Canon projector REALiS SX7 Maprojector Rk II User Manual

							Table of contents/Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
APPENDIX
Table of contents for Appendix
Supported Computer Signal Types............ P132
Relationship between Screen Size and 
Projecting Distance.................................... P133
Glossary .................................................... P134
Specifications ............................................ P138
Index .......................................................... P140
Menu Configuration ................................... P144 
						

							132
APPENDIX
Appendix
Supported Computer Signal Types
This projector supports following signal types.
If your computer or AV equipment is compatible with any one of these signal types, the pro-
jectors auto PC function select the input signal type to project an image appropriately.
ANALOG PC DIGITAL PC
* Only for SX7 MarkII/SX60
DIGITAL VIDEO
** Interlaced signal
COMPONENT
** Interlaced signal
- The specifications in the table above are sub-
ject to change without prior notice.
- This projector does not support any computer
signal of which dot clock is 170MHz or higher.
- Use a full connected VGA cable in which all
pins are connected; otherwise, an image may
be projected improperly.
Resolution 
(dots)Signal 
typeHorizontal fre-
quency (KHz)Vertical fre-
quency (Hz)
640 x 480 VGA31.469 59.94
31.469 70.09
37.50 75.00
37.861 72.81
37.861 74.38
43.269 85.01
720 x 400 – 31.469 70.09
800 x 600 SVGA34.50 55.38
35.156 56.25
37.879 60.32
37.898 61.03
38.00 60.51
38.60 60.31
46.875 75.00
48.077 72.19
53.674 85.06
1024 x 768 XGA44.028 54.63
46.897 58.19
47.00 58.31
48.363 60.00
48.496 60.02
56.476 70.07
58.032 72.00
60.023 75.03
60.314 74.92
60.994 75.77
62.04 77.07
63.478 79.35
68.677 85.00
1280x768
WXGA47.986 59.83
1280x800
(SX7 MarkII)49.702 60.03
1360x768 – 47.712 60.02
1152 x 864 – 64.196 70.39
1152 x 900 –61.17 65.28
61.846 66.00
71.399 75.64
1280 x 960 – 60.00 60.00
1280 x 1024 SXGA62.50 58.63
63.337 59.98
63.364 59.95
63.735 60.01
63.791 60.18
63.899 60.00
63.981 60.02
71.694 67.19
76.97 72.00
79.976 75.03
81.135 76.11
1400 x 1050 SXGA+ 63.981 60.02
1600 x 1200 UXGA 75.00 60.00
640 x 480 MAC LC 13 34.967 66.60
640 x 480 MAC 13 35.00 66.67
832 x 624 MAC 16 49.725 74.55
1024 x 768 MAC 19 60.248 75.08
1152 x 870 MAC 21 68.681 75.06
1280 x 960 MAC 75.00 75.08
1280 x 1024 MAC 80.00 75.08Resolution 
(dots)Signal 
typeHorizontal fre-
quency (KHz)Vertical fre-
quency (Hz)
640 x 480 D-VGA 31.469 59.94
800 x 600 D-SVGA 37.879 60.32
1024 x 768 D-XGA 48.363 60.00
1280 x 1024 D-SXGA* 63.981 60.02
1400 x 1050 D-SXGA+* 63.981 60.02
Signal 
typeHorizontal frequency 
(KHz)Vertical frequency 
(Hz)
D-480p 31.469 59.94
D-575p 31.250 50.00
D-720p 44.955 59.94
D-1080i** 28.125 50.00
D-1080i** 33.716 59.94
Signal 
typeHorizontal frequency
(KHz)Vertical frequency 
(Hz)
480p 31.469 59.94
480i** 15.734 59.94
575p 31.250 50.00
575i** 15.625 50.00
720p 44.955 59.94
1035i** 33.750 60.00
1080i**28.125 50.00
