Canon Projector SX6000 User Manual

Useful Functions Available 
During a Presentation
User’s Manual
Safety Instructions
Before Use Table of Contents
Appendix
Index
Appendix
Installation
Connecting to a NetworkProjecting an Image
Setting Functions from Menus
Maintenance
Installation Manual
81
Useful Functions 
Available During 
a Presentation 

82
Useful Functions Available During a Presentation
Temporarily Blacking Out 
an Image
Press the BLANK button to black out the 
image.
Press the BLANK button again to show the 
image.
 You can set the screen state while black-
ing out the image in the menu. (P106)
 The lamp remains illuminated while the 
image is blacked out.
Freezing the Picture
Press the FREEZE button to freeze the 
moving image. The projector shows the 
following icon.
Press the FREEZE button again to cancel 
the FREEZE function.
 It...

83
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Adjusting the Volume
Press the VOL button. The following 
screen appears.
 You can also adjust the volume level with 
the 
[] / [] buttons of the projector.
 Adjust the volume or mute setting on the 
computer if the volume level is too low.
 You can also adjust the volume level of the 
speakers connected via the audio output 
terminal.
Muting the Sound
Press the MUTE button to mute the sound....

Useful Functions Available During a Presentation
84
Zooming an Image
Press the + D.ZOOM button to enlarge a 
part of the image. Press the - D.ZOOM 
button to reduce the image size.
 The magnification appears on the screen.
You can move the area you want to zoom in 
on by using the 
[] / [] / [] / [] buttons.
You can restore the original size of the 
image by pressing the OK button.
Useful when:
• Zooming in on an object such as a small 
graph during a presentation (up to 12x).
• Focusing on the current...

85
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Showing the Elapsed 
Time
Press the P-TIMER button to start counting.
 The elapsed time is displayed on the lower 
right corner of the screen.
 Time is counted up to 59:59. The timer 
then returns to 00:00.
Press the P-TIMER button again to stop 
the timer.
 Press the P-TIMER button while the timer 
is stopped. The timer disappears from the 
screen. Then press the 
P-TIMER button to 
start...

86 

Projecting an Image Safety Instructions
Before Use Table of Contents
Useful Functions Available 
During a Presentation
Setting Functions from Menus
User’s Manual
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix Installation Manual
87
Setting Func-
tions from Menus 

88
How to Use Menus
Use the menus to set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into 5 tabs as shown below.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the 
menu item is displayed is indicated as follows:Contents of menu
Menu items
[Display settings] tab
You can set the type of signal 
or the method...

How to Use Menus
89
User’s ManualSettin
g Functions from Menus
The menu screen is divided into 6 tabs as shown below.
Contents of menuMenu items
[Input settings] tab
You can set the type of signal or
the method of projection of the
images input.
[Image adjustment] tab
You can adjust the image qual-
ity and colors according to your
preference.
[Network setting] tab

These settings are for when using the
projector from a PC via a network.
For the network settings, refer to page 
165.
[Information] tab
You...

How to Use Menus
90
■Basic Menu Operations
The menus shown below are for WUX5000.
1Press the [MENU] button to display the menu window.
2Use the [] / [] buttons to select a tab.
 If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the 
highlight to the top.
Remote control
ProjectorRemote control
Remote control
ProjectorRemote control