Canon Projector SX80 Mark II User Manual
Here you can view all the pages of manual Canon Projector SX80 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81Setting Display Status
Setting Up Functions from Menus
Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the factory default.
Refer to the Users Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-80.png "Page 81
81Setting Display Status
Setting Up Functions from Menus
Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the factory default.
Refer to the Users Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total...")
81Setting Display Status Setting Up Functions from Menus Selecting an Input Signal Type (COMPO- NENT) [Input signal select] You can select a proper component signal type, if a video image from AV equipment is not projected correctly. Press the OK button to accept your setting and then press the MENU button. [Auto] is the factory default. Refer to the Users Manual of your AV equipment connected to the projector to confirm the component signal type. Adjusting Input Signal (ANALOG PC) – Total...
Page 82
![Page 82
Setting Display Status
82
Adjusting Input Signal (ANALOG PC) –
Tracking
[Input signal settings] - [Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P57) cannot adjust the
project image correctly.
You can make adjustment either for
[ANALOG PC-1] or [ANALOG...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-81.png "Page 82
Setting Display Status
82
Adjusting Input Signal (ANALOG PC) –
Tracking
[Input signal settings] - [Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P57) cannot adjust the
project image correctly.
You can make adjustment either for
[ANALOG PC-1] or [ANALOG...")
Setting Display Status 82 Adjusting Input Signal (ANALOG PC) – Tracking [Input signal settings] - [Tracking] You can fine-tune the timing for generating an image from the image signal. Adjusts the tracking when the image dis- torts or flickers. Use [] to select a value. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function (P57) cannot adjust the project image correctly. You can make adjustment either for [ANALOG PC-1] or [ANALOG...
Page 83
![Page 83
83Setting Display Status
Setting Up Functions from Menus
Adjust Input Signal (ANALOG PC) – Vertical
position
[Input signal settings] - [Vertical position]
You can adjust the vertical position of the
screen when the projected image is
shifted in the vertical direction.
Use [] to select a value. As the value
increases, the screen moves upward.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P57) cannot adjust the
project image...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-82.png "Page 83
83Setting Display Status
Setting Up Functions from Menus
Adjust Input Signal (ANALOG PC) – Vertical
position
[Input signal settings] - [Vertical position]
You can adjust the vertical position of the
screen when the projected image is
shifted in the vertical direction.
Use [] to select a value. As the value
increases, the screen moves upward.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P57) cannot adjust the
project image...")
83Setting Display Status Setting Up Functions from Menus Adjust Input Signal (ANALOG PC) – Vertical position [Input signal settings] - [Vertical position] You can adjust the vertical position of the screen when the projected image is shifted in the vertical direction. Use [] to select a value. As the value increases, the screen moves upward. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function (P57) cannot adjust the project image...
Page 84
![Page 84
Setting Display Status
84
Adjust Input Signal (ANALOG PC) – Vertical
pixels
[Input signal settings] - [Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P57) cannot adjust the
project image correctly.
You can make adjustment either for...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-83.png "Page 84
Setting Display Status
84
Adjust Input Signal (ANALOG PC) – Vertical
pixels
[Input signal settings] - [Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P57) cannot adjust the
project image correctly.
You can make adjustment either for...")
Setting Display Status 84 Adjust Input Signal (ANALOG PC) – Vertical pixels [Input signal settings] - [Vertical pixels] You can adjust the number of the pixels in the vertical direction if the length of the screen is too long or too short in the verti- cal direction. Use [] to select a value. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function (P57) cannot adjust the project image correctly. You can make adjustment either for...
Page 85
![Page 85
85Setting Display Status
Setting Up Functions from Menus
Select HDMI Over Scan (SX80 II)
[HDMI over scan]
You can select this as required when you
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting
and then press the MENU button.
[On] is the factory default.
Performing Progressive Processing
[Progressive]
You can select this as required when the
images have low resolution.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-84.png "Page 85
85Setting Display Status
Setting Up Functions from Menus
Select HDMI Over Scan (SX80 II)
[HDMI over scan]
You can select this as required when you
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting
and then press the MENU button.
[On] is the factory default.
Performing Progressive Processing
[Progressive]
You can select this as required when the
images have low resolution.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is...")
85Setting Display Status Setting Up Functions from Menus Select HDMI Over Scan (SX80 II) [HDMI over scan] You can select this as required when you project visual software with the HDMI sig- nals. Press the OK button to accept your setting and then press the MENU button. [On] is the factory default. Performing Progressive Processing [Progressive] You can select this as required when the images have low resolution. Press the OK button to accept your setting and then press the MENU button. [Auto] is...
Page 86
![Page 86
Setting Display Status
86
Selecting a Menu Position
[Menu position]
You can change the position of menu dis-
played.
Move the menu to the desired position with [ ] /
[].
When the menu has been moved to the desired
position, press the OK or MENU button.
Correcting the Screen Color
[Screen color]
You can adjust the color quality of the images
projected corresponding to the color of the pro-
jection screen.
Press the OK button to accept your setting and
then press the MENU button.
[Normal] is the...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-85.png "Page 86
Setting Display Status
86
Selecting a Menu Position
[Menu position]
You can change the position of menu dis-
played.