33.716 59.94 
						

							133
APPENDIX
Relationship between Screen Size and Projecting Distance
Screen size at 4:3 
aspect ratio 
Type – W x D (cm)Projecting distance at (m)
H1 (cm) H2 (cm)Screen size at 16:9 
aspect ratio 
Type – W x D (cm) Max. zooming Min. zooming
40 81 x 611.2 (3.9)2.0 (6.6)55 (1.8)6 (0.2)37 81 x 46
50 102 x 76 1.5 (4.9) 2.5 (8.2) 69 (2.3) 8 (0.26) 46 102 x 57
60 122 x 911.8 (5.9)2.9 (9.6)82 (2.7)9 (0.3)55 122 x 69
70 142 x 107 2.1 (6.9) 3.4 (11.2) 96 (3.1) 11 (0.36) 64 142 x 80
80 163 x 1222.4 (7.9)3.9 (12.9)110 (3.6)12 (0.4)74 163 x 91
90 183 x 137 2.7 (8.9) 4.4 (14.6) 123 (4.0) 14 (0.46) 83 183 x 103
100 203 x 1523.0 (9.8)4.9 (16.1)137 (4.5)15 (0.49)91 203 x 114
110 224 x 168 3.3 (10.8) 5.4 (17.7) 151 (5.0) 17 (0.5) 101 224 x 126
120 244 x 1833.6 (11.8)5.9 (19.4)165 (5.4)18 (0.59)110 244 x 137
130 264 x 198 3.9 (12.8) 6.4 (21) 178 (5.8) 20 (0.66) 119 264 x 149
140 284 x 2134.2 (13.8)6.9 (22.6)192 (6.3)21 (0.69)128 284 x 160
150 305 x 229 4.5 (14.8) 7.4 (24.2) 206 (6.8) 23 (0.75) 138 305 x 171
160 325 x 2444.8 (15.5)7.9 (25.9)219 (7.2)24 (0.79)147 325 x 183
170 345 x 259 5.1 (16.8) 8.4 (27.4) 233 (7.6) 26 (0.85) 156 345 x 194
180 366 x 2745.4 (17.7)8.9 (29.2)247 (8.1)27 (0.86)165 366 x 206
182 370 x 277 5.4 (17.7) 9.0 (29.5) 250 (8.2) 28 (0.9) 167 370 x 208
190 386 x 2905.6 (18.4)–261 (8.6)29 (0.95)174 386 x 217
200 406 x 305 5.9 (19.4) – 274 (9.0) 30 (0.98) 184 406 x 229
210 427 x 3206.2 (20.3)–288 (9.4)32 (1.05)193 427 x 240
220 447 x 335 6.5 (21.3) – 302 (9.9) 34 (1.12) 202 447 x 251
230 467 x 3516.8 (22.3)–315 (10.3)35 (1.15)211 467 x 263
240 488 x 366 7.1 (23.3) – 329 (10.8) 37 (1.21) 220 488 x 274
250 508 x 3817.4 (24.3)–343 (11.3)38 (1.25)233 508 x 286
260 528 x 396 7.7 (25.3) – 357 (11.7) 40 (1.31) 239 528 x 297
270 549 x 4118.0 (26.3)–370 (12.1)41 (1.35)248 549 x 309
280 569 x 427 8.3 (27.2) – 384 (12.6) 43 (1.41) 257 569 x 320
290 589 x 4428.6 (28.2)–398 (13.1)44 (1.44)266 589 x 331
300 610 x 457 8.9 (29.2) – 411 (13.5) 46 (1.51) 276 610 x 343 
						

							134
APPENDIX
Glossary
* is only applicable to SX7 MarkII
6-axis color adjust (P107)
The color adjustment function for an
advanced user. You can adjust color balance
and color level for 6 axis of RGB (red/green/
blue) and CMY (cyan/magenta/yellow) of the
projected image to make a fine color adjust-
ment. You can perform the 6-axis color
adjustment in the image adjustment menu.
AdobeRGB (P55, 102)
A color space specification set up by Adobe
systems Incorporated which is applied to
high performance digital cameras, displays
and others. You can project an image with
more accurate color reproduction since Its
has wider color gamut than sRGB.
In SX7 MarkII, if you select [AdobeRGB] in
the [Image mode] setting, the projector can
project the best-quality image conforming to
the AdobeRGB Standard. Please be aware
that color of the projected image may vary
with that of the original image if you project
an AdobeRGB compatible image in sRGB
mode or project an sRGB compatible image
in AdobeRGB mode.
