Canon Projector SX6000 User Manual
Here you can view all the pages of manual Canon Projector SX6000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
How to Use Menus
91
User’s ManualSettin
g Functions from Menus
3Use the [] / [] buttons to select an item.
Remote control
ProjectorRemote control](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-90.png "Page 91
How to Use Menus
91
User’s ManualSettin
g Functions from Menus
3Use the [] / [] buttons to select an item.
Remote control
ProjectorRemote control")
How to Use Menus 91 User’s ManualSettin g Functions from Menus 3Use the [] / [] buttons to select an item. Remote control ProjectorRemote control
Page 92
![Page 92
How to Use Menus
92
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect
Adjusting with the [ ] / [ ] buttons Example: Contrast
Selecting from a different screen (1) Example: Menu position
Selecting from a different screen (2) Example: Tracking
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button (WX6000 / SX6000) is
pressed.
1. Select Aspect.
2. Press the OK button or [ ]...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-91.png "Page 92
How to Use Menus
92
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect
Adjusting with the [ ] / [ ] buttons Example: Contrast
Selecting from a different screen (1) Example: Menu position
Selecting from a different screen (2) Example: Tracking
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button (WX6000 / SX6000) is
pressed.
1. Select Aspect.
2. Press the OK button or [ ]...")
How to Use Menus 92 4Select contents. How to select the contents varies depending on the item. Selecting from a list Example: Aspect Adjusting with the [ ] / [ ] buttons Example: Contrast Selecting from a different screen (1) Example: Menu position Selecting from a different screen (2) Example: Tracking 5Pressing the MENU button causes the menu screen to disappear. The menu screen will also disappear if the EXIT button (WX6000 / SX6000) is pressed. 1. Select Aspect. 2. Press the OK button or [ ]...
Page 93
![Page 93
93
User’s ManualSettin
g Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(P69)
MENU > [Display settings] > [Aspect]
MENU > [Input settings] > [Aspect]
Different contents are displayed for differ-
ent screen aspects or input signal types.
ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-92.png "Page 93
93
User’s ManualSettin
g Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(P69)
MENU > [Display settings] > [Aspect]
MENU > [Input settings] > [Aspect]
Different contents are displayed for differ-
ent screen aspects or input signal types.
ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then...")
93 User’s ManualSettin g Functions from Menus Setting Display Status Selecting an Image Pro- jection Mode [Aspect] You can select a projection mode corre- sponding to the aspect ratio of the image. (P69) MENU > [Display settings] > [Aspect] MENU > [Input settings] > [Aspect] Different contents are displayed for differ- ent screen aspects or input signal types. ASPECT button on the remote control can also be used to select the Aspect set- tings. Press the OK button to accept your setting and then...
Page 94
![Page 94
Setting Display Status
94
Automatic Display
Adjustment
[Auto PC]
Automatically adjusts display position mis-
alignment and screen flickering. The
adjusted result is stored in the memory.
MENU > [Input settings] > [Auto PC]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if the
auto PC adjustment function (P62) cannot
project the correct...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-93.png "Page 94
Setting Display Status
94
Automatic Display
Adjustment
[Auto PC]
Automatically adjusts display position mis-
alignment and screen flickering. The
adjusted result is stored in the memory.
MENU > [Input settings] > [Auto PC]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if the
auto PC adjustment function (P62) cannot
project the correct...")
Setting Display Status 94 Automatic Display Adjustment [Auto PC] Automatically adjusts display position mis- alignment and screen flickering. The adjusted result is stored in the memory. MENU > [Input settings] > [Auto PC] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). Selecting an Input Signal Type (Analog PC) [Input signal select] You can select a suitable resolution if the auto PC adjustment function (P62) cannot project the correct...
Page 95
![Page 95
95
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting an Input Signal
Type (Component)
[Input signal select]
You can select the proper component sig-
nal type if the video image from AV equip-
ment is not projected correctly.
MENU > [Display settings]> [Input signal select]
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
Refer to the user’s manual for the AV
equipment connected to the projector to
confirm the...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-94.png "Page 95
95
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting an Input Signal
Type (Component)
[Input signal select]
You can select the proper component sig-
nal type if the video image from AV equip-
ment is not projected correctly.
MENU > [Display settings]> [Input signal select]
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
Refer to the user’s manual for the AV
equipment connected to the projector to
confirm the...")
95 Setting Display Status User’s ManualSettin g Functions from Menus Selecting an Input Signal Type (Component) [Input signal select] You can select the proper component sig- nal type if the video image from AV equip- ment is not projected correctly. MENU > [Display settings]> [Input signal select] Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. Refer to the user’s manual for the AV equipment connected to the projector to confirm the...
Page 96
![Page 96
Setting Display Status
96
Adjust Input Signal Type
(Analog PC) Tracking
[Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
MENU > [Display settings]> [Input signal set-
tings] > [Tracking]
MENU > [Input settings] > [Input signal
settings] > [Tracking]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then press the MENU button
or...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-95.png "Page 96
Setting Display Status
96
Adjust Input Signal Type
(Analog PC) Tracking
[Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
MENU > [Display settings]> [Input signal set-
tings] > [Tracking]
MENU > [Input settings] > [Input signal
settings] > [Tracking]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then press the MENU button
or...")
