Canyon Router CNP-WF514N1 User Manual

							11 
2-2-2 Windows 2000 IP address setup: 
 
1. Click ‘Start’ button (it should be located at lower-left corner of your computer), 
then click control panel. Double-click Network and Dial-up Connections icon; 
click Local Area Connection, and Local Area Connection Properties 
window will appear. Select ‘Internet Protocol (TCP/IP)’ and then click ‘Properties’   
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address 
automatically’, then click ‘OK’. 
 
    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							12 
2-2-3 Windows XP IP address setup: 
 
1. Click ‘Start’ button (it should be located at lower-left corner of your computer), 
then click control panel. Double-click Network and Internet Connections icon, 
click Network Connections, then double-click Local Area Connection, Local 
Area Connection Status window will appear, and then click ‘Properties’. 
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address 
automatically’, then click ‘OK’. 
 
    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							13 
2-2-4 Windows Vista IP address setup: 
 
1. Click ‘Start’ button (it should be located at lower-left corner of your computer), 
then click control panel. Click View Network Status and Tasks, and then click 
Manage Network Connections. Right-click Local Area Network, then 
select ‘Properties’. Local Area Connection Properties window will appear, 
select ‘Internet Protocol Version 4 (TCP / IPv4), and then click ‘Properties’. 
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address 
automatically’, then click ‘OK’. 
 
    
  
						

							14 
2-2-5 Router IP address lookup   
 
After the IP address setup is complete, please click ‘start’ -> ‘run’ at the 
bottom-lower corner of your desktop: 
 
 
 
Input ‘cmd’, then click ‘OK’ 
 
  
						

							15 
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed by 
‘Default Gateway’ (In this example, the IP address of router is 192.168.2.1, please 
note that this value may be different.) 
 
 
 
 
 
 
 
3. Connect the router’s management interface by web browser 
 
After your computer obtained an IP address from router, please start your web 
browser, and input the IP address of router in address bar. The following message 
should be shown: 
 
NOTE: If the IP address of Gateway is not displayed, or the address followed 
by ‘IP Address’ begins with ‘169’, please recheck network connection 
between your computer and router, and / or go to the beginning of this 
chapter, to recheck every step of network setup procedure.  
						

							16 
Please input user name and password in the field respectively, default user name is 
‘admin’, and default password is ‘1234’, then press ‘OK’ button, and you can see the 
web management interface of this router: 
 
 
 
 
 
 
 
 
 
 
 
 
NOTE: If you can’t see the web management interface, and you’re 
being prompted to input user name and password again, it means you 
didn’t input username and password correctly. Please retype user 
name and password again. If you’re certain about the user name and 
password you type are correct, please go to ‘4-2 Troubleshooting’ to 
perform a factory reset, to set the password back to default value. 
TIP: This page shows the four major setting categories: QuickSetup, 
General Setup, Status, and Tools. You can find the shortcut which 
leads to these setting categories at the upper-right corner of every 
page, and you can jump to another category directly by clicking the 
link, and don’t have to go back to the first page.  
						

							17 
2-3 Using ‘Quick Setup’ 
 
This router provides a ‘Quick Setup’ procedure, which will help you to complete all 
required settings you need to access the Internet in very short time. Please follow 
the following instructions to complete the ‘Quick Setup’: 
 
Please go to QuickSetup menu by clicking ‘QuickSetup’ button. 
 
 
 
And the following message will be displayed: 
 
 
 
 
 
 
 
HERE!  
						

							18 
1. Set Time Zone 
 
 
 
Here are descriptions of every setup items: 
 
Set Time        Please press 
  button, a drop-down list will be shown, 
Zone (1):    and you can choose a time zone of the location you live. 
 
Time Server        Input the IP address / host name of time server here 
Address (2):       
 
Daylight         If the country you live uses daylight saving, please check 
Savings(3):    ‘Enable Function’ box, and choose the duration of daylight 
saving. 
 
After you finish with all settings, please click ‘Apply’ (4) button.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
2
3
4 
NOTE: There are several time servers available on internet: 
 
129.6.15.28 (time-a.nist.gov) 
132.163.4.101 (time-a.timefreq.bldrdoc.gov) 
131.107.1.10 (time-nw.nist.gov) 
 
If you found that the time of router is incorrect, try another time server.  
						

							19 
2. Broadband Type 
 
 
Please choose the broadband (Internet connection) type you’re using in this page. 
There are six types of Internet connection, they are: 
Cable Modem      - Please go to section 2-3-1 
Fixed-IP xDSL     - Please go to section 2-3-2 
PPPoE xDSL      - Please go to section 2-3-3 
PPTP xDSL      - Please go to section 2-3-4 
L2TP xDSL      - Please go to section 2-3-5 
Telstra Big Pond    - Please go to section 2-3-6 
If you’re not sure, please contact your Internet service provider. A wrong Internet 
connection type will cause connection problem, and you will not be able to connect 
to internet. 
If you want to go back to previous step, please press ‘Back’ button on the bottom of 
this page. 
 
 
 
 
 
 
 
 
NOTE: Some service providers use ‘DHCP’ (Dynamic Host 
Configuration Protocol) to assign IP address to you. In this case, you 
can choose ‘Cable Modem’ as Internet connection type, even you’re 
using another connection type, like xDSL. Also, some cable modem 
uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem 
connection, even you’re using a cable modem.  
						

							20 
2-3-1 Setup procedure for ‘Cable Modem’: 
 
 
 
Here are descriptions of every setup items: 
 
Host Name (1):      Please input the host name of your computer, this is   
        optional, and only required if your service provider 
            asks you to do so.   
 
MAC address (2):    Please input MAC address of your computer here, if your 
service provider only permits computer with certain MAC 
address to access internet. If you’re using the computer 
which used to connect to Internet via cable modem, you 
can simply press ‘Clone Mac address’ button to fill the MAC 
address field with the MAC address of your computer. 
 
After you finish with all settings, please click ‘OK’ (3) button; if you want to go back 
to previous menu, click ‘Back’.   
 
 
 
 
 
 
 
 
 
 
 
 
 
1 
2 
3