Canon Projector WUX6010 User Manual

181
Product Specifications
Other Information
Product Specifications
HDMI/HDBaseT
Connecting to a computer
Connecting with AV equipment
Component
* The specifications in the table above are subject to change without notice.
* This projector does not support any computer output signal with a dot clock of higher than 162 MHz.
* Use a computer cable in which all pins are connected. If the cable is a type in which all pins are not 
connected, the image may not be correctly displayed.1080PsF
(1920 x...

Product Specifications
182
■Projector
Model name WUX6010
Display system RGB liquid crystal system (LCOS) : 3 panels
Optical systemColor separation by dichroic mirror / polarizing beam splitter 
and color composition by prism
Display device
Type Reflective liquid crystal panel (LCOS) : 3 panels
Size / Aspect ratio 0.71 X3 / 16:10
Drive system Active matrix system
Number dots / Total 
number dots2,304,000 (1920 x 1200) x 3 panels / 6,912,000
Projection lens (*1)
Zoom ratio / Focal length / 
F value1.5x / f...

183
Product Specifications
Other Information
Product Specifications
*1When using a Standard Zoom Lens (RS-IL01ST). Varies depending on the type of lens unit.
*2When lamp mode is set to [Full power].
*3Compliance with ISO21118-2012
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels 
may stay lit or unlit due to the characteristics of the LCD panel. 
* Using the projector continuously for an extended period of time may accelerate the deterioration of 
optical...

Product Specifications
184
■Remote Control
■Specification of Each Lens Unit (Option)
For details about the amount of lens shift, refer to “Lens Shift Function” on page 47.
Type RS-RC04 RS-RC05 (Option)
Power supplyDC 3.0V, using two AAA-size 
batteriesDC 3.0V, using two AA-size batteries
Operating range Approx. 8 m± 25° horizontal and vertical (to infrared remote receiver)
Dimensions43 mm (W) x 23 mm (H) x 
135 mm (D) /
 1.7 (W) x 0.9 (H) x 5.3 (D) in.51 mm (W) x 28 mm (H) x 
176 mm (D) /
 2.0 (W) x 1.1...

185
Product Specifications
Other Information
Product Specifications
For details about the amount of lens shift, refer to “Lens Shift Function” on page 47.
Name Short Fixed Lens Ultra Long Zoom Lens
Model numberRS-IL03WF RS-IL04UL
External View
Focal length12.8 mm (0.5) 53.6 - 105.6 mm (2.1 - 4.2)
F number2.0 2.34 - 2.81
Width97.4 mm (3.8) 97.4 mm (3.8)
Height106.5 mm (4.2) 106.5 mm (4.2)
Length175.2 mm (6.9) 184.2 mm (7.3)
Weight910 g (2.0 lbs) 940 g (2.1 lbs)
Zoom ratio– 1.95x
Projection 
distance0.7 -...

Product Specifications
186
■External View
53 mm (2.1)
128 mm (5.0)
212 mm (8.35)234.5 mm (9.2) 92 mm (3.6)
91 mm (3.6)
150 mm (5.9)
311 mm (12.2)
154.5 mm (6.1)
141.5 mm (5.6)
170 mm (6.7)
430 mm (16.9)
380 mm (15.0)
WUX6010
Bolt holes (M4 x 6) for 
installation of ceiling 
attachment 

187
Product Specifications
Other Information
Product Specifications
■ANALOG PC-2 / COMPONENT Terminal
This terminal is used as a computer ANALOG PC input or COMPONENT input 
terminal. Use a D-sub computer cable.
The terminal specifications for the ANALOG PC input and COMPONENT input are 
the same.
Mini D-sub 15-pin
■Service Port (CONTROL)
Pin assignment
Communication format
Communication mode : RS-232C, asynchronous, half-duplex communication
Communication speed : 19200bps
Character length : 8 bits
Stop...

Product Specifications
188
User commands
Commands ASCII representation Binary representation
Power supplyPower on POWER=ON 50h 4Fh 57h 45h 52h 3Dh 4Fh 4Eh 0Dh
Power off POWER=OFF50h 4Fh 57h 45h 52h 3Dh 4Fh 46h 46h 
0Dh
Power status 
acquisitionGET=POWER47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h 
0Dh
Input sourceHDMI INPUT=HDMI49h 4Eh 50h 55h 54h 3Dh 48h 44h 4Dh 
49h 0Dh
Digital PC INPUT=D-RGB49h 4Eh 50h 55h 54h 3Dh 44h 2Dh 52h 
47h 42h 0Dh
Analog PC-1 INPUT=A-RGB149h 4Eh 50h 55h 54h 3Dh 41h 2Dh 52h 
47h 42h 31h...

189
Product Specifications
Other Information
Product Specifications
BrightnessBrightness 
value settingBRI= 42h 52h 49h 3Dh  0Dh
Brightness 
acquisitionGET=BRI 47h 45h 54h 3Dh 42h 52h 49h 0Dh
SharpnessSharpness 
value settingSHARP=53h 48h 41h 52h 50h 3Dh  0Dh
Sharpness 
acquisitionGET=SHARP47h 45h 54h 3Dh 53h 48h 41h 52h 50h 
0Dh
ContrastContrast value 
settingCONT=43h 4Fh 4Eh 54h 3Dh  
0Dh
Contrast 
acquisitionGET=CONT 47h 45h 54h 3Dh 43h 4Fh 4Eh 54h 0Dh
AspectAuto ASPECT=AUTO41h 53h 50h 45h 43h 54h 3Dh...

190
Troubleshooting
LED Indicator Details
When there is a problem with the projector, the LED indicator on the side of the 
projector illuminates or flashes continuously after the projector is turned off.
• Wait until the cooling fan stops and disconnect the power plug from the electrical outlet before 
dealing with the problem.
LED indicator 
statusMeaning Cause and countermeasure
WARNING and 
TEMP are lit.Temperature 
abnormalityThe temperature inside the projector is too high for 
some reason or the...