Canon Projector SX80 Mark II User Manual
Here you can view all the pages of manual Canon Projector SX80 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
121Projecting Data on USB Flash Memory (SX80 II) Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and pro- jecting on the screen. ■Selecting a Drive If a USB flash memory is connected, skip this step. If a USB memory card reader having multiple memory slots is connected, the drive (mem- ory slot) list is displayed in the file list. Select the drive in which the...
Page 122
![Page 122
Projecting Data on USB Flash Memory (SX80 II)
122
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
To return to upper hierarchy, select and press the OK button.
2Press the OK button to project the image in full screen.
To return to the USB file browser, press the OK button.](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-121.png "Page 122
Projecting Data on USB Flash Memory (SX80 II)
122
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
To return to upper hierarchy, select and press the OK button.
2Press the OK button to project the image in full screen.
To return to the USB file browser, press the OK button.")
Projecting Data on USB Flash Memory (SX80 II) 122 ■Selecting an Image File for Projection 1Select an image file with [ ] / [ ]. To return to upper hierarchy, select and press the OK button. 2Press the OK button to project the image in full screen. To return to the USB file browser, press the OK button.
Page 123
![Page 123
123Projecting Data on USB Flash Memory (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
Even if a slideshow is running,...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-122.png "Page 123
123Projecting Data on USB Flash Memory (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
Even if a slideshow is running,...")
123Projecting Data on USB Flash Memory (SX80 II) Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Operating the Projected Image When images are projected, you can perform the following operations. ■Switching to the Previous/Next Image If multiple image files are saved in a folder, you can switch to the previous/next image by pressing [ ] / [ ]. ■Rotating an Image You can rotate the image by 90 degrees to the left or to the right by pressing []. Even if a slideshow is running,...
Page 124
Projecting Data on USB Flash Memory (SX80 II) 124 Running a Slideshow of Data saved in a USB Flash Memory You can run a slideshow that projects multiple images stored in a USB flash memory at certain intervals. ■Creating an Image File Folder In the slideshow, image files in a folder are displayed in the alphabetical order of file name. Therefore, create a folder in the USB flash memory and save the image files to be projected in the slideshow in advance. To start a slideshow, select and project the...
Page 125
125 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Connecting the Projector to Network (SX80 II) Appendix Index Connecting the Projector to Network (SX80 II)
Page 126
126 Setting an IP Address (SX80 II) It is possible to send an error notification e-mail (P135) from the projector to the computer when you connect the projector to the network. To connect via the network, an IP address must be assigned to the projector. Set an IP address by following the steps below. (The examples shown are Windows XP screenshot images.) ■Setting IP Address of the Computer 1Connect the projector and a computer directly via a cross or straight type LAN cable. 2Turn on the power of the...
Page 127
127Setting an IP Address (SX80 II) Connecting the Projector to Network (SX80 II) ■Resetting the IP Address Setting of the Computer 1Turn off the projector and remove the LAN cable. 2Follow the step 3 to 6 to restore the network setting to the original setting.
Page 128
![Page 128
128
Setting Network (SX80 II)
■Displaying the Network Configuration Screen
1Turn on the computer and projector.
2Launch a web browser, enter http://192.168.254.254 in the address bar, and press
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3In the password input screen, enter root for [User name] and system for [Password]
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-127.png "Page 128
128
Setting Network (SX80 II)
■Displaying the Network Configuration Screen
1Turn on the computer and projector.
2Launch a web browser, enter http://192.168.254.254 in the address bar, and press
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3In the password input screen, enter root for [User name] and system for [Password]
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The...")
128 Setting Network (SX80 II) ■Displaying the Network Configuration Screen 1Turn on the computer and projector. 2Launch a web browser, enter http://192.168.254.254 in the address bar, and press the Enter key. The password input screen appears. The supported web browsers is Microsoft Internet Explorer 6 or later. 3In the password input screen, enter root for [User name] and system for [Password] and click the [OK] button. The projector network configuration screen appears on the web browser. The...
Page 129
![Page 129
129Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
■Setting the Network
1In the menu screen, click [Password], input the new user name and password, and
click the [OK] button.
Setting items:
[User name]: The user name for logging in the network
[New password]: The new password
[Confirm new password]: The password for confirmation
2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
Setting items:
[IP address]: The IP address of the...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-128.png "Page 129
129Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
■Setting the Network
1In the menu screen, click [Password], input the new user name and password, and
click the [OK] button.
Setting items:
[User name]: The user name for logging in the network
[New password]: The new password
[Confirm new password]: The password for confirmation
2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
Setting items:
[IP address]: The IP address of the...")
129Setting Network (SX80 II) Connecting the Projector to Network (SX80 II) ■Setting the Network 1In the menu screen, click [Password], input the new user name and password, and click the [OK] button. Setting items: [User name]: The user name for logging in the network [New password]: The new password [Confirm new password]: The password for confirmation 2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button. Setting items: [IP address]: The IP address of the...
Page 130
![Page 130
Setting Network (SX80 II)
130
3Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
Setting items:
[To:]: The E-mail address to which the error report is sent
(Within 63 alphanumeric characters)
[Cc:]: The E-mail address to which the carbon copy of the error
report is sent (Within 63 alphanumeric characters, can be
omitted)
[From:]: The sender of the E-mail (the projector)
[SMTP server IP address]: The IP address of the available SMTP mail...](http://img.usermanuals.tech/thumb/14/99167/w300_projector_manual_5016_d-129.png "Page 130
Setting Network (SX80 II)
130
3Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
Setting items:
[To:]: The E-mail address to which the error report is sent
(Within 63 alphanumeric characters)
[Cc:]: The E-mail address to which the carbon copy of the error
report is sent (Within 63 alphanumeric characters, can be
omitted)
[From:]: The sender of the E-mail (the projector)
[SMTP server IP address]: The IP address of the available SMTP mail...")
Setting Network (SX80 II) 130 3Click [Mail], enter appropriate values in the following field for the error report, and click the [OK] button. Setting items: [To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon copy of the error report is sent (Within 63 alphanumeric characters, can be omitted) [From:]: The sender of the E-mail (the projector) [SMTP server IP address]: The IP address of the available SMTP mail...