Canon Selphy Es1 User Guide

							
19
About LCD Monitor and Main Display Details
„Adjusting the Angle of the LCD Monitor and Switching the Display
„Main Display Details
LCD Monitor
The angle of the LCD 
monitor can be manually 
adjusted to any angle.
DISP. (Display) Button
Each press of this button 
switches the monitor display.
 
 Operation commands
 Information
 No information
(During print confirmation) (During image playback)
Paper status (guideline)
*The trial cartridge is different from the standard oneand is not shown in this table.  Date On/Off (p. 48)
File No. On/Off (p. 48)
Borders Borderless/Bordered 
(p. 48)
Correct Red-Eye On/Off (p. 48)
Auto Optimize On/Off (p. 48)
My Colors (p. 50)
 *1/2 full or more
About 1/4 full or more
About 1/8 full or more
Empty
No Display The status is not clear
Folder number-File number Time and date
File size
Number of displayed image / 
Total number of images
Number of prints
Paper Size P 4x6 Postcard size LL size
C Card size
C Label Card size (full-sized label sheet)
BW Postcard size (black and white)
Card (p. 26) CompactFlash (CF) card/
Microdrive
SD memory card/
SDHC memory card/
Multimedia card
Memory Stick/
Memory Stick PRO
Battery status (p. 64)AC connection
Fully charged
Still operable
Battery power lowDisplay menu (p. 18)
Operation 
commands
  
						

							
20
Printing Procedure and Reference Guides
User Guide (This Guide) p. 51
Before you connect the printer to a 
computer, you must install the printer 
driver from the Compact Photo Printer 
Solution Disk. Be sure to install the 
software before connecting the printer 
to the computer using the procedure 
on page 52.
User Guide (This Guide) p. 22
Wireless printingPrinting from a 
memory card
Connect the printer to 
the camera for printing
Preparing
Installing the Software and the Printer Driver
When an Error Occurs and Troubleshooting
Printing from a 
computer
  
						

							
21
When using non-Canon digital cameras, refer to the 
user guide that came with your camera.
User Guide (This Guide) p. 58
User Guide (This Guide) 
p. 39
User Guide (This Guide) 
p. 28
Printer Software Guide (CD-
ROM included with your printer)
Camera User Guide
Direct Print User Guide
Printer Software Guide (CD-ROM 
included with your printer
)
User Guide (This Guide) p. 42User Guide (This Guide) 
p. 42
User Guide (This Guide) p. 39
Camera User Guide
Direct Print User Guide
User Guide (This Guide) p. 27
ConnectingPrinting
Troubleshooting or Error Messages: User Guide (This Guide) p. 67, 70 Contacting us for repairs:
Canon Customer Support 
Leaflet
  
						

							
22
Let’s Prepare
„Preparing a Cartridge
An ink and paper integrated cartridge is used in this printer. Prepare a cartridge with the 
size of the paper you will print.
The cartridge differs according to the paper size and ink type.
*The design of the label on the cartridge may slightly differ from the illustration above.
Separately Sold Products   Separately Sold Products (p. 16)
When opening a cartridge package, check the contents. If something seems to be 
damaged, contact the dealer for assistance.
When storing cartridges, return the cartridge to its original package to prevent dust from 
accumulating on the cartridge.
 
Paper Size Ink Type Cartridge Name (Product No.) Color of Cartridge
Postcard size
(100 x 148mm) (4 x 6 in.) ColorEasy Photo Pack E-P50
Green
Easy Photo Pack E-P100
L size
(89 x 119 mm) (3.5 x 4.7 in.) ColorEasy Photo Pack E-L50
Blue
Easy Photo Pack E-L100
Card size 
(54 x 86 mm) (2.1 x 3.4 in.) ColorEasy Photo Pack E-C25
Orange
Easy Photo Pack E-C25L
Postcard size 
(100 x 148mm) (4 x 6 in.) BW Easy Photo Pack E-P25BW Gray
Cartridge Name*
  
