Canon scanner imageFORMULA CR190i II User Manual
Have a look at the manual Canon scanner imageFORMULA CR190i II User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 Make the following adjustments to maintain scanning quality. Replacing the Ink CartridgeThe ink cartridge needs to be replaced if the printed text becomes scratchy or faint even if you have cleaned the ink jet nozzle. Replace the ink cartridge according to the following procedure below. IMPORTANT The ink disposal tank must be replaced when the ink cartridge is replaced. To replace the ink cartridge, turn the scanner OFF before removing the Top Cover. After the ink cartridge is set, replace the Top Cover, and then turn the scanner back ON. Finish up the unpacked ink cartridge as soon as possible. More frequent cleaning of the ink cartridge is required if long time elapses after unpacking. NOTE •Use a Canon ink cartridge. (See “About the Ink Cartridge,” on p. 23.) •Do not use more than one cartridge by rotation. If you do so, applications cannot check the ink level precisely. ARemove the Top Cover. BSqueeze the Print Position Adjustment Lever, and lift it up to the top position. CPush the ink cartridge backward, and then remove the ink cartridge. CAUTION Do not touch the ink jet nozzle right after imprinting. The nozzle may be very hot. Maintenance
52 DSet the ink cartridge.For more information, see “Setting the Ink Cartridge and Adjusting the Print Position,” on p. 23. ECarefully replace the Top Cover. Replacing the Ink Disposal Tank When the following conditions appear, you have to replace the ink disposal tank according to the following procedure. When the ink cartridge is replaced. When clumpy ink appears on the ink disposal tank as shown below. The replacement ink disposal tank is not included with the scanner. Purchase an ink disposal tank, as shown below. Compatible ink disposal tank: 4623B002 AOpen the Ink Disposal Tank Pocket.
53 BRemove the ink disposal tank. WARNING Do not print without the ink disposal tank. Doing so may cause a malfunction. NOTE •Be careful not to get dirty with ink. •When you discard the ink disposal tank, put it in the plastic bag in the box of the ink disposal tank. CAttach the ink disposal tank. DClose the Ink Disposal Tank Pocket. Ink Disposal Tank
54 Replacing the Rollers When rollers are worn, paper jams and double feeds tend to occur. You can replace the rollers (Pickup Roller, Feed Roller, and Separation Roller) according to the following procedure. The exchange roller kit is not included with the scanner. Purchase an exchange roller kit separately, as shown below. Compatible exchange roller kit: 4623B001 ARemove the Top Cover. BRemove the Roller Cover. COpen the Feed Supporter to the left. DPinch the Separation Roller at the rim and the fixing lever, and then remove it with pressing the Separation OFF Mode Button. Feed Supporter Fixing Lever
55 NOTE If the Separation Roller is not removed easily because of the fixing lever position, turn the Pickup Roller in anticlockwise direction by hand. EPinch the Feed Roller at the rim and the fixing lever, and then remove it. FPinch the Pickup Roller at the rim and the fixing lever, and then remove it. NOTE If the Pickup Roller is not removed easily because of the fixing lever position, turn the Pickup Roller by hand. GAttach the Pickup Roller. IMPORTANT Push down the roller until it clicks into place. Fixing Lever Fixing Lever
56 HAttach the Feed Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. IAttach the Separation Roller with pushing the Separation OFF Mode Button. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. JClose the Feed Supporter to the right. KReplace the Roller Cover.
57 LCarefully replace the Top Cover. MAdjust the Adjustment Dial to 5. For more information, see “Adjusting the Separation Roller Gap,” on p. 57. Adjusting the Separation Roller Gap If double feed should occur too often, adjust the Separation Roller gap according to the following procedure. ASlide the Adjustment Dial Cover to the left. BAdjust the Adjustment Dial.Turn the Adjustment Dial to the right 3 clicks. If documents are not fed after the above operation, turn the Adjustment Dial back to the left 1 click. CSlide the Adjustment Dial Cover to the right. CAUTION Do not use the Adjustment Dial any other time except when adjusting the Separation Roller gap. Turning the Adjustment Dial too much may damage the scanner. Adjustment Dial Turn the dial to the left to widen the gap, and turn it to the right to narrow the gap.