Ambient light* (P108)
Lightning environment around the projector.
You can correct and project an image more
appropriately according to the ambient light
on the screen via the setting of [Ambient
light] if you have selected [Photo] for [Image
mode].
Analog PC (P27, 36, 93)
A signal system used to send analog signal
information of R (red), G (green), and B
(blue). It is a typical system for connecting a
color monitor to a computer. Connect the
analog PC output terminal on the computer
and Input Terminal-1 or Input Terminal-2 on
this projector with a monitor cable. Select
[ANALOG PC-1] for Input Terminal-1 and
[ANALOG PC-2] for Input Terminal-2 at pro-
jection.
Aspect (P57, 73, 90)
The aspect ratio is the ratio of the horizontal
(longer) dimension to the vertical (shorter)
dimension of a screen. It is expressed as
longer dimension: shorter dimension. The
following aspect ratio is normally used:
[4:3]
The aspect ratio widely accepted in the stan-
dard screen resolution, for example the tradi-
tional television screen and VGA (640 x 480)
and XGA (1024 x 768) in PC. The aspect ratio
for this projector is 4:3.
[5:4]
This aspect ratio is used if you select the res-
olution such as SXGA (1280X1024) in PC.
The shorter dimension in [5:4] is a little longer
than that in [4:3]. An image with aspect ratio
of 5:4 is properly displayed if you select
[Auto] for [Aspect]; however, the margins are
displayed on both sides of the screen.
[16:9]
The aspect ratio for the high definition or
wide-screen. WXGA (1280 x 768 and 1360 x
768) is used as the aspect ratio close to 16:9
for the wide screen monitor in PC. An image
with aspect ratio of 16:9 is properly displayed
if you select [Auto] for [Aspect]; however, the
margins are displayed at the top and bottom
of the screen.
For the aspect ratio for movie screens, vista
vision size and cinema scope size, etc. are
used.
“Vista vision size”
The aspect ratio close to 16:9. Select [Auto]
or [Wide] for [Aspect]. The black belts are
added at the top and bottom of the image.
“Cinema scope size”
The landscape-oriented aspect ratio of 8:3.
Select [Auto] or [Wide] for [Aspect]. The
black belts are added at the top and bottom
of the image. 
						

							135
APPENDIX
Color temperature* (P105)
A value that represents the related color in a
light source in general. In this projector, the
color temperature is used to adjust the RGB
color balance for the projected image to cor-
rect the related color influence by the ambi-
ent light. If you increase and decrease the
color temperature, white changes to blue and
red, respectively. You can set the color tem-
perature in the [Color adjustment] menu if
[Photo] has been selected for [Image mode].
Component (P27, 64, 92)
A signal system in which an image is trans-
mitted by being broken down the brightness
signal (Y) and the color signal (C) into the B-Y
color difference signal and the R-Y color dif-
ference signal. Its image quality is higher
than that of the composite video. This system
can project a better-quality image as com-
pared with the composite signal system.
Connect the component video terminal on
the AV equipment and the ANALOG IN-2 ter-
minal on this projector with a component
cable. Select [COMPONENT] at projection.
Composite (P27, 66)
A video signal system used to send a bright-
ness signal (Y) and a color signal (C)
together. Connect the composite output
(RCA) terminal on the AV equipment and the
VIDEO IN terminal on this projector with a
video cable. Select [VIDEO] at projection.
Digital PC (P27, 37)
A signal system used to send digital informa-
tion of individual display dots. This system is
free from deterioration of image quality
because of no analog conversion. Connect
the DVI output terminal on the computer and
Input Terminal-1 on this projector with a DVI
connection cable. Select [DIGITAL PC] at
projection.
DVI (P37, 48, 65, 70)
A digital video signal connection interface for
a computer and AV equipment. This interface
allows digital data to be transmitted without
converting to analog data, assuring high
image quality with no signal degradation. The
DVI-I (integrated) connector can be used to
transmit both an analog video signal and dig-
ital video signal.
Gain (P105)
A parameter that adjusts the reproduction
range of a brightness signal from black to
white within the image signal to naturally
reproduce it on the screen. The reproducibil-
ity of the bright tone is mainly changed. Since
you can adjust the gain for each RGB color in
this projector, you can also adjust colors. The
gain is normally adjusted with the offset.
