabled while  the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
Procedure
[p ] (PLAY)  * Movie Screen  * [MENU]  *...

108Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Movie Screen of Movie to be Edited  * [MENU]  * 
PLAY Tab  * Movie Editing
The Movie Editing feature lets you use one  of the following procedures to edit out a 
specific part of a movie.
1.Use [ 8] and [ 2] to select the editing method you want to use and then 
press [SET].
2.Use the following operations to select the 
frame (point) from which or to which you 
want to cut the movi e (the cut point).
Editing a Movie on the  Camera (Movie...

109Other Playback Functions (PLAY)
3.When the frame where you want the cut point to be is displayed, press 
[ 2 ].
4.Use [ 8] and [ 2] to select “Yes” an d then press [SET].
The selected cut operation will take cons iderable time to complete. Don’t try to 
perform any camera operation until  the “Busy... Please wait...” message 
disappears from the monitor screen. Note  that a cut operation can take a long 
time if the movie being edited is long.
NOTE
• When you edit a movie, only the result is saved....

110Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
White Balance
You can use the white balance setting to select a light source type for a recorded 
image, which will affect the colors of the image.
NOTE
• You also can adjust the white balance when recording images (page 34).
• Altering the white balance of an image  causes the original image and the altered 
version to be stored as separate files.
• When you display an altered image on the camera’s...