Canon projector REALiS SX6000 Pprojector Ro AV User Manual

							101
Setting Display Status
User’s ManualSettin
g Functions from Menus
Performing Progressive 
Processing
[Progressive]
You can select this as required when the 
images have low resolution.
MENU > [Display settings] > [Progressive]
MENU > [Input settings] > [Progressive]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
Auto] is the factory default.
 When [HDMI In] (P127) is [Computer], this 
can only be set when the input signal is 
1080i, 1035i, 576i or 480i and the input 
signal color space is YCbCr422.
 Select [Off] when flickers and horizontal 
lines are noticeable in media that has a lot 
of fast-moving action.HDMIComponent
Digital PCAnalog PC
OffDoes not perform progressive 
processing.
OnPerforms progressive processing.
This mode is available when the 
HDMI signal is 1080i, or compo-
nent signal is 1080i, 1035i, 576i 
or 480i.
AutoPerforms the appropriate pro-
gressive processing according to 
the input signal. 
						

							Setting Display Status
102
Selecting a Menu Position
[Menu position]
You can change the position of menus dis-
played.
MENU > [Display settings] > [Menu position]
MENU > [Install settings] > [On screen] > [Menu 
position]
Move the menu to the desired position 
with the [ ] / [ ] / [ ] / [ ] buttons.When the menu has been moved to the 
desired position, press the OK, MENU or 
EXIT button (WX6000 / SX6000).
HDMIComponent
Digital PCAnalog PC 
						

							103
Setting Display Status
User’s ManualSettin
g Functions from Menus
Correcting the Screen 
Color
[Screen color]
You can adjust the color quality of the 
images projected according to the color of 
the projection screen.
MENU > [Display settings] > [Screen color]
MENU > [Install settings] > [Screen color]Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Normal] is the factory default.
HDMIComponent
Digital PCAnalog PC
NormalSelect this if a standard type of pro-
jection screen is used. The images 
are projected in a light quality similar 
to that of natural light.
Green-
boardSelect this if a greenboard (dark 
green color) is used for the projec-
tion screen. The color quality similar 
to [Normal] is obtained on the 
greenboard.
AdjustSelect this to make detailed adjust-
ment.
The following popup screen will 
appear.
Use the [ ] / [ ] buttons to select a 
primary color.
[] 
makes the color selected darker.[] makes the color selected lighter. 
						

							Setting Display Status
104
Reversing Projection
[Image flip H/V]
Select this setting if you want to hang the 
projector from the ceiling or project an 
image from behind the screen.
MENU > [Display settings] > [Image flip H/V]
MENU > [Install settings] > [Image flip H/V]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [None] is the factory default.
HDMIComponent
Digital PCAnalog PC
NoneSelect this to project an image 
normally.
Ceiling 
mountedSelect this to project an image 
with the projector hung from the 
ceiling.
The projected image is inverted 
in both vertical and horizontal 
directions.
RearSelect this to project an image 
from behind the screen.
The projected image is inverted 
in the horizontal direction.
Rear, Ceil-
ing mountedSelect this to project an image 
from behind the screen with the 
projector hung from the ceiling.
The projected image is inverted 
in the vertical direction. 
						

							105
Setting Display Status
User’s ManualSettin
g Functions from Menus
 To hang the projector from the ceiling, use 
the optional bracket. Contact the Canon 
Customer Support Center for more 
detailed information.
 If you flip the image, the keystone distor-
tion adjustment will be reset.
No Signal Screen
[No signal screen]
You can display either a black or blue 
screen when there is no input signal.
MENU > [Display settings]> [User screen set-
tings] > [No signal screen>
MENU > [System settings] > [User screen set-
tings] > [No signal screen]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Blue] is the factory default.
Normal projection (none)
Ceiling mounted projection
Rear projection
Rear ceiling mounted projection
HDMIComponent
Digital PCAnalog PC
BlackThe screen is all black.
BlueThe screen is all blue. 
						

							Setting Display Status
106
Screen When Blank
[Screen when blank]
You can display a black or blue screen and 
temporarily blank out the projected image 
by pressing the BLANK button on the 
remote control.
MENU > [Display settings] > [User screen set-
tings] > [Screen when blank]
MENU > [System settings] > [User screen set-
tings] > [Screen when blank]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Black] is the factory default.
Selecting a Logo at Star-
tup
[Projector on]
You can display a specified logo on the 
screen from the moment the projector is 
turned on to the moment it is ready for pro-
jection.
MENU > [Display settings] > [User screen set-
tings] > [Projector on]
MENU > [System settings] > [User screen set-
tings] > [Projector on]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Canon logo] is the factory default.
HDMIComponent
Digital PCAnalog PC
BlackThe screen is all black.
BlueThe screen is all blue.HDMIComponent
Digital PCAnalog PC
SkipProjects an input signal 
immediately after turning on 
the projector.
Canon logo
Displays the Canon logo that 
was registered in advance at 
the factory. 
						

