Canon scanner imageFORMULA P208II User Manual

30
Scanning Procedure1
Set the Auto Start switch at the rear panel of the scanner to ON and 
then connect the scanner to the computer.
2Open the feed tray, turn ON the scanner, and then load the document.
For details, Loading a document.
When you open the feed tray, the Start button on the scanner lights and the 
auto play screen appears.
If you are using Windows XP and you set the Auto Start switch to ON 
before connecting the scanner to the computer, a message requesting 
that you restart your computer...

31
For details, Loading a document.
When you open the document feed tray, the Start button on the scanner lights 
and the Finder window shown below opens automatically.
If you click the [CaptureOnTouch Lite Launcher] icon, CaptureOnTouch Lite 
starts up and the main screen opens.
To run CaptureOnTouch Lite, both the [CaptureOnTouch Lite for Mac] 
folder and the [ONTOUCHLITE] folder must be mounted.
2Double-click the [CaptureOnTouch Lite Launcher] icon.
The selected [Select document] panel will be...

32
3Click the output panel for the scan image application from [2 Output].
The selected [Select document] panel will be displayed in orange. To edit the 
[Output] panel, see Setting the output.
4Click the [SCAN] button.
The document is scanned. While scanning is in progress, the number of pages 
scanned is displayed in addition to the scanner settings.
When the scan is finished, the [Scanned image preview screen] opens.
If you configure scanning conditions that consume a large amount of the 
computers...

33
If scanning continuously, set the next document, and click the [Scan 
more pages] button to start the document scan.
5After confirming the scanned image, click the [Finish] button.
 
To edit scan images, see [Operations for the scanned image edit window].
Click the [   ] button to edit the output settings. Setting the output
Click the [Cancel] button to discard the scanned image and return to the main 
window.
6When the output has finished, a popup window will be displayed. If 
saving the scanned...

34
Starting and Exiting CaptureOnTouch Lite
Once you start CaptureOnTouch Lite it remains present in the 
system.
When the Auto Start switch on the rear of the scanner is not in the 
ON position, CaptureOnTouch Lite will not start. For details, refer to 
Connecting the Scanner to the Computer
Double-click   (CaptureOnTouch icon) in the taskbar to start 
CaptureOnTouch and display the main window.
To close the CaptureOnTouch Lite window, click   at the top of the 
window. This closes the window, but...

35
1Click  (CaptureOnTouch Lite icon) in the menu bar, and select 
[Exit] from the menu.
2Drag and drop the [ONTOUCHLITE] folder and [CaptureOnTouch Lite 
for Mac] folder onto the [Trash] icon.
3Close the feed tray.
The scanner turns OFF.
4Disconnect the USB cable from the scanner and computer.
Operations for t he scanned image edit 
window
When scanning has finished, a preview window of the scanned 
image will be displayed.
To display the edit window in the preview window, click   on the tool bar....

36
(1)Toolbar
This tool bar enables operations to thumbnails and preview 
images.
(2)Thumbnail Display Area
Thumbnails of the scanned documents will be displayed. You can 
implement the following operations.
Click a thumbnail to display a preview of the scanned image in the 
preview window.
Drag a thumbnail to change pages.
(3)Preview Area
The preview images of sc anned documents are displayed.
(4)Edit window
You can edit scanned documents.
Click an item to open the edit window.
Click the [Restore]...

37
[Color adjustment] (Manual settings)
Move the slider to the left or right to adjust the brightness and contrast of 
the image, checking the preview image.
Click the [Grayscale] button to render the image in grayscale.
Click the [Black and White] button to render the image using 2 values: 
black and white.
When adjustment is finished, click the [OK] button. To cancel the 
adjustment, click the [Back] button.
[Image alignment]
Click [Image alignment] to display.
The preview image or the slider can be...

38
[Rotate]
Click [Rotate] to display.
The scanned image can be rotated in 90 degrees to the left or the right. 
The rotation can be adjusted according to the preview image.
(5)Information Display Area
The information regarding the Select document and Select output 
is displayed.
Click the   button, and the Output Settings dialog will appear.
Click the [Scan more pages] button to continue the scanning.
Clicking the [Cancel] button will  destroy the scanned images and 
return to the top screen.
When...

39
Scan settings
Makes the scan settings.
[Color mode]
Select the color mode for scanning from below.
[Page Size]
Select the paper size of the document to be scanned.
If you specify [Match original size], the page size of the scanned document 
is detected and the images are saved at the detected size.
[Dots per inch]
Select the resolution.
Select [Detect automatically] and the software will automatically scan the 
document at the optimum resolution.
[Scanning Side]
Select the scanning side of the...