Casio Cassiopeia E 100 Palm-Size Pc Users Guide

							Part 2 Communicating with a Computer63
5. Tap the Configure button to display the Device Properties dialog. Make the
settings described below.
Port SettingsSet the baud rate in accordance
with the modem you are using
and the speed of the remote
device you are dialing up.
Call OptionsDepending on the type of line
you are connected to, you may
need to uncheck this option.
The default setting here is 120 seconds. 
Depending on the modem card you are 
using, you may have need to change this 
setting. See the ReadMe file on the 
Windows CE CD-ROM that comes with 
your Palm-size PC for more information.
6. After making the Device Properties settings you want, tap OK to close the dialog
and return to the New Dial-Up Connection dialog. 
						

							Palm-size PC UserÕs Guide64
7. Tap the TCP/IP Settings button to display the TCP/IP Settings dialog. Make the
settings shown below.
General
Name Servers
8. After making the  TCP/IP Settings  you want, tap OK to close the dialog and return
to the New Dial-Up Connection dialog. Then tap Next. 
						

							Part 2 Communicating with a Computer65
9. Enter the telephone number of the server.
10. After everything is the way you want it, tap Finish to return to the initial
Connection window.
The Connection window now
contains the new connection
you just created.
Note
You have to use the above procedure to create a connection for each remote server
(service provider, corporate network, or desktop computer) you plan to dial up. 
						

							Palm-size PC UserÕs Guide66
Setting the Dialing Properties
Dialing properties control how the phone number you input in step 9 of the above
procedure is actually dialed. To open the Dialing Properties dialog, tap Start,
Settings, and then Dialing.
A nine is dialed before
the phone number if you
select Work here.
You can set up properties for each dialing location from which you dial. Then before
you need to dial a number, simply select the dialing location you want, and dialing is
performed with all the necessary prefixes.
LetÕs say you have the following number specified for your dial-up connection.
Area Code: 567 Phone Number: 123-4567
You can set up dialing properties to add the area code whenever you dial from home,
and drop the area code but append a nine at the beginning to get an outside line
whenever you dial from the office.
Dialing from home: 567-123-4567
Dialing from the office: 9-123-4567
You can add new dialing locations to the list as required, and even specify different
dialing patterns for each location. See Palm-size PC online help for more information
about dialing properties. 
						

							Part 2 Communicating with a Computer67
Setting Up the Remote Computer
A remote computer must also be set up correctly before you can access it from your
Palm-size PC. The following describes the required settings for each type of remote
computer.
Internet Service Provider or Corporate Network
The server must be running for a connection to be made. Systems are sometimes down
due to periodic maintenance or unforeseen problems. Your service provider or network
administrator should be able to keep you informed of regularly scheduled system
maintenance. If the telephone number is busy when you dial, wait awhile and try again.
Remote Desktop Computer
You can connect to a remote desktop computer through a modem attached to it, or
through the network to which the computer is connected. The following points apply in
either case.
¥ Before establishing a dial-up connection, you must first establish partnership
between your Palm-size PC and the desktop computer.
¥ The desktop computer must be turned on, with Schedule+, Exchange, or Outlook
running with your user profile.
¥ In the lower right corner of the Mobile Devices window, the connection status must
show Waiting for mobile device to connect.
¥Enable Synchronization must be checked on the ActiveSync Options dialog.
¥ When connecting through a modem, the modem must be connected to the desktop
computer and turned on. You must also enable mobile device connection as
described below.
¥ From the Mobile Devices window, tap File and then Communications to display
the Windows CE Services Properties dialog shown below.
Check this box
to enable mobile
device connection.
Confirm that the
serial port is ready
to communicate. Click here to enable
auto connect. 
						

