Home > Canon > Projector > Canon projector REALiS SX6000 Pprojector Ro AV User Manual

Canon projector REALiS SX6000 Pprojector Ro AV User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon projector REALiS SX6000 Pprojector Ro AV User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							231
    Option
    • Installing / Removing the Lens Unit
    It is possible to use replace the lens unit. Regarding installation and replacement of the lens unit, con-
    tact a qualified technician or the Canon Customer  Support Center for further information. Do not
    attempt installation and replacement of the lens unit yourself.
    • Precaution for qualified technicians
    Before installation and replacement the lens unit,  check the part number and use the correct lens unit.
    •Lamp
    Part No.: RS-LP06 (WUX4000) RS-LP07 (WUX5000 / WX6000 / 
    SX6000) • Air filter
    Part No.: RS-FL01
    • Standard Zoom Lens  Part No.: RS-IL01ST
    • Ceiling attachment
    Part No.: RS-CL11 • Long Zoom Lens 
    Part No.: RS-IL02LZ
    • Ceiling-mount pipe (400 - 600 mm)
    Part No.: RS-CL08* • Short Fixed Lens 
    Part No.: RS-IL03WF
    • Ceiling-mount pipe (600 - 1000 mm)
    Part No.: RS-CL09* • Ultra Long Zoom Lens
    Part No.: RS-IL04UL
    • Black top panel Part No.: RS-TC01 • Remote control
    Part No.: RS-RC04 (WUX5000 / WUX4000) RS-RC05 (WX6000 / SX6000)
    * Use the above materials to hang the projector from  the ceiling. For details, refer to the assembly and
    installation manual provided with the ceiling attachment RS-CL11. 
    						
    							232
    Menu Configuration 
    Display settings Menu
    AspectDigital PC / Analog PCP93Auto *
    Full
    16
    :9
    4:3
    Tr u e  s i z e
    HDMIAuto *
    Full
    16
    :9
    4:3
    Zoom
    Tr u e  s i z e
    ComponentAuto *
    16:9
    4:3
    Zoom
    Tr u e  s i z e
    Input signal 
    selectAnalog PCP94
    640x480
           :
    1920x1200
    ComponentP95Auto *
    1080p
    1080i
    1035i
    720p
    576p
    480p
    576i
    480i
    Input signal
    settingsAnalog PC
    Total dotsP95
    TrackingP96
    Horizontal positionP96
    Vertical positionP97
    Horizontal pixelsP97
    Vertical pixelsP98
    HDMI input levelHDMIP98
    Auto *
    Normal
    Expanded
    HDMI color spaceHDMIP99Auto *
    RGB
    YCbCr
    HDMI over scan *1HDMIP100
    Off
    On
    ProgressiveComponent / HDMIP101Off
    On
    Auto *
    Menu positionP102
    Screen color Normal *P103Greenboard
    AdjustRed / 
    Green / Blue
    Image flip H/V None *P104Ceiling mounted
    Rear
    Rear, Ceiling mounted
    User screen 
    settings
    No signal screen BlackP105Blue*
    Screen when blank Black *P106Blue
    Projector on SkipP106Canon logo*Return
    Screen aspect 16:10*P10716:9
    4:3
    16:9 D. image shift
    4:3 D. image shift 
    						
    							233
    Menu Configuration
    Image Adjustment Menu
    Factory default settings for *1, *2 and *3 are set accord-
    ing to the following conditions.
    
    In] is [Computer]), the factory default is [Off].
    
    [Auto]), the factory default is [On].
    
    default is [Off].
    
    
    tal PC or Analog PC, if any image mode is used
    except [VividPhoto], the factory default is [Off].
    If [VividPhoto] is used, the factory default is
    [Middle].
    
    nent, the factory default is [Weak], regardless of
    the image mode. 
    
