Canon scanner imageFORMULA CR190i II User Manual

21
Connecting the Power Cord
Connect the power cord.
Make sure to use only the power cord provided with the scanner.
WARNING
When connecting the power cord, follow these precautions. Failure to 
do so may cause a fire or electrical shock.
•Never grasp the power plug when your hands are wet.
•Never plug the scanner into a multiplug power strip.
•Never bundle or tie the power cord around itself or another object. 
Connect the power plug securely into the power outlet.
•Use only the power cord and power...

22
BTurn ON your computer.
CWindows recognizes the CR-135i II/CR-190i II as new 
hardware, and installation starts automatically.
NOTE
The CR-135i II/CR-190i II will be registered as “CANON CR-135i USB” or 
“CANON CR-190i USB” in the Imaging Device directory.
Turning OFF the Power
ATurn OFF your computer.
BTo turn OFF the scanner, press the Power Switch to the “ ” 
position.
CAUTION
•Wait at least 10 seconds before turning the scanner back ON.
•For your safety, disconnect the power plug from the power...

23
This section describes how to prepare the ink cartridge so that you can 
use the imprinter to print text or a bitmap on scanned documents.
About the Ink CartridgeThe ink cartridge is not included with the scanner. Purchase an ink 
cartridge separately, as shown below.
Compatible ink cartridges: 
IMPORTANT
These ink cartridges are available for 5 years after production has stopped.
Setting the Ink Cartridge and Adjusting 
the Print Position
The ink cartridge needs to be set to print. Set the ink...

24
CPlace the ink cartridge shown in the diagram below.
CAUTION
Do not touch the electrical contact on the carriage. Doing so may cause 
a malfunction.
NOTE
Do not use more than one cartridge by rotation. If you do so, applications 
cannot check the ink level precisely.
DPush down the ink cartridge until it clicks into place.
IMPORTANT
Make sure that the ink cartridge is securely in place.
ESqueeze the Print Position Adjustment Lever and move it to 
adjust the print position.
FCarefully replace the Top...

25
Software
This chapter describes how to use the Scanning Utility and the Ranger.
This section describes how to start up the Scanning Utility so that you 
can use the scanner. Read the Help files for the Scanning Utility for 
information on how to use it.
How to Use the Scanning Utility
This section describes the procedure for using the Scanning Utility. 
Read the [Help] file in [Scanning Utility] for more information.
AClick [Start], and then click [All Programs].
BClick [Scanning Utility for...

26
DSelect [Scanner Setting] from the [File] menu.
The Settings dialog box appears.
ESet the scan conditions and click [OK].
NOTE
For information about the settings for the scan conditions, click [Help] on the 
Settings dialog box to open the Help file.
FSelect the scanning method from the [File] menu and start 
scanning.
GWhen scanning is finished, click [Exit] on the [File] menu to 
quit the Scanning Utility. 

27
How to Use the Ranger
About the RangerSilver Bullet Technology’s Ranger Transport API software, allowing it 
to be easily integrated into existing systems or be mixed and matched 
with a wide range of leading check processing software.
Installing the RangerFollow the instructions below to install the Ranger.
ATurn ON your computer, and start Windows.
IMPORTANT
Be sure to log on as the administrator.
BInsert the setup disc into the Disc drive.This manual assumes that “D” is assigned to your Disc...

28
EEnter “D:\Ranger\setup.exe” in the [Open] field, and then click 
[OK].
Installation starts.
FFollow the instructions on the screen to complete the 
installation.
IMPORTANT
The computer may need to be restarted, after the installation, depending on 
the operating system. If this is necessary, make sure to restart the computer.
This section describes how to uninstall the Scanning Utility and the 
Ranger.
IMPORTANT
•Be sure to log on as the Administrator.
•The procedure in Windows XP/Vista/7/8/8.1/10 is...

29
BDouble-click the [Programs and Features] icon.
The [Programs and Features] dialog box appears.
CSelect the software that you want to remove from the list in the 
dialog box, and then click [Uninstall].
NOTE
When the [User Account Control] dialog box appears, click [Continue].
IMPORTANT
•If you uninstall the “Scanning Utility for CR-135i/CR-190i” you also need to 
uninstall the “Canon Driver for CR-135i/CR-190i.”
•If you uninstall the Ranger, select the “Ranger for CR-135i/CR-190i.”
DThe [Confirm File...

30
Document Feeding and Scanning
This chapter describes precautions regarding documents that can be 
handled on this scanner and scanning operations.
This section describes the types of documents that can be used and 
how to place them.
CAUTION
Treat the documents carefully. The paper edges may cut your 
fingers.
DocumentThe CR-135i II/CR-190i II can feed a wide variety of document sizes. 
The ranges of height and length for a document are:
Height : 68 to 108 mm (2.7 to 4.3)
Length : 120 to 245 mm (4.7...