Canon projector REALiS SX7 Maprojector Rk II User Manual

							81
USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION
Zooming an Image
XUseful when:
XZoom in an object such as a small
graph during a presentation.
XMoving unnecessary information off the
screen to focus on the current subject.
Zoom the projected image.
Zooming In an Image
Press this button repeatedly until the image
becomes the desired size.
Moving an Image to the Desired Position
If the image you want to zoom in stays out
of the screen or out of the center of the
screen, you can move it to the desired
position.
Zooming Out an Image
Press this button repeatedly until the image
becomes the desired size.
You can restore the original size of the
image by pressing the [OK] button.
zThe magnification appears on the
screen when you press the [D.ZOOM]
button.
zThe zoom ratio is 1x to 12x.
zYou can freeze the enlarged image.
zPress the [OK] button to cancel the
digital zoom function.
zThe following guiding message
appears if you press an invalid button
during operating the digital zoom
function. 
						

							82
USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION
Operating a Mouse with 
the Remote Control
XUseful when:
XYou want to operate a mouse with the
remote control.
You can use the supplied remote control as
the wireless mouse for your computer.
Connecting a USB Cable
Make sure that both the computer and pro-
jector are turned off, and then connect the
supplied USB cable between the USB ter-
minals on the computer and the projector.
Moving the Cursor
You can move the mouse cursor vertically
and horizontally.
Using the Left Button of the Mouse
You can click, double-click, or drag an
object with this button.
Using the Right Button of the Mouse
USB terminal
USB cableComputer
Projector
USB terminal
zThis function is supported on Windows
7, Windows Vista, Windows XP, or Mac
OS 9.2 and later. 
						

							83
USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION
Pointing with a Spotlight
XUseful when:
XYou want to point to a portion of an
image that should draw attendees
attention.
Highlight a desired portion of the projected
image with a spotlight.
Showing the Spotlight
A spotlight appears at the center of the
screen and the image becomes dark
except for the spotlight.
Press the   button repeatedly to change
the shape of the spotlight.
Moving the Spotlight
Move the spotlight to a desired position.
No mark
zIf you select [16:9 D. image shift] for
[Screen aspect], the SPOT function
will be disabled.
zPress the [OK] button to cancel the
SPOT function. 
						

							Table of contents/Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
SETTING UP 
FUNCTIONS 
FROM MENUS 
						

							86
SETTING UP FUNCTIONS FROM MENUS
Setting Up Functions from Menus
How to Use Menus
Some of the projectors function are used through the menu screen.
It consists of following three menus.
* The menu items may differ depending on the input signal.
The projector stores the settings for each input signal (8) and image mode (up to 5).
Display settings menu (P90)
This menu is used to select an input
signal and make various settings
related to display.
System settings menu (P111)
This menu is used to set various func-
tions of the projector.
You can set them regardless of the
input signal. Image adjustment menu (P102)
This menu is used to make various
adjustments to the projected image.
You can make the adjustments
according to your preference while
checking the image.
Symbols Indicating Item Categories
Menu items are classified into two categories, menu items used to project the image
from the computer and menu items used to project the image from the AV equipment.
Menu item used when projecting an image
from the computer.Menu item used when projecting an
image from AV equipment.
DIGITAL PC input DIGITAL VIDEO input
ANALOG PC-1/ANALOG PC-2 input COMPONENT input
SCART input
COMPONENT input/SCART input
VIDEO input/S-VIDEO inputDIGITAL PCDIGITAL VIDEO
ANALOG PCCOMP.
SCART
COMP./SCART
VIDEO/S-VIDEO 
						

							87
SETTING UP FUNCTIONS FROM MENUS
This section provides the basic operation on the menu.
1Press the [MENU] button.
A menu window appears.
2Press [] to select the appropriate tab.
Press [ ] to move the cursor on the tab if it is 
not on it.
3Press [ ] / [ ] to select a menu item you want to set.
(Continue to the next page.)
zPress the [MENU] button again to close
the menu window.
zSome menu items provide more detailed
menu items.
Display settings 
tabSystem settings 
tab Image adjustment tab (Image adj.)<
Menu items

						

							88
SETTING UP FUNCTIONS FROM MENUS
4Set the menu item.
There are four types of menu items that you make a setting:
zDirectly
zFrom a list
zWith a slider
zIn a different screen
zDirectly
Example: Tracking
Press [] to increase/decrease the
setting.zFrom a list
Example: Aspect
Press the [OK] button to display a list.
Press [ ] [ ] to select a desired setting.
zWith a slider
Example: Contrast
Press [] to move the slider.zIn a different screen
Example: Menu position
Press the [OK] button to display a dif-
ferent screen. Then follow the instruc-
tion on the screen.

						

							89
SETTING UP FUNCTIONS FROM MENUS
5Press the [OK] button.
In some menu items, the setting is enabled just by making a selection.
6Press the [MENU] button when you finish.
The menu disappears. 
						

							90
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (1)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting a Screen Mode (2)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Display settings
Aspect
Projects a computer screen with
aspect ratio of 4:3 fully on the
screen with aspect ratio of 4:3.
Projects a computer screen with
aspect ratio of 4:3 within the screen
with aspect ratio of 16:9.
Projects an input signal image in the
maximum size with the aspect ratio
unchanged.
Projects a computer screen at 16:9
aspect ratio with its width matching
to the width of the projecting area.
Projects a computer screen in its
original size (no enlargement/reduc-
tion).
zEach item may become unavailable
depending on the setting of the input
signal or other menu items.
DIGITAL PCANALOG PC
Full screen
4:3
Auto
Wide
Tr u e  s i z eDisplay settings
Aspect
Switches among [Full screen], [4:3],
and [Wide] automatically in accor-
dance with the video image from the
AV equipment.
Projects a normal image with aspect
ratio of 4:3 on the screen with
aspect ratio of 4:3.
Projects a image with aspect ratio of
4:3 within the screen with aspect
ratio of 16:9.
Projects a video image with aspect
ratio of 16:9.
zEach item may become unavailable
depending on the setting of [Screen
aspect].
DIGITAL VIDEOCOMP.
Auto
Full screen
4:3
Wide