Gamma Correction (P104, 106)
A tone adjustment system used during pro-
jection of image data. The gamma correction
function works effectively when portions of an
image are obscure because they are too light
or dark.
This projector supports manual gamma cor-
rection and dynamic gamma correction
which performs the gamma correction auto-
matically.
HDCP
An abbreviation of High-bandwidth Digital
Content Protection which is an encryption
technology for copy protection of digital
image signals. In this projector, you can
project digital contents copy-protected with
the HDCP technology. To project the con-
tents, connect the Input Terminal-1 on the
projector and an HDMI terminal or DVI termi-
nal on an AV equipment with a dedicated
cable, and then select [DIGITAL VIDEO] from
the [INPUT] menu. 
						

							136
APPENDIX
HDMI (P65, 70)
A digital video signal connection interface for
an AV equipment. Its terminal is more com-
pact than the DVI terminal. It allows to trans-
mit video and audio signals simultaneously.
Memorized Color Correction (P107)
A memorized color is a color in our memory.
The memorized color such as blue for the sky
is more vivid than the real color, so you may
feel colors of a projected image are dull. If
such is the case, enable the memorized color
correction function to make the colors close
to the ones in our memory. You can enable
the memorized color correction function in
the image adjustment menu.
Offset (P105)
A parameter that shifts the reproduction
range of a brightness signal from black to
white within an image signal toward the
higher or lower level of brightness. The repro-
ducibility of the dark tone is mainly changed.
Since you can adjust the offset for each RGB
color in this projector, you can also adjust
colors. The offset is normally adjusted with
the gain.
Progressive (P96)
An image display system used to display the
entire screen per scan. For an interlace sig-
nal (video signal) that displays one screen by
two scans (one for odd lines and one for
even lines) is input, progressive processing
is required. When the progressive function is
turned off, one screen is displayed using
image signals per interlace signal, deteriorat-
ing the vertical resolution of the image. When
the progressive function is turned on, one
screen is displayed using image signals per
two interlace signals, improving the vertical
resolution of the image. Turn off the progres-
sive function when flickering and horizontal
lines are noticeable on a fast-moving picture.
Resolution (P44, 91)
The number of dots (horizontal dots x vertical
dots) that can be displayed on a computer is
called “resolution of display”. Resolution indi-
cates the size of the display area (amount of
information).
If you select SXGA+ (1400 dots x 1050 dots)
as the display resolution for the connecting
computer, this projector can project high-res-
olution images. If your computer does not
have the SXGA+ option, select the maximum
resolution among the selectable options.
sRGB (P55, 102)
An international standard of color representa-
tion (color space) which is applied to general
digital cameras, displays and others. In this
projector, if you select [sRGB] in the [Image
mode] setting, the projector can project the
best-quality image conforming to the sRGB
Standard.
Resolu-
tionNumber of dots
Hori-
zontalVe r ti ca l
VGA 640 480
SVGA 800 600
XGA 1024 768
SXGA 1280 1024
SXGA+ 1400 1050
UXGA 1600 1200
Number of pixels in each 
resolution 
						

							137
APPENDIX
S-video (P27, 66, 92)
A signal system (YC separation signal) used
to send a brightness signal (Y) and color sig-
nal (C) separately. Connect the S-video ter-
minal on the AV equipment and the S-VIDEO
IN terminal on this projector with an S-video
cable. Select [S-VIDEO] at projection.
Tracking (P93)
To reproduce an image from an analog
image signal, the process to accumulate
image information at the appropriate timing
with reference to the synchronization signal
within the image signal. This process is
called the tracking. This projector can dis-
play an image properly by automatically
adjust the tracking with the auto PC adjust-
ment function even if there is a small differ-
ence in the synchronization signal from an
analog imaging device.
Video (P27, 66, 92)
An output terminal widely used in an AV
equipment. It is also called as a composite
output terminal (pin terminal or RCA termi-
nal). For more details, refer to Composite. 
