Canon Projector SX6000 User Manual
Here you can view all the pages of manual Canon Projector SX6000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
121
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Skip the POWER Button
Operation
[Direct power on]
You can turn on the projector by connect-
ing the power cable without pressing the
POWER button.
MENU > [System settings] > [Direct power on]
MENU > [System settings] > [Direct power on]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
OffYou need to press...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-120.png "Page 121
121
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Skip the POWER Button
Operation
[Direct power on]
You can turn on the projector by connect-
ing the power cable without pressing the
POWER button.
MENU > [System settings] > [Direct power on]
MENU > [System settings] > [Direct power on]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
OffYou need to press...")
121 Setting Various Functions User’s ManualSettin g Functions from Menus Skip the POWER Button Operation [Direct power on] You can turn on the projector by connect- ing the power cable without pressing the POWER button. MENU > [System settings] > [Direct power on] MENU > [System settings] > [Direct power on] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [Off] is the factory default. HDMIComponent Digital PCAnalog PC OffYou need to press...
Page 122
![Page 122
Setting Various Functions
122
Enabling / Disabling the
Beep
[Beep]
You can select whether a beep sounds or
not when you operate the projector.
MENU > [System settings] > [Beep]
MENU > [System settings] > [Beep]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default.
The beep will not sound if you mute the
projector sound with the MUTE button on
the remote control.
Key Repeat
[Key repeat]
By pressing and holding the...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-121.png "Page 122
Setting Various Functions
122
Enabling / Disabling the
Beep
[Beep]
You can select whether a beep sounds or
not when you operate the projector.
MENU > [System settings] > [Beep]
MENU > [System settings] > [Beep]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default.
The beep will not sound if you mute the
projector sound with the MUTE button on
the remote control.
Key Repeat
[Key repeat]
By pressing and holding the...")
Setting Various Functions 122 Enabling / Disabling the Beep [Beep] You can select whether a beep sounds or not when you operate the projector. MENU > [System settings] > [Beep] MENU > [System settings] > [Beep] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [On] is the factory default. The beep will not sound if you mute the projector sound with the MUTE button on the remote control. Key Repeat [Key repeat] By pressing and holding the...
Page 123
![Page 123
123
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Prohibiting Operations
[Key lock]
You can lock the projector to prevent its
operation from either the main unit or
remote control.
MENU > [System settings] > [Key lock]
MENU > [System settings] > [Key lock]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
OffDisables the key lock.
Main
unitOperation is not...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-122.png "Page 123
123
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Prohibiting Operations
[Key lock]
You can lock the projector to prevent its
operation from either the main unit or
remote control.
MENU > [System settings] > [Key lock]
MENU > [System settings] > [Key lock]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
OffDisables the key lock.
Main
unitOperation is not...")
123 Setting Various Functions User’s ManualSettin g Functions from Menus Prohibiting Operations [Key lock] You can lock the projector to prevent its operation from either the main unit or remote control. MENU > [System settings] > [Key lock] MENU > [System settings] > [Key lock] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [Off] is the factory default. HDMIComponent Digital PCAnalog PC OffDisables the key lock. Main unitOperation is not...
Page 124
![Page 124
Setting Various Functions
124
Main Unit and Remote
Control Channel Settings
[Remote control]
When using multiple projectors at the
same time (maximum 4), you can assign a
different channel to each remote control so
that each operates independently.
For the WX6000 / SX6000, set this when
performing infrared operations.
Select the main unit channel.
MENU > [System settings] > [Remote control]
MENU > [System settings] > [Remote control]
Press the OK button to accept your setting
and then press the...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-123.png "Page 124
Setting Various Functions
124
Main Unit and Remote
Control Channel Settings
[Remote control]
When using multiple projectors at the
same time (maximum 4), you can assign a
different channel to each remote control so
that each operates independently.
For the WX6000 / SX6000, set this when
performing infrared operations.
Select the main unit channel.
MENU > [System settings] > [Remote control]
MENU > [System settings] > [Remote control]
Press the OK button to accept your setting
and then press the...")
Setting Various Functions 124 Main Unit and Remote Control Channel Settings [Remote control] When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remote control so that each operates independently. For the WX6000 / SX6000, set this when performing infrared operations. Select the main unit channel. MENU > [System settings] > [Remote control] MENU > [System settings] > [Remote control] Press the OK button to accept your setting and then press the...
Page 125
![Page 125
125
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting a Display Language
[Language]
You can select the language in which the
menus are displayed.
MENU > [System settings] > [Language]
Use the [ ] / [ ] / [ ] / [ ] buttons to
select the menu language, then press the
OK button.
When the setting is completed, press the
OK button to accept your setting and then
press the MENU button or EXIT button
(WX6000 / SX6000).
HDMIComponent
Digital PCAnalog PC
English
German
French...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-124.png "Page 125
125
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting a Display Language
[Language]
You can select the language in which the
menus are displayed.
MENU > [System settings] > [Language]
Use the [ ] / [ ] / [ ] / [ ] buttons to
select the menu language, then press the
OK button.
When the setting is completed, press the
OK button to accept your setting and then
press the MENU button or EXIT button
(WX6000 / SX6000).
HDMIComponent
Digital PCAnalog PC
English
German
French...")
125 Setting Various Functions User’s ManualSettin g Functions from Menus Selecting a Display Language [Language] You can select the language in which the menus are displayed. MENU > [System settings] > [Language] Use the [ ] / [ ] / [ ] / [ ] buttons to select the menu language, then press the OK button. When the setting is completed, press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). HDMIComponent Digital PCAnalog PC English German French...
