Canon scanner imageFORMULA P208II User Manual

20
Chapter 4 Connecting the Scanner
Connect the scanner to the computer and power outlet.
Connecting the Scanner to the Computer........................................ 20
Turning the Power ON ........................................................................ 21
Connecting the Scanner  to the Computer
Connect the scanner to the computer.
Connecting the Scanner to the Computer
Turn OFF the Auto Start switch on the rear of the scanner, and use the 
supplied USB cable to connect the scanner to the...

21
Auto Start Switch
There is an Auto Start switch at the rear of the scanner for setting whether 
to operate the scanner as a storage device.
Depending on the position of the Auto Start switch, the scanner operates 
as shown below.
 Turn the Auto Start switch ON or OFF before you connect the scanner to a computer. If it is turned ON or OFF after the scanner is connected to a 
computer, the scanner may not operate properly.
 When you use the scanner with the Auto Start switch turned ON, the 
computer...

22
When the scanner is turned on for the first time, the balloon 
message shown below appears on the Windows task bar. If you 
wait a while, automatic scanner recognition will end and the 
scanner will become ready to use.
When the scanner is properly connected to the computer, the   
(CaptureOnTouch) icon appears on the taskbar as follows.
If the taskbar icon appears as   or   the scanner is not 
properly connected to the computer. Check the status of the power 
and USB cable. 

23
Chapter 5 Placing Documents
This section describes how to load a document for scanning.
Documents .......................................................................................... 23
Loading a document........................................................................... 25
Loading cards ..................................................................................... 27
Documents
The scanner can scan documents ranging in size from business 
cards and checks to LTR/A4/LGL. The...

24
Scanning the following types of documents can cause a paper jam or 
malfunction. To scan such a document, make a photocopy of the 
document and then scan the photocopy.
Postcard
Business Card
Card
 If you place cards to be fed horizontally, they may not be ejected 
properly, and cards that get jammed may be damaged when you 
remove them. Take care of the orientation when placing cards.
 Embossed cards may not be able to be scanned correctly, depending 
on the type of embossment.
A document must meet...

25
Loading a document
1Open the feed tray to turn ON the scanner.
2As shown in the figure, with the document feed tray opened, pull the 
tray toward you.
As shown in the figure, pull the center part of the document feed tray 
(see enlarged image) all the way out toward you.
3Load the document.
 Before you load the document, thoroughly fan the pages.
 Straighten out the creases and folds at the ends of the manuscript.
 If the document is curved, straighten the document before 
loading it.
 Load the...

26
When the document is inserted all the way in, the paper pressure 
holds the document in place automatically.
Be sure to load the paper straight in.
(If the document is slanted when loading to the back of the paper 
pressure, it will not be fed correctly.)
 A scanned document is ejected behind the scanner. Do not place any 
objects behind the scanner.
 If double-feeding occurs, reduce the number of pages that you load 
into the scanner at one time.
 When scanning small size of multiple documents...

27
Loading cards
When scanning plastic cards, scan cards one at a time using the 
following procedure.
1Open the document feed tray.
2As shown in the figure, with the document feed tray opened, pull the 
tray toward you.
As shown in the figure, pull the center part of the document feed tray 
(see enlarged image) all the way out toward you.
3Vertically insert the card directly into the feed inlet, and with the back 
facing up.
4Adjust the document guide so that it makes contact with both edges 
of the...

28
Set the document feed tray from the pulled out position back to its 
original position.
 Push in (push back) the document feed tray in the direction of the 
arrow.
6Close the feed tray. 

29
Chapter 6 Scanning with CaptureOnTouch Lite
This section describes how to sc an when using CaptureOnTouch Lite.
Scanning with CaptureOnTouch Lite ................................................ 29
Starting and Exiting CaptureOnTouch Lite ...................................... 34
Operations for the scanned image edit window .............................. 35
Select document settings .................................................................. 38
Setting the output...