    Image modeCOMMONP109Standard *
    Photo/sRGB
    User 1 - 5 (as creating 
    profile)
    Digital PC / Analog PC / 
    HDMI (when [HDMI In] 
    is [Computer])P109
    Presentation
    VividPhoto
    Component / HDMI 
    (when [HDMI In] is [Auto])P109
    Dynamic
    Video
    Cinema
    Create ProfileP110Baseline Image 
    Mode (when user 
    memory is selected)P110
    BrightnessP111ContrastP112SharpnessP113GammaP113
    Color adjustmentP114
    Color levelColor balanceColor temperatureR GainG GainB GainR OffsetG OffsetB Offset
    Advanced adjustment
    Ambient light Off *P115Adjust
    Type TungstenFluorescent
    Fluores-
    cent H
    Level L
    M
    H
    Return
    Noise reduction *2Component / HDMIP116Off
    Weak
    Middle
    Strong
    Dynamic gamma Off *1P116Weak *2
    Middle
    Strong
    Mem. color correct *3OffP117L
    M
    H
    6-axis color adjust Off *P117
    AdjustHue / Saturation / 
    Brightness
    Reset
    Fine-Tune GammaP118
    Return
    Lamp mode *4 Normal *P119Quiet
    Reset OK / CancelP119 
    						
    							Menu Configuration
    234
    System Settings MenuNetwork Setting Menu
    Information Menu
    * : Factory defaults (setting after reset)
    Power management 
    modeOff *P120
    Standby
    Exit
    Direct power on Off *P121On
    Beep OffP122On *
    Key lock Off *P123Main unit
    Remote control
    Remote control Ch1P124Ch2
    Ch3
    Ch4
    Independent *
    LanguageEnglish TurkishP125German Polish
    French Hungarian
    Italian Czech
    Spanish Danish
    Portuguese Arabic
    SwedishChinese 
    (Simplified)
    RussianChinese 
    (Traditional)
    Dutch Korean
    Finnish Japanese
    Norwegian
    Guide OffP126
    On *
    Show Input Status OffP127On *
    HDMI InAuto *P127Computer
    Other settings
    Password settings Off *P128On
    Register password Password inputP129
    Lens Ctrl Lock Off *P130On
    Lens shift Reset Lens shift ResetP131
    Menu display time Normal *P132Extended
    Overheat Warning Dis-
    playOff *P133
    On
    Deflicker Off *P134Adjust
    Lamp counter ReturnP135Reset (OK / Cancel)
    Factory defaults OK / CancelP140
    Return
    Network setting lock UnlockP171Lock *
    Network function Off *P172On
    Network Password setting OffP173On *
    Register Network Pass-
    wordPassword inputP173
    PJLink OffP174On *
    DHCP Off *P175On
    TCP/IP setting IP addressP175Subnet mask
    Gateway address
    Enter
    Network setting initializa-
    tionYe s  /  N oP176
    Model nameP141Input signalFirmwareSerial No.IP addressGateway addressE-mail sender addressE-mail recipient addressProjector nameLocationSystem information ID 
    						
    							235
    Menu Configuration
    Input Settings Menu
    AspectDigital PC / Analog PC-1 / 2 /
    HDMI (when [HDMI In] is
    [PC])P93
    Auto *
    16:10
    16:9
    4:3
    Tr u e  s i z e
    HDMI (when [HDMI In] is
    [Auto]) /Component
    Auto *
    16:10
    16:9
    4:3
    Zoom
    Tr u e  s i z e
    Auto PC
    P94
    Input signal 
    selectAnalog PC-1 / 2P94
    640 x 480
           :
    1920 x1200
    Input signal set-
    tingsAnalog PC-1 / 2
    Total dotsP95
    TrackingP96
    Horizontal positionP96
    Vertical positionP97
    Horizontal pixelsP97
    Vertical pixelsP98
    HDMI input levelHDMIP98Auto *
    Normal
    Expanded
    HDMI color 
    spaceHDMIP99
    Auto *
    RGB
    YCbCr
    HDMI over 
    scan*1HDMIP100
    Off
    On
    ProgressiveComponent / HDMIP101
    Off
    On
    Auto * 
    						
    							Menu Configuration
    236
    Image Adjustment Menu
    Image modeCOMMONP109
    Standard *
    Photo/sRGB
    User 1 - 5 (when creating 
    profile)
    Digital PC / 
    Analog PC-1/2 / 
    HDMI (when [HDMI In] is 
    [Computer]) P109
    Presentation
    VividPhoto
    Component / HDMI (when 
    [HDMI In] is [Auto]) P109
    Dynamic
    Video
    Cinema
    Create Profile P110Save profile
    (When profile is 
    selected)P110
    Baseline Image 
    Mode (When pro-
    file is selected)P111
    Brightness
    P111ContrastP112SharpnessP113GammaP113
    Color adjustmentP114
    Color levelColor balanceColor temperatureR GainG GainB GainR OffsetG OffsetB Offset
    Advanced adjustment
    Ambient light Off *P115Adjust
    Type TungstenFluorescent
    Fluorescent 
    H
    Level L
    M
    H
    Return
    Noise reduction *2Component / HDMIP116Off
    Weak
    Middle
    Strong
    Dynamic gamma Off *1P116Weak *2
    Middle
    Strong
    Mem. color correct *3OffP117L
    M
    H
    6-axis color adjust Off *P117
    AdjustHue / Saturation / 
    Brightness
    Reset
    Fine-Tune GammaP118
    Return
    Reset OK / CancelP119 
    						
