Canon Selphy Es1 User Guide

59
When disconnecting the USB cable, you do not need to turn off the printer or your computer.
1
Connect one end of a commercially available USB cable to the USB 
port on the printer, and the other end to a USB port on your 
computer.
zThere is no need to turn off the printer or your computer.
zWhen connecting the printer to your computer, make sure the connectors on the ends of 
the USB cable match the ports on the printer and your computer.
zFor the location and direction of your computer’s USB port,...

60
Software Manuals
Adobe Reader or Adobe Acrobat Reader must be installed to view the PDF Manuals. If this 
software is not already installed in your computer, access the following web site and 
download the software.
http://www.adobe.com/products/acrobat/readstep2.html
„Printer Software Guide
This guide describes how to print using the software installed on your computer.
The following manuals can be downloaded from the following web site if they are required:...

61
Uninstalling the Software
Windows
Click the [start] button and select [All Programs] [Canon Utilities] [ZoomBrowser EX] [ZoomBrowser EX Uninstall].
zYou can use the same procedure to uninstall other software.
Macintosh
Drag the application’s folder (the folder in which it was installed) into the Trash, and 
empty the Trash.
Uninstalling the Printer Driver
Windows
Click the [Start] button and select [All Programs] [Canon SELPHY XXXX]  
[Uninstaller].
Macintosh
Double-click the   icon in Solution Disk,...

62
Using the Battery Pack (Sold Separately)
You can print outdoors or at locations without a power outlet by installing Battery Pack 
NB-ES1L (sold separately).
Proper Usage and Handling of the Battery Pack   Handling of the Battery Pack (Sold Separately) (p. 64)
Do not use the battery pack in products other than those recommended by Canon.
Installing and Charging the Battery Pack
To charge Battery Pack NB-ES1L, install it in the printer.
1
Remove the battery pack’s 
terminal cover.
When the battery...

63
„Battery Status
If the battery power is low, the printer’s power button blinks orange.
Also, the camera’s LCD monitor or printer’s LCD monitor display an error message 
(p. 70).
Change it with a fully charged battery pack or recharge the battery pack. You can also 
use the printer’s compact power adapter.
4
Close the battery cover.
5
Attach the power cord to 
Compact Power Adapter 
CA-ES100 and plug it into a 
power outlet.
6
Connect the compact power 
adapter cord to the printer.
zThe power button...

64
Appendix
Handling of the Battery Pack (Sold Separately)
Checking the Battery Status
zThe following icons and messages are displayed.
Proper Usage and Handling
zIf the battery power is low, the finished print may not be ejected into the print receptacle 
completely.
If this happens, turn the power off then on again. Paper is automatically output to the print 
receptacle. 
zAt low temperatures, battery performance is sometimes reduced and the low battery 
power icon ( ,  ) may be displayed earlier than...

65
Charging the Battery Pack
zThis is a lithium ion battery pack so there is no need to completely use or discharge it 
before recharging.
It can be charged at any charge state.
zIt takes approximately 2 hours 55 minutes to bring a depleted battery pack to a full 
charge state (based on standard Canon testing criteria).
• We recommend recharging the battery pack in a temperature of 5 - 40 °C (41 - 
104 °
F). 
• The charging time varies according to the ambient temperature and charge state.
zYou are...

66
Cleaning the Printer
„Cleaning Inside the Printer
If faint stripes appear in the printed image, a probable cause is that dust has 
accumulated inside the printer. Remove any dust using the cleaner unit included with 
your printer.
„Cleaning the Printer Casing
Wipe the casing with a soft dry cloth. If stronger cleaning is required, wipe first with a 
cloth moistened with a diluted neutral solvent, then wipe again with a soft dry cloth. If you 
use a chemical cleaning cloth, read the instructions that...

67
Troubleshooting
If the printer does not seem to be working properly, run through the checks below to see 
if you can identify and correct the problem. If you are not able to solve the problem, 
please call your dealer or contact a Canon Customer Support center for assistance.
The printer has no power.
The compact power adapter 
or power cord is not correctly 
connected.zBe sure that the compact power adapter and power cord 
are connected correctly. Be sure that the power cord is 
plugged into a...

68
Print is not ejected.
Paper has jammed inside the 
printer.zRemove the cover below 
the paper-handling slot 
(the cover can be opened 
by laying the printer down, 
placing your fingers on 
both sides of the cover and 
lifting up) and remove the 
jammed paper. 
Re-attach the cover. 
The print receptacle cover 
did not open.zIf the print receptacle cover does not open automatically 
and paper gets jammed, press the print receptacle button 
on the left side of the operation panel to open the print...