Setting Display Status 96 Adjust Input Signal Type (Analog PC) Tracking [Tracking] You can fine-tune the timing for generating an image from the image signal. Adjusts the tracking when the image dis- torts or flickers. MENU > [Display settings]> [Input signal set- tings] > [Tracking] MENU > [Input settings] > [Input signal settings] > [Tracking] Use [ ] / [ ] to select a value. When you have completed the adjust- ment, press the OK button to accept your setting and then press the MENU button or...
Page 97
![Page 97
97
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal Type
(Analog PC) Vertical Posi-
tion
[Vertical position]
You can adjust the vertical position of the
screen when the projected image is shifted
in the vertical direction.
MENU > [Display settings]> [Input signal set-
tings] > [Vertical position]
MENU > [Input settings] > [Input signal
settings] > [Vertical position]
Use [ ] / [ ] to select a value. As the
value increases, the screen moves
upward.
When you have...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-96.png "Page 97
97
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal Type
(Analog PC) Vertical Posi-
tion
[Vertical position]
You can adjust the vertical position of the
screen when the projected image is shifted
in the vertical direction.
MENU > [Display settings]> [Input signal set-
tings] > [Vertical position]
MENU > [Input settings] > [Input signal
settings] > [Vertical position]
Use [ ] / [ ] to select a value. As the
value increases, the screen moves
upward.
When you have...")
97 Setting Display Status User’s ManualSettin g Functions from Menus Adjust Input Signal Type (Analog PC) Vertical Posi- tion [Vertical position] You can adjust the vertical position of the screen when the projected image is shifted in the vertical direction. MENU > [Display settings]> [Input signal set- tings] > [Vertical position] MENU > [Input settings] > [Input signal settings] > [Vertical position] Use [ ] / [ ] to select a value. As the value increases, the screen moves upward. When you have...
Page 98
![Page 98
Setting Display Status
98
Adjust Input Signal Type
(Analog PC) Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the screen is too
long or too short in the vertical direction.
MENU > [Display settings] > [Input signal set-
tings] > [Vertical pixels]
MENU > [Input settings] > [Input signal
settings] > [Vertical pixels]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-97.png "Page 98
Setting Display Status
98
Adjust Input Signal Type
(Analog PC) Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the screen is too
long or too short in the vertical direction.
MENU > [Display settings] > [Input signal set-
tings] > [Vertical pixels]
MENU > [Input settings] > [Input signal
settings] > [Vertical pixels]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then...")
Setting Display Status 98 Adjust Input Signal Type (Analog PC) Vertical Pixels [Vertical pixels] You can adjust the number of the pixels in the vertical direction if the screen is too long or too short in the vertical direction. MENU > [Display settings] > [Input signal set- tings] > [Vertical pixels] MENU > [Input settings] > [Input signal settings] > [Vertical pixels] Use [ ] / [ ] to select a value. When you have completed the adjust- ment, press the OK button to accept your setting and then...
Page 99
![Page 99
99
Setting Display Status
User’s ManualSettin
g Functions from Menus
[Expanded], we recommend you to set
[Expanded]. The contrast of images will be
improved and dark scenes will be rendered
more realistically. In this case, select [Auto]
or [Expanded] for the HDMI input level.
For more detailed information, refer to the
user’s manual for the AV equipment con-
nected to the projector.HDMI Color Format
[HDMI color space]
Select the color space for the HDMI signal.
MENU > [Display settings] > [HDMI...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-98.png "Page 99
99
Setting Display Status
User’s ManualSettin
g Functions from Menus
[Expanded], we recommend you to set
[Expanded]. The contrast of images will be
improved and dark scenes will be rendered
more realistically. In this case, select [Auto]
or [Expanded] for the HDMI input level.
For more detailed information, refer to the
user’s manual for the AV equipment con-
nected to the projector.HDMI Color Format
[HDMI color space]
Select the color space for the HDMI signal.
MENU > [Display settings] > [HDMI...")
99 Setting Display Status User’s ManualSettin g Functions from Menus [Expanded], we recommend you to set [Expanded]. The contrast of images will be improved and dark scenes will be rendered more realistically. In this case, select [Auto] or [Expanded] for the HDMI input level. For more detailed information, refer to the user’s manual for the AV equipment con- nected to the projector.HDMI Color Format [HDMI color space] Select the color space for the HDMI signal. MENU > [Display settings] > [HDMI...
Page 100
![Page 100
Setting Display Status
100
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
MENU > [Display settings] > [HDMI over scan]
MENU > [Input settings] > [HDMI over scan]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory defaults settings are [On]
when [HDMI In] (P127) is set for [Auto]
and [Off] when it is set for [Computer].
HDMIComponent
Digital PCAnalog...](http://img.usermanuals.tech/thumb/14/99280/w300_projector_manual_7025_d-99.png "Page 100
Setting Display Status
100
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
MENU > [Display settings] > [HDMI over scan]
MENU > [Input settings] > [HDMI over scan]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory defaults settings are [On]
when [HDMI In] (P127) is set for [Auto]
and [Off] when it is set for [Computer].
HDMIComponent
Digital PCAnalog...")
Setting Display Status 100 Select HDMI Over Scan [HDMI over scan] You can select this as required when you project visual software using an HDMI sig- nal. MENU > [Display settings] > [HDMI over scan] MENU > [Input settings] > [HDMI over scan] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory defaults settings are [On] when [HDMI In] (P127) is set for [Auto] and [Off] when it is set for [Computer]. HDMIComponent Digital PCAnalog...