    							237
    Menu Configuration
    Install settings Menu
    *1 - *5: Factory default settings are set according to the 
    following conditions.
    
    [HDMI In] is [Computer]), the factory default is
    [Off].
    
    [Auto]), the factory default is [On].
    
    default is [Off].
    
    
    tal PC or Analog PC-1/2, if any image mode is
    used except [VividPhoto], the factory default is
    [Off]. If [VividPhoto] is used, the factory default
    is [Middle].
    
    nent, the factory default is [Weak], regardless of
    the image mode.
    
    
    Positional lock Off *P139
    On
    Test pattern Off *P138
    On
    Screen aspect 16:10 *5P107
    16:9
    4:3 *4
    16:10 D. image shift 
    (SX6000)
    16: 9 D. image shift
    4:3 D. image shift 
    (WX6000)
    Keystone adjustmentKeystone adjustmentP108
    Digital image shift D. image shift adjustmentP108
    Image flip H/V  None*P104
    Ceiling mounted
    Rear
    Rear, Ceiling mounted
    Lens shift reset Lens shift resetP131
    Audio in terminal select
    HDMI OffP139
    Audio in 1
    Audio in 2
    HDMI *
    Digital PC OffP139
    Audio in 1
    Audio in 2 *
    Analog PC-1 OffP139
    Audio in 1 *
    Audio in 2 
    Analog PC-2 OffP139
    Audio in 1
    Audio in 2 *
    Component OffP139
    Audio in 1 *
    Audio in 2
    Screen color Normal *P103
    Greenboard
    Adjust
    On screen
    Menu positionP102
    Guide OffP126
    On *
    Show input status OffP127
    On *
    Overheat warning displayOff *P133
    On
    Menu display time Normal *P132
    Extended
    Lamp warning display OffP135
    On *
    Filter warning display OffP137
    On * 
    						
    							Menu Configuration
    238
    System Settings MenuNetwork Setting Menu
    Information Menu
    * : Factory defaults (setting after reset)
    Power management modeOff *P120
    Standby
    Exit
    Direct power on Off * P121
    On
    User screen settings
    No signal screen Black P105
    Blue *
    Screen when blank Black * P106
    Blue
    Projector on Skip P106
    Canon logo *
    Beep Off  P122
    On *
    Key Repeat Off  P122
    On *
    Key lock Off * P123
    Main unit
    Remote (wireless)
    Remote control Ch1 P124
    Ch2
    Ch3
    Ch4
    Independent*
    HDMI In Auto * P127
    Computer
    LanguageEnglish TurkishP125German Polish
    French Hungarian
    Italian Czech
    Spanish Danish
    Portuguese Arabic
    Swedish Chinese 
    (Simplified)
    Russian Chinese 
    (Traditional)
    Dutch Korean
    Finnish Japanese
    Norwegian
    Other settings
    Password settings Off * P128
    On
    Register password Password input P129
    Gamma restore OffP134
    Adjust
    Lamp counter ReturnP135Reset (OK / Cancel)
    Filter counter ReturnP137Reset (OK / Cancel)
    Factory defaults OK /  Cancel P140
    Return
    Network setting lock UnlockP171Lock *
    Network functionOff *P172On
    Network Password setting OffP173On *
    Register Network Pass-
    wordPassword inputP173
    PJLink
    OffP174On *
    DHCPOff *P175On
    TCP/IP settingIP addressP175Subnet mask
    Gateway address
    Enter
    Network setting initializa-
    tion Ye s  /  N oP176
    Model name
    P141Input signalFirmwareSerial No.IP addressGateway addressE-mail sender addressE-mail recipient addressProjector nameLocationSystem information ID 
    						