						

							
23
„Loading the Cartridge
Proper Handling of Cartridges Cartridge (p. 14)
1
Check that the ink sheet is tight 
and that the paper is correctly 
loaded in the cartridge.  
zWhen inserting the cartridge into the printer, if the 
ink sheet is so slack it catches, insert the cleaner 
unit and turn it slowly to take up the slack.
zIf the paper is outside of the clips, push it 
down with your finger so it is inside the clips.
•It will not be possible to use all the paper 
for printing if you overwind the ink sheet.
• Do not touch or pull out the ink sheet. 
2
Lift up the cover lever to open the 
cartridge cover, and insert the 
cartridge all the way into the 
compartment.
zPush the cartridge all the way in, so that it 
clicks into place.
zWhen you are ready to remove the cartridge, 
slide the lever down and pull the cartridge out.
•When replacing the cartridge, remove 
all paper from the print receptacle 
before printing.
• The colored paper on the top side of the cartridge is the protective paper. Load the 
cartridge with this paper still attached.
3
Close the cartridge cover.
•You can check the type and the remaining 
paper (ink) of the cartridge loaded in the 
printer by the icons in the print confirmation 
screen/printing screen or standby screen 
(p. 19).
• After the power is turned on, or immediately 
after the cartridge cover is opened/closed, 
the status icon is not displayed. 
This icon is displayed when at least one 
sheet is printed.
When the cartridge cover is open, the cover 
lever can become stuck in the lowered 
position. When this happens, raise the lever to 
close the cover.
Ink sheet
Cleaner unit
Clip
Protective paper side facing front
Cartridge lever
Remaining paper (ink)
Cover lever
  
						

							
24
zDo not reuse empty cartridges. Attempting to reuse an empty cartridge may result in 
malfunction or damage to the printer.
zDo not remove the cartridge while feeding, printing, or ejection is in progress.
„Placing the Printer
Usage Location  Usage Location (p. 13)
Refer to the figure below when placing the printer. Numbers in the figure correspond to 
the steps in the procedure below.
The battery pack (sold separately) also can be used (p. 62).
1
Place the printer on a flat area.
2
Connect the supplied power cord to the supplied Compact Power 
Adapter.
3
Insert the plug into a power outlet.
4
Connect the compact power adapter cord to the printer.
To power outlet Compact power 
adapter
15 cm (6 in.) at the front and 
back of the printer 
and 10 cm (4 in.) on both 
sides or more of open space
1
2
3
4
  
						

							
25
„Setting the Display Language (when the printer is used for 
the first time)
Set the display language for menus and messages that appear on the LCD monitor.
You can also set the display language using the following procedure.
1
Press the printer’s power button until it lights green.
zThe startup screen is displayed on the LCD monitor, followed shortly by the standby 
screen.
2
Press and hold down the SET button, and then press the MENU 
button.
Make sure that a memory card is not inserted into the printer and that a camera is not 
connected to the printer.
3
Press the  ,  ,   or   button to select the language and press 
the SET button.
zThe screen returns to the previous screen.
1
Turn the printer on, and press the MENU 
button, select [Printer Settings] with   or   
button, and then press the SET button.
2
Press the   or   button to select 
[Language] and press the SET button.
zSelect the display language using the same procedure as 
in step 3 above.
  
						

