Canon scanner imageFORMULA DR6010C User Manual

Chapter 7  ISIS/TWAIN Driver Settings
7-22
With the [Standard Feeding] Feeding Option 
With the [Automatic Feeding] or [Panel Feeding] Feeding Option 
[Auto]
Each batch of documents is saved with different file names.
[Panel]
Document batches are separated when the [Batch Separation] button on the Scan Panel is pressed.  
(See “Scan Panel,” on p. 3-21.)
 
[Patchcode]
Batches are separated whenever a patchcode sheet is detected between documents. (See “3-6 
Using Patchcode Sheets,” on p. 3-23.)
☞When...

Chapter 7  ISIS/TWAIN Driver Settings
7-23
[Barcodes] Button
This is enabled when the optional barcode module is installed: click it to open the Barcode dialog 
box and make settings affecting barcode detection in documents. For details, see the ISIS/TWAIN 
driver Help, or contact your supplier.
[Addon] Button
This button opens the [Addon] dialog box, where you can make setting for adding text or bitmap 
images to scanned document images. (See “Addon Dialog Box,” on p. 7-24.)
  

Chapter 7  ISIS/TWAIN Driver Settings
7-24
Addon Dialog Box
The [Addon] dialog box provides access to the following dialog boxes, where you can make setting 
for adding text or bitmap images to scanned document images. 
The [Addon] dialog box enables you to make setting for adding text or bitmap images to scanned 
document images.
 
Addon Dialog Box
Bitmap Settings for the Addon Dialog Box (See p. 7-27.)
Character String Settings for the Addon 
Dialog Box (See p. 7-27.)
Second Counter Settings Dialog...

Chapter 7  ISIS/TWAIN Driver Settings
7-25
[Addon] Check Box
Select this check box to apply text or bitmap images to scanned document images.
Imprinter Side
Select the side on which to apply your text or images.
[Enable] Check Box
Select this check box to enable the application of add-on text.
Tex t
Enter the text string to be applied.
☞The following characters can be entered.
 Numerals 0 to 9
 Alphabetic characters A to Z and a to z
 Punctuation and symbols: ! # $ % &( ) * + - . , / : ; < > =?@[ ] { } ~...

Chapter 7  ISIS/TWAIN Driver Settings
7-26
[Down arrow] abbreviation: 
Inserts a down arrow (L) symbol.
[Left arrow] abbreviation: 
Inserts a left arrow () symbol.
[Right arrow] abbreviation: 
Inserts a right arrow (J) symbol.
☞Special text can only be entered for one type of counter. If entered for two counter types, the 
Preview panel displays an error message.
 
☞Add-on text may consist of up to 96 characters. However, the actual number of characters may be 
limited by font size. If the number of...

Chapter 7  ISIS/TWAIN Driver Settings
7-27
☞When add-on text is applied to an image, the size of the characters depends on the scan 
resolution.
[Enable] Check Box
Select this check box to enable application of bitmap images to scanned images.
☞When adding a bitmap image, it is processed when scanning is started. This can cause some 
delay before scanning actually begins, depending on the size and settings of the bitmap image.
☞When adding a bitmap image, a message is displayed until scanning begins....

Chapter 7  ISIS/TWAIN Driver Settings
7-28
 
[Horizontal Offset]
Enter the desired offset from the edge of the document feeder inlet.
 
☞When applying an add-on to the front side, enter the offset from the left side of the feeder inlet.
☞When applying an add-on to the back side, enter the offset from the right side of the feeder inlet.
☞The entered offset is the distance to the left end of the applied text (or bitmap image.)
[Vertical Offset]
Enter the distance from the top edge of the page.
 
Print...

Chapter 7  ISIS/TWAIN Driver Settings
7-29
Start Value
Enter the start value for the counter.
Increment
This is the counter increment value. The counter increments by the value entered here.
Increment Trigger
Specifies the type of event that triggers a counter increment.
[New File] (ISIS driver only)
The counter increments when a batch separation occurs according to the Batch Separation settings 
on the [Others] tab sheet. (See “Batch Separation (ISIS driver only),” on p. 7-21.)
[Every Page]
Increments...

8-1
Chapter 8Job Registration Tool Settings
This chapter describes Job Registration Tool settings for job functions. Refer to Section “3-4 Job 
Function,” on p. 3-9 for details.
8-1 Starting the Job Registration Tool
The Job Registration Tool is a TWAIN-compliant application program that installs with the ISIS/
TWAIN driver, and is started by the following procedure. 
1Click the Windows [Start] button, and click then [Programs] ([All Programs] for  Windows XP) 
Æ [DR-6010C] Æ [Job Registration Tool].
The...

Chapter 8  Job Registration Tool Settings
8-2
8-2 Job Registration Tool Settings Dialog Box
The Job Registration Tool Settings dialog box provides access to the [New/Editing ] dialog box and 
the [Admin] dialog box, and the New/Edit dialog box provides access to function setting dialog 
boxes. (See “[New/Editing] Dialog Box,” on p. 8-4.)
Job Registration Tool Dialog Box 
(p. 8-3)
[New/Editing] Dialog Box (p. 8-4)
Access SettingScanner Settings Dialog Box
PDF/TIFF Settings [Admin] Dialog Box (p. 8-8)