Canon projector REALiS SX6000 D Pprojector Ro AV User Manual

							231
Option
• Installing / Removing the Lens Unit
It is possible to use replace the lens unit. Regarding installation and replacement of the lens unit, con-
tact a qualified technician or the Canon Customer  Support Center for further information. Do not
attempt installation and replacement of the lens unit yourself.
• Precaution for qualified technicians
Before installation and replacement the lens unit,  check the part number and use the correct lens unit.
•Lamp
Part No.: RS-LP06 (WUX4000) RS-LP07 (WUX5000 / WX6000 / 
SX6000) • Air filter
Part No.: RS-FL01
• Standard Zoom Lens  Part No.: RS-IL01ST
• Ceiling attachment
Part No.: RS-CL11 • Long Zoom Lens 
Part No.: RS-IL02LZ
• Ceiling-mount pipe (400 - 600 mm)
Part No.: RS-CL08* • Short Fixed Lens 
Part No.: RS-IL03WF
• Ceiling-mount pipe (600 - 1000 mm)
Part No.: RS-CL09* • Ultra Long Zoom Lens
Part No.: RS-IL04UL
• Black top panel Part No.: RS-TC01 • Remote control
Part No.: RS-RC04 (WUX5000 / WUX4000) RS-RC05 (WX6000 / SX6000)
* Use the above materials to hang the projector from  the ceiling. For details, refer to the assembly and
installation manual provided with the ceiling attachment RS-CL11. 
						

							232
Menu Configuration 
Display settings Menu
AspectDigital PC / Analog PCP93Auto *
Full
16
:9
4:3
Tr u e  s i z e
HDMIAuto *
Full
16
:9
4:3
Zoom
Tr u e  s i z e
ComponentAuto *
16:9
4:3
Zoom
Tr u e  s i z e
Input signal 
selectAnalog PCP94
640x480
       :
1920x1200
ComponentP95Auto *
1080p
1080i
1035i
720p
576p
480p
576i
480i
Input signal
settingsAnalog PC
Total dotsP95
TrackingP96
Horizontal positionP96
Vertical positionP97
Horizontal pixelsP97
Vertical pixelsP98
HDMI input levelHDMIP98
Auto *
Normal
Expanded
HDMI color spaceHDMIP99Auto *
RGB
YCbCr
HDMI over scan *1HDMIP100
Off
On
ProgressiveComponent / HDMIP101Off
On
Auto *
Menu positionP102
Screen color Normal *P103Greenboard
AdjustRed / 
Green / Blue
Image flip H/V None *P104Ceiling mounted
Rear
Rear, Ceiling mounted
User screen 
settings
No signal screen BlackP105Blue*
Screen when blank Black *P106Blue
Projector on SkipP106Canon logo*Return
Screen aspect 16:10*P10716:9
4:3
16:9 D. image shift
4:3 D. image shift 
						

							233
Menu Configuration
Image Adjustment Menu
Factory default settings for *1, *2 and *3 are set accord-
ing to the following conditions.

In] is [Computer]), the factory default is [Off].

[Auto]), the factory default is [On].

default is [Off].


tal PC or Analog PC, if any image mode is used
except [VividPhoto], the factory default is [Off].
If [VividPhoto] is used, the factory default is
[Middle].

nent, the factory default is [Weak], regardless of
the image mode. 

Image modeCOMMONP109Standard *
Photo/sRGB
User 1 - 5 (as creating 
profile)
Digital PC / Analog PC / 
HDMI (when [HDMI In] 
is [Computer])P109
Presentation
VividPhoto
Component / HDMI 
(when [HDMI In] is [Auto])P109
Dynamic
Video
Cinema
Create ProfileP110Baseline Image 
Mode (when user 
memory is selected)P110
BrightnessP111ContrastP112SharpnessP113GammaP113
Color adjustmentP114
Color levelColor balanceColor temperatureR GainG GainB GainR OffsetG OffsetB Offset
Advanced adjustment
Ambient light Off *P115Adjust
Type TungstenFluorescent
Fluores-
cent H
Level L
M
H
Return
Noise reduction *2Component / HDMIP116Off
Weak
Middle
Strong
Dynamic gamma Off *1P116Weak *2
Middle
Strong
Mem. color correct *3OffP117L
M
H
6-axis color adjust Off *P117
AdjustHue / Saturation / 
Brightness
Reset
Fine-Tune GammaP118
Return
Lamp mode *4 Normal *P119Quiet
Reset OK / CancelP119 
						