							Palm-size PC UserÕs Guide68
¥ For a remote connection to a desktop computer connected to a network, make the
Windows CE Services Properties shown below.
Check this box to
enable mobile
device connection.
Confirm that the
network connection
is ready.
Establishing a Dial-Up Connection
After making all the required settings, you are ready to try establishing a dial-up
connection with your Palm-size PC.
Note
¥ A CompactFlash modem card makes it possible for you connect to a standard analog
telephone line. See the separate Hardware Manual for more information about using
it.
¥ We recommend that you use the AC adapter to power your Palm-size PC whenever
using a CompactFlash modem card for communication. 
						

							Part 2 Communicating with a Computer69
To establish a dial-up connection with a service provider or corporate
network
1. Tap Start, Programs, and then Communications.
This list shows all connections
you created with the procedure
under “To make Palm-size PC
dial-up connection settings” on
page 61.
2. Tap the connection to display the following dialog.
Enter the user name and password.
Check the Save Password option if
you don’t want to input your password
every time.
3. Check to make sure that the phone number is correct.
¥ If the phone number is not correct, refer to the procedure under ÒTo make Palm-size
PC dial-up connection settingsÓ to correct it. 
						

							Palm-size PC UserÕs Guide70
4. Tap Connect to connect.
¥ The dialog shown below appears telling you the connection is being established. The
dialog closes automatically when the connection is established.
¥ Now you can send and receive e-mail.
Note
You can also establish a dial-up connection directly from Inbox. See ÒHow Mail is
Sent and Received by InboxÓ on page 52 for more information.
To establish a dial-up connection with a desktop computer for
synchronization
1. Tap Start, Programs, Communications, and then ActiveSync.
This list shows all connections you
created with the procedure under
“To make Palm-size PC dial-up
connection settings” on page 61.
This box specifies the name of
the computer you can connect with. 
						

							Part 2 Communicating with a Computer71
2. Tap the connection to display the following dialog.
Enter the user name and password.
Check the Save Password option if
you don’t want to input your password
every time.
3. Check to make sure that the phone number is correct.
¥ If the phone number is not correct, refer to the procedure under ÒTo make Palm-size
PC dial-up connection settingsÓ to correct it.
4. Tap Connect to connect.
¥ A dialog appears telling you the connection is being established. The dialog closes
and synchronization starts automatically when the connection is established.
¥ The 
 icon on the Taskbar indicates that a connection currently exists.
Closing a Connection
Double-tap the  icon on the Taskbar. On the dialog that appears, tap Disconnect to
close the connection.
ActiveSync and Inbox can be set up to close a connection established from them
automatically once they finish their operations. 
						

							Palm-size PC UserÕs Guide72
Chapter 6
Windows CE Services and Channels
Installing Windows CE Services on your desktop computer enables the following
operation.
1. Synchronization of Pocket Outlook data (Calendar, Contacts, Tasks, Inbox) on your
Palm-size PC with Microsoft Schedule+ for Windows and Microsoft Outlook 98 for
Windows data on your desktop computer.
2. Downloading to your Palm-size PC of information from channels subscribed to on
your desktop computer with Microsoft Internet Explorer 4.0.
3. Installation of Palm-size PC programs.
4. Exchange of files between your Palm-size PC and desktop computer. Palm-size PC
file and folder operations from your desktop computer.
5. Back up and recovery of Palm-size PC data using your desktop computerÕs hard
disk.
Items 1 through 3 are explained in this chapter, while items 4 and 5 are explained in
Chapter 7.
Windows CE Services
The following describes how to install and use Windows CE Services.
Installing Windows CE Services
This section explains how to install Windows CE Services on your desktop computer,
and how to establish partnership with your Palm-size PC.
Before Beginning Installation
Note the following points before beginning installation.
¥ Installation requires you to restart your computer. Save any files that are currently
open and quit all programs before you begin installation.
¥ After installation is complete, your computer will look for the COM port where your
Palm-size PC is connected and automatically make communications settings. See the
separate Hardware Manual for more information on how to connect your Palm-size
PC to your desktop computer with a cable.
¥ Even if you plan to use an infrared connection for communication, you still need to
connect to your computer using a cable during the setup procedure. See Windows
CE Services online help for more information on synchronizing over an infrared
connection.