Canon Selphy Es1 User Guide

							
49
„Page Layout
The following six layouts can be selected when printing by [Multi Photo Print], [Print All 
Photos] or [DPOF Print]. The available layout differs according to the paper used. Check 
which layouts are available in the table below.
1
Turn the printer’s power on, and press the MENU button (p. 27).
2
Press the   or   button to select [Printer 
Settings] and press the SET button.
[Date]/[File No.]/[Borders]/[Correct Red-Eye]/[Auto 
Optimize] can also be set by selecting settings in each of 
the printing confirmation screens.
3
Press the   or   button to select the desired 
setting item, and press the   or   button to 
change the setting value.
zWhen [Bluetooth], [Language] or [Reset All] are selected, 
press the SET button to display the sub menu. Select the 
desired 
item to be set using the ,  ,   or   button, 
and press the SET button.
When [Reset All] is selected, all settings (except Date Format and Language) can be 
returned to their defaults. In the Reset All confirmation screen, press the   or   
button to select [OK] and press the SET button.
4
Press the MENU button.
zThe screen returns to the main menu.
4-up
1-up ([Borderless]/[Bordered] can be 
selected in [Borders].)
Index
2-up
8-upFixed Size
(A white border is left on 
the right side of the 
printed image. So you 
can write your message 
with an oil-based pen.)
  
						

							
50
†Available layouts for each paper size
*The file number is printed when both Date and File No. are set to [On]. 
When the print mode is set to [Print All Photos] and Page Layout is set to [Index], all of the 
images in memory card can be printed out as an index.
„My Colors
The My Colors function simply changes the color of images to any desired color before 
the image is printed out. For example, it changes the red, green and blue color balance, 
or lightens or darkens skin tone. Note, however, that images may get coarser or the color 
may not be reproduced as intended depending on the photographic conditions.
*If the image contains colors that are the same as human skin, those colors will also bechanged. Skin color effects sometimes are not produced depending on the color of the skin.
Paper Size1-up2-up4-up8-upIndex*Fixed Size
Postcard size print{{{- {70.0 x 100.0 mm (2.8 x 3.9 in.)
L size{{{- {89.0 x 55.0 mm(3.5 x 2.2 in.)
Card size{{{{{- 
OffThe image is printed out without the My Colors function applied.
VividContrast and color depth are enhanced to produce sharp hues.
NeutralContrast and color depth are suppressed to produce a subdued hue.
SepiaImages are printed out in sepia tones.
B/WImages are printed out in black and white.
PositiveFilmThis setting makes red, green or blue colors more intense like the 
[Vivid Red], [Vivid Green] or [Vivid Blue] effects. It can produce 
intense natural-appearing colors like those obtained with positive film.
Lighter Skin*Skin tones are reproduced in a lighter tone.
Darker Skin*Skin tones are reproduced in a darker tone.
Vivid BlueThe color blue is enhanced. This is good for printing subjects 
containing lots of blue, such as the sky and the sea, more vividly.
Vivid GreenThe color green is enhanced. This is good for printing subjects 
containing lots of green such as mountains, new growth, flowering 
plants and lawns, more vividly.
Vivid RedThe color red is enhanced. This is good for printing subjects 
containing lots of red, such as red flowers and red cars, more vividly.
  
						

							
51
Connecting to a Computer for Printing
System Requirements
Please install the software on a computer meeting the following minimum requirements.
„Windows
„Macintosh
*EOS Utility (an application for EOS DIGITAL cameras) supported on PowerPC only
zA CD-ROM drive is required to install the software.
zEven when system requirements are met, not all computer functions can be guaranteed.
zMacintosh software cannot be used on disks formatted in the UFS (Unix File System) 
for mat.
OS Windows 2000 Service Pack 4
Windows XP (Including Service Pack 1 and Service Pack 2)
Computer Model The above OS should be pre-installed on computers with built-in USB  ports.
CPU Pentium 500 MHz or higher processor
RAM 256 MB or more
Interface USB
Free Hard Disk 
Space • Canon Utilities
- Easy-PhotoPrint:
 65MB or more
- ZoomBrowser EX:
 200 MB or more
• Canon SELPHY 
ES1 Printer Driver: 
4 MB or more (the amount of free space required for installation)
Display 1,024 x 768 pixels/High Color (16 bit) or better
OS Mac OS X (v10.2 - v10.4)
Computer Model The above OS should be pre-installed on computers with built-in USB  ports.
CPU PowerPC G3/G4/G5 or Intel processor*
RAM 256MB or more
Interface USB
Free Hard Disk 
Space • Canon Utilities
- ImageBrowser: 200 MB or more
• Canon SELPHY 
ES1 Printer Driver:
4 MB or more (the amount of free space required for installation)
Display 1,024 x 768 pixels/32,000 colors or better
  
						

