Canon Selphy Es1 User Guide

9
zBefore using the printer, please ensure that you have read and understood the safety 
precautions described below. Always ensure that the printer is operated correctly.
zThe safety precautions noted on the following pages are intended to instruct you in the safe 
and correct operation of the printer to prevent injuries or damage to yourself and other 
persons.
Devices: Printer, Compact power adapter
Battery: Battery pack (sold separately)
Safety Precautions
 WARNINGS
Do not play the supplied...

10
Power
zDo not exceed the cable and power outlet ratings when operating this product. Do not 
operate this product outside of the specified voltage rating. Check that the voltage of the 
outlet is compatible with the equipment before plugging it in.
zIf the power cord becomes damaged (if internal wiring is exposed, etc.), immediately 
unplug it from the power outlet.
zBe sure that the power cord is plugged all the way in.
zDo not damage, modify, or rest heavy objects on the power cord.
zUse only...

11
Usage Location
zDo not place the equipment on an unstable or tilted table or desk.
There is risk that the equipment may fall and cause injury.
 CAUTIONS
Equipment
zDo not block the air vents on the printer.
zDo not rest objects on the equipment.
zDo not reach into internal parts of the equipment except as specified in the operating 
instructions.
Such conditions could lead to injury, fire, electric shock or other damage.
zUnplug the equipment when you are not using it.
Leaving the equipment plugged...

12
Usage Location
zDo not use the equipment in locations that are smoky, humid, dusty, or subject to strong 
vibration.
zDo not leave the equipment in places subject to strong sunlight or close to heating 
equipment, such as the dashboard or  trunk (boot) of a car.
The above-mentioned can cause leakage, overheating or explosion, resulting in fire, burns or 
other injuries. High temperatures may also cause deformation of the casing.
zDo not use the equipment near an open flame.
Sheets ejected from the...

13
Proper Usage and Handling
Usage Location
zLeave about 15 cm (6 in.) of clearance at the front and back of the equipment and 10 cm 
(4 in.) of clearance on both sides.
Be sure to leave clearance around the paper-handling slot (at the front) so that paper has 
sufficient room to extend out from the slot during printing.
zDo not use near strong magnets or near devices that produce strong electromagnetic 
fields.
Electromagnetic radiation from devices such as TVs and game machines, and strong 
magnetic...

14
Printer
zPlease avoid turning the printer’s power on and off needlessly as the printer 
initialization consumes ink.
There may not be enough ink left for the allotted sheets in the set.
zNever use volatile compounds or insecticides on the printer, and do not allow rubber or 
vinyl material to remain in prolonged contact with the printer.
These materials may cause deformation of the printer’s casing.
zIf the printer overheats, it will temporarily  stop operating. This does not mean that the 
printer...

15
Paper
zDo not touch the paper while it is being printed.
During printing, the sheet repeatedly moves back and forth along the top of the print 
receptacle and in and out through the paper-handling slot. Please do not touch the sheet 
during this process as this could damage the printer.
zDo not allow too many sheets to accumulate in the print receptacle during printing. 
Do not allow more than 50 sheets to accumulate in the print receptacle.
Prints
zPlease avoid the following actions as they may...

16
Getting Started
Package Contents
In addition to the printer, the package contains the following accessories.
*1The included cleaner unit is inserted into the printer prior to shipment.
For information about how to use the cleaner unit, refer to 
Cleaning the Printer (p. 66).
Separately Sold Products
Easy Photo Pack E-P50 Printing cartridge for postcard size, 50 sheets
Easy Photo Pack E-P100 Printing cartridge for postcard size, 100 sheets
Easy Photo Pack E-L50 Printing cartridge for L size, 50...

17
Components Guide
„Compact Photo Printer SELPHY ES1
Power ButtonTurns the printer’s 
power on
/off.
Front View
Back View
Infrared Data Receiver Receives data by infrared 
data communication. Cartridge Compartment
The cartridge is inserted 
into this compartment.
Cartridge Cover
Battery Cover Lever Opens the battery cover.
Battery Cover Air Vents
Retractable USB Cable
The USB cable 
for connecting the camera 
is housed in here. 
Pull out the cable and 
connect it to the camera.
Card SlotsThese are for...

18
LCD Monitor
Displays images, operation mode 
and error details.
Operat ion Buttons
Used for selecting images 
and making print settings.
SET Button
Used for selecting and 
setting images.  Button (p
. 2 8) 
Displays an enlarged 
view of the image.
 Button (p . 2 8) 
Displays a reduced 
view of the image.
DISP . (D isplay) Button
Displays the information 
of the selected image.
EDIT Button
(pp . 2 8, 4 8) 
Sets various 
useful functions 
to the image to 
be printed.
MENU Button
CREATIVE Button...