							107
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting Aspect Ratio of 
Screen
[Screen aspect]
Select according to the aspect ratio of the 
projection screen. (P63)
MENU > [Display settings]> [Screen aspect]
MENU > [Install settings] > [Screen aspect]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 The factory default is [16:10] for the 
WUX5000 / WUX4000 / WX6000, and [4:3] 
for the SX6000.
 If you select [16:9 D. image shift], [4:3 D. 
image shift], or [16:10 D. image shift] (for 
SX6000), the keystone correction will be 
canceled. For more details, refer to page 
66.
 [Auto] may be automatically selected for 
the aspect depending on the screen 
aspect setting.
HDMIComponent
Digital PCAnalog PC
16:10Select this when you use a screen 
with an aspect ratio of 16:10.
16:9Select this when you use a screen 
with an aspect ratio of 16:9. 
4:3Select this when you use a screen 
with an aspect ratio of 4:3. 
16:10 D 
image 
shift 
(SX6000)
Select this when the screen 
aspect ratio is 16:10. Keystone 
correction cannot be performed in 
this mode. However when project-
ing level, it is possible to shift the 
image up or down. For details 
about how to shift the image, refer 
to page 67.
16:9
D. 
image 
shiftSelect this when you use a screen 
with an aspect ratio of 16:9. 
Keystone correction cannot be 
performed in this mode. However, 
it is possible to move the image 
up / down when projecting level.
For details about how to move the 
image, refer to page 67.
4:3
D. 
image 
shift 
(Except 
for 
SX6000)Select this when you use a screen 
with an aspect ratio of 4:3.
Keystone correction cannot be 
performed in this mode. However, 
it is possible to move the image 
left / right when projecting level.
For details about how to move the 
image, refer to page 68. 
						

							Setting Display Status
108
Adjusting Keystone Dis-
tortion
[Keystone adjustment]
Corrects keystone distortion.
MENU > [Install settings] > [Keystone adjust-
ment]
If the OK button or [ ] button is pressed, 
the Keystone adjustment screen is dis-
played.
Correct using the [ ] / [ ] / [ ] / [ ] but-
tons. When you have finished correcting, 
press the OK button.
 This cannot be selected when the screen 
aspect is 16:9D image shift, 16:10D image 
shift or 4:3D image shift.
 The Keystone adjustment screen can also be 
displayed by pressing the KEYSTONE but-
ton on the remote control. (P76)
Image Shift Adjustment
[Digital image shift]
Moves the position of the projected image.
MENU > [Install settings] > [Digital image shift]
If the OK button or [ ] button is pressed, 
the D image shift adjustment screen is dis-
played.
Correct using the [ ] / [ ] buttons. When 
you have finished correcting, press the OK 
button.
 This cannot be selected when the screen 
aspect is 16:9, 16:10 or 4:3.
 When the screen aspect is 16:9D image shift 
or 16:10D image shift (SX6000), the image 
can be adjusted vertically, and when the 
screen aspect is 4:3D image shift (WX6000), 
it can be adjusted horizontally.
HDMIComponent
Digital PCAnalog PC
HDMIComponent
Digital PCAnalog PC 
						

							109
User’s ManualSettin
g Functions from Menus
Selecting an Image Quality
Image Adjustment
[Image mode]
You can select an image mode suitable for 
the projected image. (P78)
You can also select it with the IMAGE but-
ton on the remote control. (P79)
MENU > [Image adjustment] > [Image mode]
(The screen is for the WUX5000.)
MENU > [Image adjustment] > [Image mode]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Standard] is the factory default.
 You can adjust the image quality by 
adjusting the following items in each 
image mode:
[Brightness], [Contrast], [Sharpness], 
[Gamma], [Color adjustment], 
[Advanced adjustment] and [Lamp 
mode] (WUX4000)
 The adjustment you have made is 
stored as each combination of input sig-
nals and an image mode.
 When a user memory that was saved in 
[Create profile] is selected, [Baseline 
Image Mode] appears in the menu. This 
indicates the image mode that was the 
base when the user memory was saved.
HDMIComponent
Digital PCAnalog PC
StandardSuitable for projecting a computer 
screen or watching media played 
with video software in a brightish 
room.
This image mode emphasizes 
white tones.
Presenta-
tionSuitable for viewing text-based 
images in a brightish room.
DynamicSuitable for watching media 
played with video software in a 
brightish room.
VividPhotoSuitable for viewing images with 
vibrant colors in a moderately 
dark room.
This image mode emphasizes 
color saturation.
Photo/
sRGBSuitable for projecting images 
taken with a digital camera that 
supports sRGB in a moderately 
dark room. Supports the sRGB 
standard.
VideoSuitable for watching video taken 
with a video camera in a moder-
ately dark room.
CinemaSuitable for watching media 
played with video software in a 
dark room.
This image mode enables viewers 
to enjoy the atmosphere of a 
movie theater.
User 1 - 5Up to 5 user-selected combina-
tions of image quality settings can 
be stored in the memory. (P110) 
Stored settings can be selected 
as an image mode. 
						

							Selecting an Image Quality
110
(The screen is for the WUX5000.)
Saving the Desired Image 
Quality
[Create profile]
Up to 5 combinations of image quality set-
tings can be stored. The stored image 
quality can be selected as an image mode.
MENU > [Image adjustment] > [Create Profile]
(The screen is for the WUX5000.)
MENU > [Image adjustment] > [Create profile]
Use the [ ] / [ ] buttons and select the 
save destination. (Saved memories are 
indicated by checkmarks.)
HDMIComponent
Digital PCAnalog PC