						

							138
APPENDIX
Specifications
Projector
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the charac-
teristics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
Remote Control
Model name SX7 MarkII/SX60
Display system RGB liquid crystal system
Optical system Color separation by dichroic mirror/polarizing beam splitter and color composition by prism
Display
device
Type Reflective liquid crystal panel
Size/Aspect rat 0.7 x 3 panels/4 : 3
Drive system active matrix system
Number of pixels/
Total Number of pixelsSX7 MarkII/SX60: 1,470,000 (1400 x 1050) x 3 panels/4,410,000
Projection
lens
Zoom ratio/Focal length/F value 1.7x/f=21.7 to 35.8 mm/F1.85 to F2.5
Zooming and focusing system Electronic operation/electronic operation (with auto focusing function)
Lens shift 9 : 1 (fixed)
Light source SX7 MarkII: 275W high-pressure lamp, SX60: 180W high-pressure lamp
Screen size (projection distance) 40 to 300 (1.2 to 9 m)
Number of reproducible colors 16,770,000 colors (full color)
Brightness SX7 MarkII: 4000 lm, SX60: 2500 lm
Contrast ratio 1000:1 (full white : full black)/2000:1 (SX60 in Home Cinema mode)
Uniformity 88%
Speaker 1W monaural x 1
Maximum input resolution 1600 x 1200 dots (compression)
Video signals
ANALOG PC inputUXGA/SXGA+/WXGA/SXGA/XGA/SVGA/VGA
(scan rate: horizontal: 15 to 100KHz, vertical 50 to 100Hz)
DIGITAL PC input SX7 MarkII/SX60: SXGA+/SXGA/XGA/SVGA/VGA
COMPONENT input 1080i, 1035i, 720p, 575i, 575p, 480i, 480p
RGB SCART input 575i
DIGITAL VIDED input 1080i, 720p, 575p, 480p
VIDEO/S-VIDEO input NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
Input terminals
Input Terminal-1 Digital PC, analog PC, digital video (DVI-I connector 29-pin)
Input Terminal-2 Analog PC, component, SCART (mini D-sub 15-pin)
VIDEO IN terminal composite (RCA)
S-VIDEO IN terminal S-Video (mini DIN 4-pin)
AUDIO IN terminal Audio signal (SX7 MarkII: stereo mini jack x 3, SX60: stereo mini jack x 1)
USB terminal For mouse control (USB type B)
SERVICE PORT RS-232C (mini DIN 8-pin)
Video Output terminal Analog PC (mini D-sub 15-pin)
Audio Output terminal Audio signal (SX7 MarkII: stereo mini jack)
Input signals
Digital PC TMDS (Transition Minimized Differential Signaling)
Analog PC0.7Vp-p, positive polarity, impedance = 75Ω
Horizontal/vertical synchronization: TTL level, negative or positive polarity
Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω
VideoVideo:1Vp-p, negative synchronization, impedance = 75Ω
S-video: Separate YC signal, Y: 1Vp-p, negative synchronization, impedance = 75Ω
C: 0.286Vp-p (burst signal), impedance = 75Ω
Component: Separate Y Cb/Pb Cr/Pr signal
Y: 1Vp-p, Negative synchronization, impedance = 75Ω
Cb/Pb: 0.7Vp-p, impedance = 75Ω       Cr/Pr: 0.7Vp-p, impedance = 75Ω
Audio 142mVrms, impedance = 47 KΩ or more
Noise (Lamp mode: Normal/Quiet) SX7 MarkII: 35/31 db, SX60: 30/27 db
Operating temperature 5 °C to 35 °C
Power supply AC 100 – 240 V, 50/60 Hz
Power consumption (Lamp mode: 
Normal/Quiet, standby state)SX7 MarkII: 360W/290W, 7W, SX60: 250W/225W, 7W
Dimensions 266 (W) x 114 (H) x 336 (D) mm / 10.6 (W) x 4.6 (H) x 13.4 (D) in (excluding protrusions)
Weight SX7 MarkII: 4.8 kg/10.6 lbs, SX60: 4.6 kg/10.1 lbs
AccessoriesRemote control, batteries for remote control, power cord, computer connection cable, USB 
cable, component cable, carrying bag, lens cover, string for lens cover, Users Manual and 
Warranty Card.
