Canon scanner imageFORMULA CR190i II User Manual
Here you can view all the pages of manual Canon scanner imageFORMULA CR190i II User Manual. The Canon manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 51
51 Make the following adjustments to maintain scanning quality. Replacing the Ink CartridgeThe ink cartridge needs to be replaced if the printed text becomes scratchy or faint even if you have cleaned the ink jet nozzle. Replace the ink cartridge according to the following procedure below. IMPORTANT The ink disposal tank must be replaced when the ink cartridge is replaced. To replace the ink cartridge, turn the scanner OFF before removing the Top Cover. After the ink cartridge is set, replace the Top...
Page 52
52 DSet the ink cartridge.For more information, see “Setting the Ink Cartridge and Adjusting the Print Position,” on p. 23. ECarefully replace the Top Cover. Replacing the Ink Disposal Tank When the following conditions appear, you have to replace the ink disposal tank according to the following procedure. When the ink cartridge is replaced. When clumpy ink appears on the ink disposal tank as shown below. The replacement ink disposal tank is not included with the scanner. Purchase an ink disposal...
Page 53
53 BRemove the ink disposal tank. WARNING Do not print without the ink disposal tank. Doing so may cause a malfunction. NOTE •Be careful not to get dirty with ink. •When you discard the ink disposal tank, put it in the plastic bag in the box of the ink disposal tank. CAttach the ink disposal tank. DClose the Ink Disposal Tank Pocket. Ink Disposal Tank
Page 54
54 Replacing the Rollers When rollers are worn, paper jams and double feeds tend to occur. You can replace the rollers (Pickup Roller, Feed Roller, and Separation Roller) according to the following procedure. The exchange roller kit is not included with the scanner. Purchase an exchange roller kit separately, as shown below. Compatible exchange roller kit: 4623B001 ARemove the Top Cover. BRemove the Roller Cover. COpen the Feed Supporter to the left. DPinch the Separation Roller at the rim and the...
Page 55
55 NOTE If the Separation Roller is not removed easily because of the fixing lever position, turn the Pickup Roller in anticlockwise direction by hand. EPinch the Feed Roller at the rim and the fixing lever, and then remove it. FPinch the Pickup Roller at the rim and the fixing lever, and then remove it. NOTE If the Pickup Roller is not removed easily because of the fixing lever position, turn the Pickup Roller by hand. GAttach the Pickup Roller. IMPORTANT Push down the roller until it clicks into...
Page 56
56 HAttach the Feed Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. IAttach the Separation Roller with pushing the Separation OFF Mode Button. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. JClose the Feed Supporter to the right. KReplace the Roller Cover.
Page 57
57 LCarefully replace the Top Cover. MAdjust the Adjustment Dial to 5. For more information, see “Adjusting the Separation Roller Gap,” on p. 57. Adjusting the Separation Roller Gap If double feed should occur too often, adjust the Separation Roller gap according to the following procedure. ASlide the Adjustment Dial Cover to the left. BAdjust the Adjustment Dial.Turn the Adjustment Dial to the right 3 clicks. If documents are not fed after the above operation, turn the Adjustment Dial back to the...
Page 58
58 Scanner Specifications Power consumption ■Use the recommended operating environment for the ink cartridge when using the imprinter. ■ You can use the functions noted above if your software supports them. ■ These functions may not work depending on your computer’s capabilities and the software you are using. Specifications are subject to change without notice. Specifications Type Desktop sheet feed Document size Height: 68 to 108 mm (2.7 to 4.3) Length: 120 to 245 mm (4.7 to 9.6) Thickness: 0.08 to...
Page 59
59 Index A Adjusting the Print Position ............................................. 23 Adjustment Dial ......................................................... 15, 57 Adjustment Dial Cover .................................................... 15 Air Vent ........................................................................... 16 Amount loaded ................................................................ 32 B Back Maintenance Cover ................................................ 15 Built-in...
Page 60
60 O Operating Environment ................................................... 18 Operation Buttons ........................................................... 14 P Power Cord ............................................................... 13, 21 Power Cord Connector ................................................... 16 Power Supply .................................................................. 11 Power Switch .................................................................. 14 Print Position...