Canon Selphy Es1 User Guide

19
About LCD Monitor and Main Display Details
„Adjusting the Angle of the LCD Monitor and Switching the Display
„Main Display Details
LCD Monitor
The angle of the LCD 
monitor can be manually 
adjusted to any angle.
DISP. (Display) Button
Each press of this button 
switches the monitor display.
 
 Operation commands
 Information
 No information
(During print confirmation) (During image playback)
Paper status (guideline)
*The trial cartridge is different from the standard oneand is not shown in this...

20
Printing Procedure and Reference Guides
User Guide (This Guide) p. 51
Before you connect the printer to a 
computer, you must install the printer 
driver from the Compact Photo Printer 
Solution Disk. Be sure to install the 
software before connecting the printer 
to the computer using the procedure 
on page 52.
User Guide (This Guide) p. 22
Wireless printingPrinting from a 
memory card
Connect the printer to 
the camera for printing
Preparing
Installing the Software and the Printer Driver
When an...

21
When using non-Canon digital cameras, refer to the 
user guide that came with your camera.
User Guide (This Guide) p. 58
User Guide (This Guide) 
p. 39
User Guide (This Guide) 
p. 28
Printer Software Guide (CD-
ROM included with your printer)
Camera User Guide
Direct Print User Guide
Printer Software Guide (CD-ROM 
included with your printer
)
User Guide (This Guide) p. 42User Guide (This Guide) 
p. 42
User Guide (This Guide) p. 39
Camera User Guide
Direct Print User Guide
User Guide (This Guide) p....

22
Let’s Prepare
„Preparing a Cartridge
An ink and paper integrated cartridge is used in this printer. Prepare a cartridge with the 
size of the paper you will print.
The cartridge differs according to the paper size and ink type.
*The design of the label on the cartridge may slightly differ from the illustration above.
Separately Sold Products   Separately Sold Products (p. 16)
When opening a cartridge package, check the contents. If something seems to be 
damaged, contact the dealer for assistance....

23
„Loading the Cartridge
Proper Handling of Cartridges Cartridge (p. 14)
1
Check that the ink sheet is tight 
and that the paper is correctly 
loaded in the cartridge.  
zWhen inserting the cartridge into the printer, if the 
ink sheet is so slack it catches, insert the cleaner 
unit and turn it slowly to take up the slack.
zIf the paper is outside of the clips, push it 
down with your finger so it is inside the clips.
•It will not be possible to use all the paper 
for printing if you overwind the ink...

24
zDo not reuse empty cartridges. Attempting to reuse an empty cartridge may result in 
malfunction or damage to the printer.
zDo not remove the cartridge while feeding, printing, or ejection is in progress.
„Placing the Printer
Usage Location  Usage Location (p. 13)
Refer to the figure below when placing the printer. Numbers in the figure correspond to 
the steps in the procedure below.
The battery pack (sold separately) also can be used (p. 62).
1
Place the printer on a flat area.
2
Connect the...

25
„Setting the Display Language (when the printer is used for 
the first time)
Set the display language for menus and messages that appear on the LCD monitor.
You can also set the display language using the following procedure.
1
Press the printer’s power button until it lights green.
zThe startup screen is displayed on the LCD monitor, followed shortly by the standby 
screen.
2
Press and hold down the SET button, and then press the MENU 
button.
Make sure that a memory card is not inserted into the...

26
Printing from Memory Cards
Insert the memory card into the printer to print images saved on the memory card.
zDo not insert empty card adapters into the printer. The printer will not function 
properly. Always insert a card into the adapter before inserting the adapter into the 
printer. If an empty adapter has been inserted, remove the adapter, turn the power 
off, and then turn it on again.
zMake sure that a camera, computer or wireless adapter is not connected to the printer.
Compatible Memory...

27
Inserting/Removing Memory Cards
Do not load two or more memory cards at the same time.
„Removing Memory Cards
Do not remove memory cards or turn the printer off while the indicator lamp is blinking.
1
Press the printer’s power button until it lights green.
zThe startup screen is displayed on the LCD monitor, followed shortly by the standby 
screen.
2
Push the memory card all the way into the appropriate card slot.
zThe indicator lamp blinks green, and the images are displayed on the LCD monitor. If...

28
Single Photo Print
Display the image to be printed on LCD Monitor and print the image. 
You can specify the number of prints of the displayed image to print. Images can also be 
trimmed.
Buttons available for the following functions
1
Turn the printer on, and insert the memory card into the 
appropriate memory card slot (p. 27).
2
Press the   or   button to display the image 
to print.
zPressing the DISP. (display) button cycles through the LCD 
monitor display modes (p. 19).
zIf you press the...