							
26
Printing from Memory Cards
Insert the memory card into the printer to print images saved on the memory card.
zDo not insert empty card adapters into the printer. The printer will not function 
properly. Always insert a card into the adapter before inserting the adapter into the 
printer. If an empty adapter has been inserted, remove the adapter, turn the power 
off, and then turn it on again.
zMake sure that a camera, computer or wireless adapter is not connected to the printer.
Compatible Memory Cards
*1LCD monitor displays the icon of the memory card inserted in the printer.
*2Use the specific adapter for the card.
*3RS-MMC stands for Reduced-Size MultiMediaCard.
*4TYPEI/TYPEII (Only 3.3 V cards are compatible.)
*5Purchase the CompactFlash Card Adapter for xD-Picture Card separately.
zSELPHY printer supports image data conforming to the Design rule for Camera File system 
(Exif compliant) and DPOF (Ver. 1.00) standards. This printer will recognize images saved in 
folders and file structures not compliant with the Design rule for Camera File system (Exif 
compliant). However, there is a possibility that images in deep file directories may not be 
recognized.
zImages saved on non-compatible memory cards might not be readable or data may be 
corrupted. Use a memory card that is compatible with the camera. For details, refer to the 
user guide included with the camera. 
zIf formatting is necessary, format memory cards in the camera. Memory cards should not be 
formatted on computers.
zImages that have been edited on a computer might not be displayed or printed successfully.
zMovies cannot be played back on this printer.
Icon*1Memory cards that can be 
directly insertedMemory cards that require a dedicated adapter
zSD memory card 
zSDHC memory card
zMultiMedia Card
zminiSD memory card*2
zminiSDHC memory 
card
*2
zRS-MMC*2 *3
zCompactFlash Card*4
zMicrodrive*4
zxD-Picture Card*5
zMemory Stick PRO
zMemory Stick
zMemory Stick PRO Duo*2
zMemory Stick Duo*2
  
						

							
27
Inserting/Removing Memory Cards
Do not load two or more memory cards at the same time.
„Removing Memory Cards
Do not remove memory cards or turn the printer off while the indicator lamp is blinking.
1
Press the printer’s power button until it lights green.
zThe startup screen is displayed on the LCD monitor, followed shortly by the standby 
screen.
2
Push the memory card all the way into the appropriate card slot.
zThe indicator lamp blinks green, and the images are displayed on the LCD monitor. If the 
image is not displayed, make sure that there are images on the memory card and that 
the memory card is fully inserted. Images cannot be displayed if a camera or wireless 
adapter is connected. 
• Insert memory cards with the top side up.
• Push the SD memory card, Memory Stick or their variants in until it clicks.
*A dedicated adapter is required (p. 26).
LCD monitor 
 About LCD Monitor and Main Display Details  (p. 19)
CF card / 
Microdrive / 
xD-Picture Card
*
SD memory card / 
SDHC memory card / 
Multimedia card / 
miniSD memory card
* / 
miniSDHC memory card* / 
RS-MMC*
Memory Stick / 
Memory Stick Duo* / 
Memory Stick PRO / 
Memory Stick PRO Duo
*
Indicator LampCF Card Slot
SD Card Slot
zSD card slot
Push the memory card with your finger until it clicks 
and then release it.
zCF card slot
Press the CF card eject 
button.
  
						

							
28
Single Photo Print
Display the image to be printed on LCD Monitor and print the image. 
You can specify the number of prints of the displayed image to print. Images can also be 
trimmed.
Buttons available for the following functions
1
Turn the printer on, and insert the memory card into the 
appropriate memory card slot (p. 27).
2
Press the   or   button to display the image 
to print.
zPressing the DISP. (display) button cycles through the LCD 
monitor display modes (p. 19).
zIf you press the   button, nine images are displayed 
together (index playback). During index playback, you can 
select images with the   or   button. Pressing the   
button ends index playback, and the display returns to the single image display. Printer 
switches to index playback even if the   or   button is held down.
zIf you press the   button during index playback, you can switch to jumping over nine 
images at a time. The   and   button display the previous or the next nine images. 
You can display the first nine images or the last nine images by pressing the   or   
button while holding down the SET button. Press the   button to return to index 
playback.
zEach time you press the   button, the display zooms in one level. During this enlarged 
display, you can change the display position using the  ,  ,   or   button. Each 
time you press the   button during this enlarged display, the display zooms out one 
level.
  Button
  Button
  Button
  Button
EDIT ButtonSET Button
MENU Button CREATIVE 
Button
PRINT/STOP 
Button Button Button
DISP. (Display) 
Button
• Press the MENU button to  return to the previous screen.