Move the menu to the desired position with [ ] /
[].
When the menu has been moved to the desired
position, press the OK or MENU button.
Correcting the Screen Color
[Screen color]
You can adjust the color quality of the images
projected corresponding to the color of the pro-
jection screen.
Press the OK button to accept your setting and
then press the MENU button.
[Normal] is the...")
Setting Display Status 86 Selecting a Menu Position [Menu position] You can change the position of menu dis- played. Move the menu to the desired position with [ ] / []. When the menu has been moved to the desired position, press the OK or MENU button. Correcting the Screen Color [Screen color] You can adjust the color quality of the images projected corresponding to the color of the pro- jection screen. Press the OK button to accept your setting and then press the MENU button. [Normal] is the...
Page 87
![Page 87
87Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to
hang the projector from the ceiling or
project an image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
[None] is the factory default. To hung the projector from the ceiling,
use the optional bracket. Contact your
Canon dealer.
The keystone distortion adjustment will
be reset.
HDMICOMPONENT
DIGITAL...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-86.png "Page 87
87Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to
hang the projector from the ceiling or
project an image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
[None] is the factory default. To hung the projector from the ceiling,
use the optional bracket. Contact your
Canon dealer.
The keystone distortion adjustment will
be reset.
HDMICOMPONENT
DIGITAL...")
87Setting Display Status Setting Up Functions from Menus Reversing projection [Image flip H/V] You can make this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Press the OK button to accept your setting and then press the MENU button. [None] is the factory default. To hung the projector from the ceiling, use the optional bracket. Contact your Canon dealer. The keystone distortion adjustment will be reset. HDMICOMPONENT DIGITAL...
Page 88
![Page 88
Setting Display Status
88
Capturing a Logo (SX800)
[User screen settings] - [Logo capture]
You can capture a part of the images
being projected as [User logo].
A screen for capturing images is dis-
played.
For projecting the captured log on a
screen, select [User logo] on the [Pro-
jector on], [No signal screen], [Screen
when blank].
You may not capture an image depend-
ing on the resolution and scan system.
You cannot capture an image when
[16:9] or [16:9 D. image shift] is
selected for...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-87.png "Page 88
Setting Display Status
88
Capturing a Logo (SX800)
[User screen settings] - [Logo capture]
You can capture a part of the images
being projected as [User logo].
A screen for capturing images is dis-
played.
For projecting the captured log on a
screen, select [User logo] on the [Pro-
jector on], [No signal screen], [Screen
when blank].
You may not capture an image depend-
ing on the resolution and scan system.
You cannot capture an image when
[16:9] or [16:9 D. image shift] is
selected for...")
Setting Display Status 88 Capturing a Logo (SX800) [User screen settings] - [Logo capture] You can capture a part of the images being projected as [User logo]. A screen for capturing images is dis- played. For projecting the captured log on a screen, select [User logo] on the [Pro- jector on], [No signal screen], [Screen when blank]. You may not capture an image depend- ing on the resolution and scan system. You cannot capture an image when [16:9] or [16:9 D. image shift] is selected for...
Page 89
![Page 89
89Setting Display Status
Setting Up Functions from Menus
No Signal Screen (SX80 II)
[User screen settings] - [No signal screen]
You can display either of a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
Screen When Blank (SX80 II)
[User screen settings] - [Screen when blank]
You can display a black or blue screen
when the projected image is blanked off
temporarily by pressing the BLANK...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-88.png "Page 89
89Setting Display Status
Setting Up Functions from Menus
No Signal Screen (SX80 II)
[User screen settings] - [No signal screen]
You can display either of a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
Screen When Blank (SX80 II)
[User screen settings] - [Screen when blank]
You can display a black or blue screen
when the projected image is blanked off
temporarily by pressing the BLANK...")
89Setting Display Status Setting Up Functions from Menus No Signal Screen (SX80 II) [User screen settings] - [No signal screen] You can display either of a black or blue screen when there is no input signal. Press the OK button to accept your setting and then press the MENU button. [Blue] is the factory default. Screen When Blank (SX80 II) [User screen settings] - [Screen when blank] You can display a black or blue screen when the projected image is blanked off temporarily by pressing the BLANK...
Page 90
![Page 90
Setting Display Status
90
Selecting a Logo at Startup (SX80 II)
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
No Signal Screen (SX800)
[User screen settings] - [No signal screen]
You can display a user logo on a screen
when there is no input signal.
Press the OK...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-89.png "Page 90
Setting Display Status
90
Selecting a Logo at Startup (SX80 II)
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
No Signal Screen (SX800)
[User screen settings] - [No signal screen]
You can display a user logo on a screen
when there is no input signal.
Press the OK...")
Setting Display Status 90 Selecting a Logo at Startup (SX80 II) [User screen settings] - [Projector on] You can display a specified logo on a screen from the moment the projector is turned on to the moment it is ready fro pro- jection. Press the OK button to accept your setting and then press the MENU button. [Canon logo] is the factory default. No Signal Screen (SX800) [User screen settings] - [No signal screen] You can display a user logo on a screen when there is no input signal. Press the OK...