Canon Projector SX80 Mark II User Manual
Here you can view all the pages of manual Canon Projector SX80 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
131Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-130.png "Page 131
131Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before...")
131Setting Network (SX80 II) Connecting the Projector to Network (SX80 II) 4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate values in the following field, and click the [OK] button. Select one of the following four authentication method in [Mail authentication]. Select [OFF] if the mail authentication is not required (the factory default is [OFF]). [LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)], [USER/PASS (POP before SMTP)], [APOP (POP before...
Page 132
![Page 132
Setting Network (SX80 II)
132
5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-
lowing field, and click the [OK] button.
Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont
want to monitor the projector.
(The factory default: [OFF])
[V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)]
Setting items:
[Receive community]: The name of the community (user)
[Password]: The password for the community setting
[Confirm password]: The password for...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-131.png "Page 132
Setting Network (SX80 II)
132
5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-
lowing field, and click the [OK] button.
Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont
want to monitor the projector.
(The factory default: [OFF])
[V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)]
Setting items:
[Receive community]: The name of the community (user)
[Password]: The password for the community setting
[Confirm password]: The password for...")
Setting Network (SX80 II) 132 5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol- lowing field, and click the [OK] button. Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont want to monitor the projector. (The factory default: [OFF]) [V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)] Setting items: [Receive community]: The name of the community (user) [Password]: The password for the community setting [Confirm password]: The password for...
Page 133
![Page 133
133Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
6Click [Projector info] and enter the projector name.
You can input 1 to 63 alphanumeric characters.
The factory default is [SX80 MarkII].
7Click [Location], enter the projector location, and click the [OK] button.
You can input up to 63 alphanumeric characters.
The factory default is blank.
8Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-132.png "Page 133
133Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
6Click [Projector info] and enter the projector name.
You can input 1 to 63 alphanumeric characters.
The factory default is [SX80 MarkII].
7Click [Location], enter the projector location, and click the [OK] button.
You can input up to 63 alphanumeric characters.
The factory default is blank.
8Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network...")
133Setting Network (SX80 II) Connecting the Projector to Network (SX80 II) 6Click [Projector info] and enter the projector name. You can input 1 to 63 alphanumeric characters. The factory default is [SX80 MarkII]. 7Click [Location], enter the projector location, and click the [OK] button. You can input up to 63 alphanumeric characters. The factory default is blank. 8Click [Apply] when you have completed each menu. Click the [OK] button when the following dialog box is displayed. The network...
Page 134
![Page 134
Setting Network (SX80 II)
134
If you want to test the error report transmission, click [Send test mail].
■Resetting the Network Setting
1Click [Initialize] in the menu screen.
2Click the [OK] button when the following dialog box is displayed.
If you want to restore to the factory setting from the projector, perform [Network set-
ting initialization] from the menu.](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-133.png "Page 134
Setting Network (SX80 II)
134
If you want to test the error report transmission, click [Send test mail].
■Resetting the Network Setting
1Click [Initialize] in the menu screen.
2Click the [OK] button when the following dialog box is displayed.
If you want to restore to the factory setting from the projector, perform [Network set-
ting initialization] from the menu.")
Setting Network (SX80 II) 134 If you want to test the error report transmission, click [Send test mail]. ■Resetting the Network Setting 1Click [Initialize] in the menu screen. 2Click the [OK] button when the following dialog box is displayed. If you want to restore to the factory setting from the projector, perform [Network set- ting initialization] from the menu.
Page 135
135Setting Network (SX80 II) Connecting the Projector to Network (SX80 II) ■Error Notification Message It sends the following message when an error occurs in the projector. Error list * Contact your Canon dealer.Errors related to temperatureError name Temperature abnormality Te x tThe temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated...