							Menu Configuration
234
System Settings MenuNetwork Setting Menu
Information Menu
* : Factory defaults (setting after reset)
Power management 
modeOff *P120
Standby
Exit
Direct power on Off *P121On
Beep OffP122On *
Key lock Off *P123Main unit
Remote control
Remote control Ch1P124Ch2
Ch3
Ch4
Independent *
LanguageEnglish TurkishP125German Polish
French Hungarian
Italian Czech
Spanish Danish
Portuguese Arabic
SwedishChinese 
(Simplified)
RussianChinese 
(Traditional)
Dutch Korean
Finnish Japanese
Norwegian
Guide OffP126
On *
Show Input Status OffP127On *
HDMI InAuto *P127Computer
Other settings
Password settings Off *P128On
Register password Password inputP129
Lens Ctrl Lock Off *P130On
Lens shift Reset Lens shift ResetP131
Menu display time Normal *P132Extended
Overheat Warning Dis-
playOff *P133
On
Deflicker Off *P134Adjust
Lamp counter ReturnP135Reset (OK / Cancel)
Factory defaults OK / CancelP140
Return
Network setting lock UnlockP171Lock *
Network function Off *P172On
Network Password setting OffP173On *
Register Network Pass-
wordPassword inputP173
PJLink OffP174On *
DHCP Off *P175On
TCP/IP setting IP addressP175Subnet mask
Gateway address
Enter
Network setting initializa-
tionYe s  /  N oP176
Model nameP141Input signalFirmwareSerial No.IP addressGateway addressE-mail sender addressE-mail recipient addressProjector nameLocationSystem information ID 
						

							235
Menu Configuration
Input Settings Menu
AspectDigital PC / Analog PC-1 / 2 /
HDMI (when [HDMI In] is
[PC])P93
Auto *
16:10
16:9
4:3
Tr u e  s i z e
HDMI (when [HDMI In] is
[Auto]) /Component
Auto *
16:10
16:9
4:3
Zoom
Tr u e  s i z e
Auto PC
P94
Input signal 
selectAnalog PC-1 / 2P94
640 x 480
       :
1920 x1200
Input signal set-
tingsAnalog PC-1 / 2
Total dotsP95
TrackingP96
Horizontal positionP96
Vertical positionP97
Horizontal pixelsP97
Vertical pixelsP98
HDMI input levelHDMIP98Auto *
Normal
Expanded
HDMI color 
spaceHDMIP99
Auto *
RGB
YCbCr
HDMI over 
scan*1HDMIP100
Off
On
ProgressiveComponent / HDMIP101
Off
On
Auto * 
						

							Menu Configuration
236
Image Adjustment Menu
Image modeCOMMONP109
Standard *
Photo/sRGB
User 1 - 5 (when creating 
profile)
Digital PC / 
Analog PC-1/2 / 
HDMI (when [HDMI In] is 
[Computer]) P109
Presentation
VividPhoto
Component / HDMI (when 
[HDMI In] is [Auto]) P109
Dynamic
Video
Cinema
Create Profile P110Save profile
(When profile is 
selected)P110
Baseline Image 
Mode (When pro-
file is selected)P111
Brightness
P111ContrastP112SharpnessP113GammaP113
Color adjustmentP114
Color levelColor balanceColor temperatureR GainG GainB GainR OffsetG OffsetB Offset
Advanced adjustment
Ambient light Off *P115Adjust
Type TungstenFluorescent
Fluorescent 
H
Level L
M
H
Return
Noise reduction *2Component / HDMIP116Off
Weak
Middle
Strong
Dynamic gamma Off *1P116Weak *2
Middle
Strong
Mem. color correct *3OffP117L
M
H
6-axis color adjust Off *P117
AdjustHue / Saturation / 
Brightness
Reset
Fine-Tune GammaP118
Return
Reset OK / CancelP119 
						

							237
Menu Configuration
Install settings Menu
*1 - *5: Factory default settings are set according to the 
following conditions.

[HDMI In] is [Computer]), the factory default is
[Off].

[Auto]), the factory default is [On].

default is [Off].


tal PC or Analog PC-1/2, if any image mode is
used except [VividPhoto], the factory default is
[Off]. If [VividPhoto] is used, the factory default
is [Middle].

nent, the factory default is [Weak], regardless of
the image mode.