58 Scanner Specifications Power consumption ■Use the recommended operating environment for the ink cartridge when using the imprinter. ■ You can use the functions noted above if your software supports them. ■ These functions may not work depending on your computer’s capabilities and the software you are using. Specifications are subject to change without notice. Specifications Type Desktop sheet feed Document size Height: 68 to 108 mm (2.7 to 4.3) Length: 120 to 245 mm (4.7 to 9.6) Thickness: 0.08 to 0.20 mm (0.003 to 0.008) Weight: 64 to 157 g/m 2 (17 to 40 lb bond) Document feeding Automatic / Not separate Scanning method Contact image sensor (CMOS) Light source LED (CR-135i II UV/CR-190i II UV: UV LED) Scanning side Simplex/Duplex Scanning mode Black-and-white, Fine text filtering, Error diffusion, 256 level grayscale, 16 level grayscale, UV Scan Scanning resolution (primary scan lines x secondary scan lines) 100 x 100 dpi, 120 x 120 dpi, 150 x 150 dpi, 200 x 200 dpi, 240 x 240 dpi, and 300 x 300 dpi (UV Scan mode can scan at up to 200 x 200 dpi) Scanning speed (200 dpi American checks) CR-135i II: 135 cpm CR-190i II: 190 cpm CR-135i II UV: 120 cpm (UV Scan mode) CR-190i II UV: 160 cpm (UV Scan mode) Automatic feeder capacity Load limit of less than 25 mm (1.0) (within the load limit mark) Automatic document feed capacity Up to 250 sheets (90 g/m 2 (24 lb bond)) Make sure stacks do not exceed 25 mm in height (including curling). Interface Hi-Speed USB 2.0 Other functions Automatic paper size detection, Ultrasonic double feed detection, Dropout color, Deskew Dimensions 214 mm (H) x 476 mm (W) x 272 mm (D) (8.4 (H) x 18.7 (W) x 10.7 (D)) Weight CR-135i II: Approximately 8.0 kg (17.1 lb) CR-190i II: Approximately 8.4 kg (18.5 lb) Power requirement AC 120V (60 Hz) or AC 220-240V (50/60 Hz) Scanning Sleep mode CR-135i II/CR-135i II UV120V 220-240V43W or less 2.7W or less CR-190i II/CR-190i II UV120V 220-240V49W or less 2.7W or less Noise Less than 72 dB Operating environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH
59 Index A Adjusting the Print Position ............................................. 23 Adjustment Dial ......................................................... 15, 57 Adjustment Dial Cover .................................................... 15 Air Vent ........................................................................... 16 Amount loaded ................................................................ 32 B Back Maintenance Cover ................................................ 15 Built-in Nozzle Cleaning Pad .................................... 14, 49 C Cleaning Feed path ................................................................. 43 Main unit ................................................................... 43 Cleaning Card ................................................................. 50 Connector ....................................................................... 16 D Daily Cleaning ................................................................. 43 Documents ...................................................................... 30 Document ................................................................. 30 Envelope ................................................................... 31 How to place documents .......................................... 32 Double Feed Detection ................................................... 32 E Eject Pocket .............................................................. 15, 35 Eject Stopper ............................................................ 15, 32 Exterior Dimensions ........................................................ 16 F Features of the CR-135i II/CR-190i II .............................. 12 Feeding Trouble .............................................................. 40 Flapper ............................................................................ 35 Front Maintenance Cover ................................................ 14 Function Button ............................................................... 14 H Handling ............................................................................ 9 I Ink Cartridge ........................................................ 14, 23, 51 Ink Disposal Tank ............................................................ 53 Ink Disposal Tank Pocket .......................................... 16, 52 Ink Jet Nozzle .................................................................. 49 Installation Location ......................................................... 10 J JOG Button ................................................................ 14, 34 L Load Limit Mark ............................................................... 32 M Magnetic head ................................................................. 48 Magnetic Head for MICR ................................................. 14 Maintenance .................................................................... 51 Moving the Scanner ......................................................... 11 N Number of pages loaded ................................................. 32
60 O Operating Environment ................................................... 18 Operation Buttons ........................................................... 14 P Power Cord ............................................................... 13, 21 Power Cord Connector ................................................... 16 Power Supply .................................................................. 11 Power Switch .................................................................. 14 Print Position Adjustment Lever ................................ 23, 51 R Ranger ............................................................................ 27 Recognizing the scanner ................................................ 22 Roller Cover .................................................................... 14 Rollers ....................................................................... 45, 54 S Scanner Unit ............................................................. 14, 15 Scanning Glass ............................................................... 45 Scanning Utility ......................................................... 19, 25 Separates documents ..................................................... 35 Separation OFF Mode .................................................... 36 Separation OFF Mode Button ................................... 15, 36 Setup Disc ....................................................................... 13 Software How to Use the Software .......................................... 25 Install .................................................................. 19, 27 Uninstall .................................................................... 28 Specifications .................................................................. 58 T Top Cover ........................................................................ 15 Troubleshooting ............................................................... 38 Turning OFF the Power ................................................... 22 Turning ON the Power ..................................................... 21 U Unpacking the scanner .................................................... 13 USB Connections ...................................................... 20, 38 USB Connector ................................................................ 16 UV scanning .................................................................... 12