Page 136
![Page 136
Setting Network (SX80 II)
136
■Projector Control
1Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]: Turn ON/OFF the projector (P49, P68)
[Input]: Select an input signal (P54)
[Aspect]: Select an aspect ratio (P62)
[Image mode]: Select an image mode (P67)
[Blank]: Blank out the image temporarily (P70)
[Mute]: Mute the sound temporarily (P71)
[Auto setup]: Perform the auto setup function (P52)
[Auto PC]: Perform the auto PC...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-135.png "Page 136
Setting Network (SX80 II)
136
■Projector Control
1Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]: Turn ON/OFF the projector (P49, P68)
[Input]: Select an input signal (P54)
[Aspect]: Select an aspect ratio (P62)
[Image mode]: Select an image mode (P67)
[Blank]: Blank out the image temporarily (P70)
[Mute]: Mute the sound temporarily (P71)
[Auto setup]: Perform the auto setup function (P52)
[Auto PC]: Perform the auto PC...")
Setting Network (SX80 II) 136 ■Projector Control 1Click the [Projector control] button on the network setting screen. The projector control screen appears. Controlled items: [Power]: Turn ON/OFF the projector (P49, P68) [Input]: Select an input signal (P54) [Aspect]: Select an aspect ratio (P62) [Image mode]: Select an image mode (P67) [Blank]: Blank out the image temporarily (P70) [Mute]: Mute the sound temporarily (P71) [Auto setup]: Perform the auto setup function (P52) [Auto PC]: Perform the auto PC...
Page 137
137 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Connecting the Projector to Network (SX80 II) Appendix Index Appendix
Page 138
138 Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red after the projector is turned off when there is a trouble in the projector. Wait until the cooling fan stops and disconnect the power plug from the AC outlet before dealing with the trouble. Flash Pattern Meaning Countermeasure One flash Temperature, abnormalityThe temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the...
Page 139
![Page 139
139Troubleshooting
Appendix
Symptoms and Solutions
■You cannot turn on the projector.
■You cannot project an image from the projector.
Cause Countermeasure
The power cord is not connected
correctly.Check whether the power cord is connected correctly. (P49)
Check that [Key lock] is not enabled. (P105)
The power cord has just been con-
nected.You cannot turn on the projector until the POWER indicator
turns red after connecting the power plug. (P49)
The lamp cover is open.
Unplug the power cord from the...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-138.png "Page 139
139Troubleshooting
Appendix
Symptoms and Solutions
■You cannot turn on the projector.
■You cannot project an image from the projector.
Cause Countermeasure
The power cord is not connected
correctly.Check whether the power cord is connected correctly. (P49)
Check that [Key lock] is not enabled. (P105)
The power cord has just been con-
nected.You cannot turn on the projector until the POWER indicator
turns red after connecting the power plug. (P49)
The lamp cover is open.
Unplug the power cord from the...")
139Troubleshooting Appendix Symptoms and Solutions ■You cannot turn on the projector. ■You cannot project an image from the projector. Cause Countermeasure The power cord is not connected correctly.Check whether the power cord is connected correctly. (P49) Check that [Key lock] is not enabled. (P105) The power cord has just been con- nected.You cannot turn on the projector until the POWER indicator turns red after connecting the power plug. (P49) The lamp cover is open. Unplug the power cord from the...
Page 140
![Page 140
Troubleshooting
140
■A digital camera or USB flash memory is not recognized. (SX80 II)
■You cannot hear sound.
Cause Countermeasure
The external monitor output is not
set on the notebook computer cor-
rectly.Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the [LCD]
or [VGA] function key or a key with an icon for the external
monitor, while holding down the [Fn] key on the keyboard of
the notebook computer. (P51)
The combination of keys...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-139.png "Page 140
Troubleshooting
140
■A digital camera or USB flash memory is not recognized. (SX80 II)
■You cannot hear sound.
Cause Countermeasure
The external monitor output is not
set on the notebook computer cor-
rectly.Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the [LCD]
or [VGA] function key or a key with an icon for the external
monitor, while holding down the [Fn] key on the keyboard of
the notebook computer. (P51)
The combination of keys...")
Troubleshooting 140 ■A digital camera or USB flash memory is not recognized. (SX80 II) ■You cannot hear sound. Cause Countermeasure The external monitor output is not set on the notebook computer cor- rectly.Turn on the external monitor output on the notebook com- puter. To turn on the external monitor output, press the [LCD] or [VGA] function key or a key with an icon for the external monitor, while holding down the [Fn] key on the keyboard of the notebook computer. (P51) The combination of keys...