							
52
Installing the Printer Driver and the Software
The Compact Photo Printer Solution Disk contains software that your computer will 
require for printing. Install the printer driver and the software according to the following 
steps.
The instructions in this section are intended for Windows XP and Mac OS X (v10.3). If you 
are using another version of OS, actual screen contents and procedures may differ slightly 
from those indicated here.
Windows
zBe sure to install the software and the printer driver before connecting the printer to the 
computer.
zBe sure to log on with Administrator privileges (computer system administrator) when 
installing the software.
Install the printer driver to your computer.
1
Close any programs that are running.
2
Place the Compact Photo Printer Solution Disk in the CD-ROM drive.
zHow to display the installer panel If the installer panel does not automatically appear, use the following procedure to
display it.
1. Click the [start] button and select [My Computer]. For Windows 2000, double-click the [My Computer] icon on the desktop.
2. Right-click the CD-ROM icon and select [Open]. 3. Double-click the SETUP.EXE
* icon ( ).
*The “.EXE” extension may not display depending on the computer used.
3
Click the Printer Driver [Select printer] button.
4
Click the printer you are using.
Installer panel
  
						

							
53
Next, install the software to your computer.
5
Click [Yes] if you consent to all the conditions of the software 
license agreement.
zThe installer starts.
6
When the screen below appears, connect the printer to the 
computer with a commercially available USB cable and turn the 
printer’s power on.
Refer to Connecting the Printer to Your Computer  (p. 58) on how to connect.
zFollow the onscreen instructions to proceed.
7
When a dialog box appears instructing that the installation is 
complete, click [Finish].
zRestart your computer when a dialog box appears instructing you to do so.
8
Click the Application Software [Easy Installation] button.
zSelect [Custom Installation] to select programs for individual installation.
zIf the installer panel does not appear, refer to  How to display the installer panel (p. 52).
  
						

							
54
9
Follow the onscreen instructions and click [Install] when the 
screen for confirming the installation details appears.
10
Follow the onscreen instructions to proceed. When a dialog box 
appears instructing that the instal lation is complete, click [Finish].
zRestart your computer when a dialog box appears instructing you to do so.
11
When the computer desktop displays,  remove the Solution Disk 
from the CD-ROM drive.
  
						

							
55
Macintosh
Be sure to install the software and the printer driver before connecting the printer to the 
computer.
1
Close any programs that are running.
2
Place the Compact Photo Printer Solution Disk in the CD-ROM 
drive, and double-click the   icon in the CD-ROM window.
zThe installer panel appears.
3
Click the Printer Driver [Select printer] button.
4
Click the printer you are using.
5
Click [Agree] if you consent to al l the conditions of the software 
license agreement.
zThe installer starts.
Installer panel
  
						

							
56
Next, register your printer in the Printer List.
6
Select [Easy Install] and then click the [Install] button.
zFollow the onscreen instructions to proceed.
zRestart your computer when a dialog box appears instructing you to do so.
7
Connect the printer to the computer with a commercially available 
USB cable and turn the printer’s power on.
For directions on connecting the printer, see  Connecting the Printer to Your Computer (p. 58).
8
Double-click the [Printer Setup Utility] or [Print Center] icon in 
[Applications] [Uti lities] folder.
zThe Printer List window appears.
9
Click the [Add] button.
  
						

							
57
Next, install the software to your computer.
10
Select [USB], select the printer name, and then click the [Add] 
button.
11
Close the window by clicking   in the upper left-hand corner.
12
Click the Application Software [Install] button.
13
Select [Easy Installation] and then click [Next].
zSelect [Custom Installation] to select programs for individual installation.
14
Follow the onscreen instructions to proceed. When a dialog box 
appears instructing that the installation is complete, click [OK].
  
						

							
58
Connecting the Printer to Your Computer
„Notes about connection
zDo not put your computer into the standby mode (or sleep mode) while the printer is 
connected to a USB port.
zIf you accidentally do so, do not disconnect the USB cable from your computer while it is in 
the standby mode; instead, leaving the USB cable connected, first return your computer to 
its normal mode. If you remove the USB cable while your computer is in the standby 
mode, your computer may not be able to return to its normal mode. For details on your 
computer’s standby mode, refer to the documentation provided with your computer.
Before connecting the printer to a computer, make sure that a memory card is not 
inserted into the printer and that the printer is not connected to a camera.
zThe printer may not function properly.
When using the USB cable, be sure to connect the printer directly to your 
computer.
zIf you connect the USB cable to a USB hub, the printer may not function 
properly.
Do not use other USB devices (with the exception of a USB mouse or USB 
keyboard) at the same  time as the printer. The prin ter may not function properly.
zDisconnect the other USB devices from your computer and then reconnect the 
printer.
Do not connect two or more compact photo printers to the same computer via the 
USB interface at the same time.
zThe printers may not function properly.
For Windows, when connecting the printer to your computer, we recommend that 
you connect it to the same USB port you used to install the printer driver.
zIf you connect the printer to a different USB port, Windows may create a copy 
of the printer driver. This depends on your Windows version and the printer 
driver, and does not affect the operation of the printer.
To delete a copy of the printer driver, proceed as follows:
1. Disconnect the USB cable from your computer.
2. Delete the copy of the printer driver as follows (do not use the uninstaller.) (1) For Windows XP, click the [start] button and select [Control Panel] [Printers and Other Hardware] [Printers and Faxes].
For Windows 2000, click the [Start] button and select [Settings] [Printers].
(2) Right-click the copy of the printer driver and then select [Delete] on the shortcut menu.
3. Restart your computer. Connect the printer to the USB port you used to install the printer driver.