Page 126
![Page 126
Setting Various Functions
126
Showing / Hiding the
Guide Screen
[Guide]
You can select whether to show or hide the
guide screen which explains operations.
MENU > [System settings] > [Guide]
MENU > [Install settings] > [On screen] >
[Guide]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default.
The guide screen is shown at the following
times.
-Power is turned off by pressing the
POWER button. (P80)-No input signal...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-125.png "Page 126
Setting Various Functions
126
Showing / Hiding the
Guide Screen
[Guide]
You can select whether to show or hide the
guide screen which explains operations.
MENU > [System settings] > [Guide]
MENU > [Install settings] > [On screen] >
[Guide]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default.
The guide screen is shown at the following
times.
-Power is turned off by pressing the
POWER button. (P80)-No input signal...")
Setting Various Functions 126 Showing / Hiding the Guide Screen [Guide] You can select whether to show or hide the guide screen which explains operations. MENU > [System settings] > [Guide] MENU > [Install settings] > [On screen] > [Guide] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [On] is the factory default. The guide screen is shown at the following times. -Power is turned off by pressing the POWER button. (P80)-No input signal...
Page 127
![Page 127
127
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the
Input Status
[Show Input Status]
You can select whether the signal status is
displayed on the screen when there is no
signal or when making signal settings.
MENU > [System settings] > [Show Input Sta-
tus]
MENU > [Install settings] > [On screen] > [Show
input status]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default....](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-126.png "Page 127
127
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the
Input Status
[Show Input Status]
You can select whether the signal status is
displayed on the screen when there is no
signal or when making signal settings.
MENU > [System settings] > [Show Input Sta-
tus]
MENU > [Install settings] > [On screen] > [Show
input status]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default....")
127 Setting Various Functions User’s ManualSettin g Functions from Menus Showing / Hiding the Input Status [Show Input Status] You can select whether the signal status is displayed on the screen when there is no signal or when making signal settings. MENU > [System settings] > [Show Input Sta- tus] MENU > [Install settings] > [On screen] > [Show input status] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [On] is the factory default....
Page 128
![Page 128
Setting Various Functions
128
Setting a Password
[Password settings]
Disables the projector unless the correct
password is entered.
MENU > [System settings] > [Other settings] >
[Password settings]
MENU > [System settings] > [Other settings] >
[Password settings]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-127.png "Page 128
Setting Various Functions
128
Setting a Password
[Password settings]
Disables the projector unless the correct
password is entered.
MENU > [System settings] > [Other settings] >
[Password settings]
MENU > [System settings] > [Other settings] >
[Password settings]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the...")
Setting Various Functions 128 Setting a Password [Password settings] Disables the projector unless the correct password is entered. MENU > [System settings] > [Other settings] > [Password settings] MENU > [System settings] > [Other settings] > [Password settings] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [Off] is the factory default. You cannot set [On] unless you have com- pleted [Register password]. Once you set a password, the...
Page 129
![Page 129
129
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Registering a Password
[Register password]
You can register a password for starting
projection.
MENU > [System settings] > [Other settings] >
[Register password]
MENU > [System settings] > [Other settings] >
[Register password]
Press the OK button after selecting [Reg-
ister password], and the following screen
for registering a password appears.Enter a 4 digit password.
For the WUX5000 / WUX4000, the pass-
word can be entered...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-128.png "Page 129
129
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Registering a Password
[Register password]
You can register a password for starting
projection.
MENU > [System settings] > [Other settings] >
[Register password]
MENU > [System settings] > [Other settings] >
[Register password]
Press the OK button after selecting [Reg-
ister password], and the following screen
for registering a password appears.Enter a 4 digit password.
For the WUX5000 / WUX4000, the pass-
word can be entered...")
129 Setting Various Functions User’s ManualSettin g Functions from Menus Registering a Password [Register password] You can register a password for starting projection. MENU > [System settings] > [Other settings] > [Register password] MENU > [System settings] > [Other settings] > [Register password] Press the OK button after selecting [Reg- ister password], and the following screen for registering a password appears.Enter a 4 digit password. For the WUX5000 / WUX4000, the pass- word can be entered...
Page 130
![Page 130
Setting Various Functions
130
Prohibiting Operation of
the Lens
[Lens Ctrl Lock]
You can lock lens-related button opera-
tions.
MENU > [System settings] > [Other settings] >
[Lens Ctrl Lock]
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
Off Focus, zoom, lens shift, and other
lens-related operations are permit-
ted.
On Focus, zoom, lens shift, and other
lens-related operations are locked.](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-129.png "Page 130
Setting Various Functions
130
Prohibiting Operation of
the Lens
[Lens Ctrl Lock]
You can lock lens-related button opera-
tions.
MENU > [System settings] > [Other settings] >
[Lens Ctrl Lock]
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
Off Focus, zoom, lens shift, and other
lens-related operations are permit-
ted.
On Focus, zoom, lens shift, and other
lens-related operations are locked.")
Setting Various Functions 130 Prohibiting Operation of the Lens [Lens Ctrl Lock] You can lock lens-related button opera- tions. MENU > [System settings] > [Other settings] > [Lens Ctrl Lock] Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. HDMIComponent Digital PCAnalog PC Off Focus, zoom, lens shift, and other lens-related operations are permit- ted. On Focus, zoom, lens shift, and other lens-related operations are locked.