    							239
    Menu Configuration 
    						
    							©CANON INC.2011 CANON INC.
    30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 
    146-8501, Japan
    U.S.A.
    CANON U.S.A. INC.
    One Canon Plaza, Lake Success, NY 11042-
    1198, U.S.A.
    For all inquires concerning this product, call toll 
    free in the U.S. 1-800-OK-CANON
    CANADA
    CANON CANADA INC. HEADQUARTERS
    6390 Dixie Road, Mississauga, Ontario L5T 
    1P7, Canada
    CANON CANADA INC. MONTREAL BRANCH
    5990, Côte-de-Liesse, Montréal Québec H4T 
    1V7, Canada
    CANON CANADA INC. CALGARY OFFICE
    2828, 16th Street, N.E. Calgary, Alberta T2E 
    7K7, Canada
    For all inquiries concerning this product, call toll 
    free in Canada
    1-800-OK-CANON
    EUROPE, AFRICA & MIDDLE EAST
    CANON EUROPE LTD.
    3 The Square Stockley Park, Uxbridge, Middle-
    sex, UB11 1ET United Kingdom
    CANON EUROPA N.V.
    Bovenkerkerweg 59-61, 1185 XB Amstelveen, 
    The Netherlands
    CANON FRANCE S.A.S
    17, quai du President Paul Doumer, 92414 
    Courbevoie Cedex, France
    CANON UK LTD.
    Woodhatch Reigate Surrey RH2 8BF, United 
    Kingdom
    CANON DEUTSCHLAND GmbH
    Europark Fichtenhain A10, 47807 Krefeld, Ger-
    many
    CANON ITALIA S.p.A.
    Via Milano 8 I-20097 San Donato Milanese, Mil-
    ano, Italy
    CANON Schweiz AG
    Geschäftsbereich Wiederverkauf, Industri-
    estrasse 12, CH-8305 Dietlikon,
    Switzerland
    CANON GMBH
    Zetschegasse 11, A-1230 Wien, Austria
    CANON España, S.A.
    Av. De Europa, 6 Alcobendas 28108 Madrid, 
    SpainCANON PORTUGAL S.A.
    Rua Alfredo da Silva, 14 Alfragide 2610-016 
    Amadora, Portugal
    CANON Belgium N.V. / S.A.
    Berkenlaan 3, 1831 Diegem (Mechelen), Bel-
    gium
    CANON Netherland NV
    Neptunusstraat 1, 2132 JA Hoofddorp, The 
    Netherlands
    CANON LUXEMBOURG S.A.
    Rue des Joncs 21, L-1818 Howald, Luxem-
    bourg
    CANON DANMARK A / S
    Knud Hoejgaards Vej 1 DK-2860 Soeborg, Dan-
    mark
    CANON OY
    Huopalahdentie 24 PL 1 00351 Helsinki, Fin-
    land
    CANON SVENSKA AB
    Gustav III:s Boulevard 26 169 88 Solna, Swe-
    den
    CANON NORGE as
    Hallagerbakken 110, Postboks 33, Holmlia, 
    1201 Oslo, Norway
    CENTRAL & SOUTH AMERICA
    CANON LATIN AMERICA, INC.
    703 Waterford Way, Ste. 400 Miami, FL 33126, 
    U.S.A.
    ASIA
    CANON (China) Co., Ltd.
    15F Jinbao Building No.89 Jinbao Street, 
    Dongcheng District, Beijing 100005, China
    CANON HONGKONG CO., LTD.
    19 / F., The Metropolis Tower, 10 Metropolis 
    Drive, Hunghom, Kowloon, Hong Kong
    CANON SINGAPORE PTE. LTD.
    1 HarbourFront Avenue, #04-01 Keppel Bay 
    Tower, Singapore 098632
    CANON KOREA CONSUMER IMAGING INC.
    Canon BS Tower 5F, #168-12 Samseong-dong, 
    Gangnam-gu, Seoul, Korea
    OCEANIA
    CANON AUSTRALIA PTY. LTD.
    1 Thomas Holt Drive, North Ryde, N.S.W. 2113, 
    Australia
    CANON NEW ZEALAND LTD.
    Akoranga Business Park, Akoranga Drive, 
    Northcote, Auckland, New Zealand 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon projector REALiS SX6000 Pprojector Ro AV User Manual