Canon scanner imageFORMULA P208II User Manual

80
Select [Advanced Text Enhancement II] in the [Color mode] setting. The 
background behind the text is removed or processed so that the text is 
emphasized for better readability.
Practical Examples
To correct tilted documents and images
Place a check in [Automatically straightens skewed] under the [Basic] tab, 
and then click [Setting] to display the [Deskew Settings] screen. 
Select a correction method and click [OK]. 

81
Click the [Deskew] check box to ON. You can select either [Straightens 
with angle of fed documents] or [Straightens with angle & contents of fed 
documents]. 
Practical Examples
When you want to detect multiple pages fed at the same time
Select the [Double Feed Detection] check box on the [Feeding] tab. You 
can enable the [Detect by Length]. 

82
Select the [Double Feed Detection] check box.
Practical Examples
When you want to match the orientation of images to the text 
when scanning a mixture of pages with different text 
orientations
Select [Text orientation recognition] in [Document Orientation] on the 
[Others] tab. The text orientation on each page is detected, and the 
scanned image is rotated in 90-degree increments to correct the 
orientation. 

83
Select the [Text Orientation Recognition] check box. The text orientation 
on each page is detected, and the scanned image is rotated in 90-degree 
increments to correct the orientation.
Practical Examples
How to scan both sides of a card as an image on one sheet of 
paper
If you want to scan the front and back of a card in a single scan, in the 
[Feeding] tab, click the [Combine Front & Back Card Images] check box to 
ON.  
For directions on how to feed a card into the scanner, refer to Loading...

84
Practical Examples
When you want to set the scanner conditions automatically
Set [Full Automatic Mode] in [User Preference] to scan with scanning 
conditions that match the document.
 For a landscape card, the image is oriented so that the 
lettering on both sides is in the same direction.
 For a portrait card, the lettering on each side is oriented in 
opposite directions.  

85
Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning 
conditions that match the document.
Practical Examples
When you want to save a scanner driver setting
When you finish configuring a setting, click the [Save] button of [User 
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting from the 
list with the [Delete] button, and save or load a configuration file with the 
[Back Up] or [Restore] button.
When [Full Automatic Mode] is...

86
When you finish configuring a setting, select [Add/Delete] of [Favorite 
Settings] to save the setting.
Clicking the [Add] button registers the current setting to [Favorite Setting 
List]. Use the [Delete] button to delete a setting from the list.
The preregistered [Full Automatic Mode] cannot be deleted from 
[Favorite Setting List]. 

87
Chapter 10 Regular Maintenance
Clean the scanner and perform maintenance on a regular basis as 
described below to maintain peak scanning quality.
Cleaning the Scanner ......................................................................... 87
Cleaning the Scanning Glass and the Rollers ................................. 88
When cleaning the scanner and the inside of the scanner, turn the 
power OFF and disconnect the power cord from the power outlet.
 Do not use spray cleaners to clean the scanner....

88
Cleaning the Scanning Glass and the Rollers
If scanned images contain streaks, or if the scanned documents 
become dirty, the scanning glass or rollers inside the scanner may 
be dirty. Clean them periodically.
1Open the feed tray.
2Open the feeder cover.
3Use compressed air to remove dust and paper particles from the 
inside of the scanner.
4Remove any dirt from the scanning glass, separation pad and rollers 
inside the scanner (parts   shown in the figure).
Use a clean dry cloth to wipe off any dirt...

89
Chapter 11 Detaching and attaching the separation pad
When replacing the separation pad, perfo rm the following steps to detach 
it from and attach it to the unit. 
When to replace the separation pad ................................................. 89
Detaching and attaching the separation pad ................................... 90
When to replace th e separation pad
The separation pad inside the scanner is a consumable item and wears 
with scanner use. A worn separation  pad is no longer able to...