Positional lock Off *P139
On
Test pattern Off *P138
On
Screen aspect 16:10 *5P107
16:9
4:3 *4
16:10 D. image shift 
(SX6000)
16: 9 D. image shift
4:3 D. image shift 
(WX6000)
Keystone adjustmentKeystone adjustmentP108
Digital image shift D. image shift adjustmentP108
Image flip H/V  None*P104
Ceiling mounted
Rear
Rear, Ceiling mounted
Lens shift reset Lens shift resetP131
Audio in terminal select
HDMI OffP139
Audio in 1
Audio in 2
HDMI *
Digital PC OffP139
Audio in 1
Audio in 2 *
Analog PC-1 OffP139
Audio in 1 *
Audio in 2 
Analog PC-2 OffP139
Audio in 1
Audio in 2 *
Component OffP139
Audio in 1 *
Audio in 2
Screen color Normal *P103
Greenboard
Adjust
On screen
Menu positionP102
Guide OffP126
On *
Show input status OffP127
On *
Overheat warning displayOff *P133
On
Menu display time Normal *P132
Extended
Lamp warning display OffP135
On *
Filter warning display OffP137
On * 
						

							Menu Configuration
238
System Settings MenuNetwork Setting Menu
Information Menu
* : Factory defaults (setting after reset)
Power management modeOff *P120
Standby
Exit
Direct power on Off * P121
On
User screen settings
No signal screen Black P105
Blue *
Screen when blank Black * P106
Blue
Projector on Skip P106
Canon logo *
Beep Off  P122
On *
Key Repeat Off  P122
On *
Key lock Off * P123
Main unit
Remote (wireless)
Remote control Ch1 P124
Ch2
Ch3
Ch4
Independent*
HDMI In Auto * P127
Computer
LanguageEnglish TurkishP125German Polish
French Hungarian
Italian Czech
Spanish Danish
Portuguese Arabic
Swedish Chinese 
(Simplified)
Russian Chinese 
(Traditional)
Dutch Korean
Finnish Japanese
Norwegian
Other settings
Password settings Off * P128
On
Register password Password input P129
Gamma restore OffP134
Adjust
Lamp counter ReturnP135Reset (OK / Cancel)
Filter counter ReturnP137Reset (OK / Cancel)
Factory defaults OK /  Cancel P140
Return
Network setting lock UnlockP171Lock *
Network functionOff *P172On
Network Password setting OffP173On *
Register Network Pass-
wordPassword inputP173
PJLink
OffP174On *
DHCPOff *P175On
TCP/IP settingIP addressP175Subnet mask
Gateway address
Enter
Network setting initializa-
tion Ye s  /  N oP176
Model name
P141Input signalFirmwareSerial No.IP addressGateway addressE-mail sender addressE-mail recipient addressProjector nameLocationSystem information ID 
						

							239
Menu Configuration 
						

							©CANON INC.2011 CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 
146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-
1198, U.S.A.
For all inquires concerning this product, call toll 
free in the U.S. 1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 
1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 
1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 
7K7, Canada
For all inquiries concerning this product, call toll 
free in Canada
1-800-OK-CANON
EUROPE, AFRICA & MIDDLE EAST
CANON EUROPE LTD.
3 The Square Stockley Park, Uxbridge, Middle-
sex, UB11 1ET United Kingdom
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, 
The Netherlands
CANON FRANCE S.A.S
17, quai du President Paul Doumer, 92414 
Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate Surrey RH2 8BF, United 
Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Ger-
many
CANON ITALIA S.p.A.
Via Milano 8 I-20097 San Donato Milanese, Mil-
ano, Italy
CANON Schweiz AG
Geschäftsbereich Wiederverkauf, Industri-
estrasse 12, CH-8305 Dietlikon,
Switzerland
CANON GMBH
Zetschegasse 11, A-1230 Wien, Austria
CANON España, S.A.
Av. De Europa, 6 Alcobendas 28108 Madrid, 
SpainCANON PORTUGAL S.A.
Rua Alfredo da Silva, 14 Alfragide 2610-016 
Amadora, Portugal
CANON Belgium N.V. / S.A.
Berkenlaan 3, 1831 Diegem (Mechelen), Bel-
gium
CANON Netherland NV
Neptunusstraat 1, 2132 JA Hoofddorp, The 
Netherlands
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxem-
bourg
CANON DANMARK A / S
Knud Hoejgaards Vej 1 DK-2860 Soeborg, Dan-
mark
CANON OY
Huopalahdentie 24 PL 1 00351 Helsinki, Fin-
land
CANON SVENSKA AB
Gustav III:s Boulevard 26 169 88 Solna, Swe-
den
CANON NORGE as
Hallagerbakken 110, Postboks 33, Holmlia, 
1201 Oslo, Norway
CENTRAL & SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Ste. 400 Miami, FL 33126, 
U.S.A.
ASIA
CANON (China) Co., Ltd.
15F Jinbao Building No.89 Jinbao Street, 
Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19 / F., The Metropolis Tower, 10 Metropolis 
Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay 
Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Canon BS Tower 5F, #168-12 Samseong-dong, 
Gangnam-gu, Seoul, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, N.S.W. 2113, 
Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, 
Northcote, Auckland, New Zealand