Power supply Two 3.0 V, AAA-size batteries
Operating range About 5 m (16.4) (to infrared remote receiver)
Dimensions 42 (W) x 22 (H) x 135 (D) mm / 1.7 (W) x 0.9 (H) x 5.3 (D) in
Weight (not including batteries) 55 g 
						

							139
APPENDIX
External View
Input terminal-2 (ANALOG IN-2) (Analog PC-2 input/component input terminal)
This terminal is used as a computer analog PC input or component input terminal. Use a D-
sub computer cable for connection.
Mini D-sub 15-pin
1R 9+5 V power
2 G 10 Ground (Vertical sync.)
3 B 11 Monitor ID0
4 Monitor ID2 12 DDC data
5 Ground (Horizontal sync.) 13 Horizontal sync.
6 Ground (R) 14 Vertical sync.
7 Ground (G) 15 DDC clock
8 Ground (B)
zThe terminal specifications for the analog PC-2 input and component input are the same.
Screw Holes for 
installation of ceiling-
mount hanger 
(M4 x 6) 
						

							140
INDEX
Index
Numerics
6-axis color adjust  ........................ 107, 134
A
Adjusting keystone distortion  ................. 52
AdobeRGB  ............................. 56, 102, 134
Air filter  ................................................. 121
Ambient light (SX7 MarkII)  ................... 108
ANALOG IN-1  .................................. 26, 36
ANALOG IN-2  ............................ 26, 36, 64
Analog PC  ................................ 36, 48, 134
Aspect  ................................ 57, 73, 90, 134
AUDIO IN terminal (SX60) ...................... 39
AUDIO IN terminal 
(SX7 MarkII)  .................................. 38, 67
AUDIO OUT terminal 
(SX7 MarkII)  ........................................ 68
Auto focus  ...................................... 46, 111
Auto input  ....................................... 46, 111
Auto keystone  ................................ 46, 111
AUTO PC ................................................ 54
Auto screen color  ........................... 46, 111
AUTO SET  ........................................ 47, 70
Auto setup  ................................ 46, 70, 111
B
Beep ..................................................... 112
Brightness ............................................ 103
C
Carrying bag  .................................... 14, 21
Ceiling mounted  ............................... 33, 97
Channel setting  .................................... 115
Color adjustment  .................................. 105
Color temperature (SX7 MarkII)  ........... 105
Component .................................... 64, 135
Composite ............................................ 135
Contrast ................................................ 103
D
D.ZOOM ................................................. 81
DIGITAL IN  ....................................... 26, 65
DIGITAL PC ...................................... 37, 48
Digital PC  ............................................. 135
Digital video  ......................................... 116
Direct power on .................................... 112
Display settings menu ...................... 86, 90
Displaying a logo (SX60)  ............... 99, 100DVI  ........................................... 37, 65, 135
Dynamic gamma  .................................. 106
E
External monitor  ..................................... 38
F
Factory defaults  ........................... 110, 117
FOCUS ................................................... 51
Focusing ................................................ 51
FREEZE .................................................. 78
G
Gain .............................................. 105, 135
Gamma correction  ....................... 104, 135
Guide ................................................... 114
H
HDCP ................................................... 135
HDMI .............................................. 65, 136
Horizontal pixels ..................................... 95
Horizontal position  ................................. 94
I
IMAGE .................................................... 55
Image adjustment menu  ................ 86, 102
Image flip H/V (Ceiling mounted/Rear)  .. 97
Image mode  ......................................... 102
Image mode (quality)  ..................... 55, 102
INPUT ............................................... 48, 71
Input signal select (AV equipment) ........ 70
Input signal select (computer)  ............... 48
Input signal select 
(Display settings menu)  ...................... 91
Input terminal  ......................................... 26
Input terminal (for AV equipment)  .......... 64
Input terminal (for computer)  ................. 36
K
Key lock  ............................................... 114
KEYSTONE ............................................. 52
L
Lamp counter  ....................................... 118
Lamp mode  .......................................... 109
Lamp replacement  ............... 118, 122, 123
LED illumination  ................................... 115
Lens cap  ................................................ 21
Logo capture (SX60)  .............................. 98
Logo position (SX60) .............................. 99