Canon projector REALiS SX6000 D Pprojector Ro AV User Manual

							11
Table of Contents
Table of Contents■ When projecting on a 16:10 screen in the aspect ratio of the connected device......... 215
■ When projecting on a 16:9 screen in the aspect ratio of the connected device........... 216
Displayed Test Patterns........................................................................................... 217
Supported Signal Types .......................................................................................... 218
Product Specifications ............................................................................................ 219
■ Projector ........................................................................................................................ 219
■ Remote control .............................................................................................................. 221
■ Specification of Each Lens Unit (Option) ...................................................................... 221
■ External View ................................................................................................................. 223
■ ANALOG PC (WUX5000 / WUX4000), ANALOG PC-1 (WX6000 / SX6000) / 
COMPONENT IN Terminal ................................................................................................ 223
■ Service Port (CONTROL) ............................................................................................... 224
Index ..........................................................................................................................228
Menu Configuration ................................................................................................ 232 
						

							12
Safety Instructions
Before installing and operating the projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the projector 
properly enables you to manage those features and maintain it in good condition for 
many years to come.
Improper operation may result in not only shortening the product life, but also malfunc-
tions, fire hazards, or other accidents.
If your projector does not seem to be operating properly, read this manual again, check 
operations and cable connections, and try the solutions in the “Troubleshooting” section 
in the back of this manual. If the problem still persists, contact the Canon Customer Sup-
port Center.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE 
EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUT-
ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING 
AND MAINTENANCE INSTRUCTIONS FOR THIS UNIT IN THE OWNER’S 
MANUAL.
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Elec-
tronic Computer / Data Processing Equipment, ANSI / NFPA 75.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN 
						

							13
Safety Instructions
Safety Instructions
Safety Precautions
WARNING:
• THIS APPARATUS MUST BE GROUNDED.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPLIANCE TO RAIN OR MOISTURE.
 This projector produces intense light from the projection lens. Do not stare directly into 
the lens, otherwise eye damage could result. Be especially careful that children do not 
stare directly into the beam.
 Install the projector in a proper position. Otherwise it may result in a fire hazard.
 Allowing the proper amount of space on the top, sides, and rear of the projector cabinet 
is critical for proper air circulation and cooling of the unit. The diagrams shown here 
indicates the minimum space required. If the projector is to be built into a compartment 
or similarly enclosed, these minimum distances must be maintained.
 Do not cover the ventilation slots on the projector. Heat build-up can reduce the service 
life of your projector, and can also be dangerous.
 If the projector is unused for an extended time, unplug the projector from the power out-
let.
 Do not project the same image for a long time. 
An afterimage may remain on the LCD panels due to the characteristics of the panels of 
the projector.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the ceiling, clean the air intake vents and top of the pro-
jector periodically with a vacuum cleaner. If you leave the projector unclean for a long 
time, the cooling fans can be clogged with dust, and it may cause a breakdown or a 
disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH 
AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJEC-
TOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIO-
RATED.
SIDE and TOP REAR
50 cm (1.6)50 cm (1.6)
50 cm (1.6)
50 cm (1.6) 
						

							Safety Instructions
14
■READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the 
product.
Read all of the instructions given here and retain them for later use. Unplug this projector 
from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the 
projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the projector during a lightning storm, or when it is left unat-
tended or unused for long periods of time, unplug it from the wall outlet. This will prevent 
damage due to lightning and power surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a 
swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may result in haz-
ards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, 
causing serious injury to a child or adult, and serious damage to the projector. Use only 
with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or 
shelf mounting should be carried out in accordance with the manufacturer’s directions, 
and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause the 
appliance and cart combination to overturn.
Slots and openings in the rear and front of the cabinet are provided for 
ventilation, to insure reliable operation of the equipment and to protect 
it from overheating.
The openings should never be covered with cloth or other materials, and the bottom 
opening should not be blocked by placing the projector on a bed, sofa, rug, or other sim-
ilar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless 
proper ventilation is provided. 
						

							15
Safety Instructions
Safety Instructions
Never push objects of any kind into this projector through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the 
marking label. If you are not sure of the type of power supplied, contact the Canon Cus-
tomer Support Center or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. 
Do not allow anything to rest on the power cord. Do not locate this projector where the 
cord may be damaged by people walking on it.
Do not attempt to service this projector yourself as opening or removing covers may 
expose you to dangerous voltages or other hazards. Refer all servicing to qualified ser-
vice personnel.
Unplug this projector from the wall outlet and refer servicing to qualified service person-
nel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally after following the operating instructions. 
Adjust only those controls that are covered in the operating instructions as improper 
adjustment of other controls may result in damage and will often require extensive work 
by a qualified technician to restore the projector to normal operating condition.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a need for 
servicing.
When replacement parts are required, be sure the service technician uses replacement 
parts specified by the manufacturer that have the same characteristics as the original 
parts. Unauthorized substitutions may result in fire, electric shock, or injury.
Upon completion of any service or repairs to this projector, ask the service technician to 
perform routine safety checks to determine that the projector is in safe operating condi-
tion. 
						

							Safety Instructions
16
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the 
country you purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EAS-
ILY ACCESSIBLE.
AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is 
listed by the Underwriters Laboratories (UL) and certified by the 
Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug. This is a 
safety feature to ensure the plug fits into the power outlet. Do not 
try to tamper with this safety feature. Should you be unable to 
insert the plug into the outlet, contact your electrician.
NOTE FOR CUSTOMERS IN THE US
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED 
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
European Union (and EEA) only.
These symbols indicate that this product is not to be disposed of with 
your household waste, according to the WEEE Directive (2002/96/EC), 
the Battery Directive (2006/66/EC) and / or your national laws imple-
menting those Directives. If a chemical symbol is printed beneath the 
symbol shown above, in accordance with the Battery Directive, this 
indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = 
Lead) is present in this battery or accumulator at a concentration above 
an applicable threshold specified in the Battery Directive. This product 
should be handed over to a designated collection point, e.g., on an 
authorized one-for-one basis when you buy a new similar product or to 
an authorized collection site for recycling waste electrical and elec-
tronic equipment (EEE) and batteries and accumulators. Improper han-
dling of this type of waste could have a possible impact on the 
environment and human health due to potentially hazardous sub-
stances that are generally associated with EEE. Your cooperation in the 
correct disposal of this product will contribute to the effective usage of 
natural resources. For more information about the recycling of this 
product, please contact your local city office, waste authority, approved 
scheme or your household waste disposal service or visit 
www.canon-europe.com/environment
.
(EEA: Norway, Iceland and Liechtenstein)
Ground 
						

							17
Safety Instructions
Safety Instructions
Federal Communication Commission Notice
Multimedia Projector, Model: WUX5000 / WUX4000 / WX6000 / SX6000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may 
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures:
 Reorient or relocate the receiving antenna. 
 Increase the separation between the equipment and receiver. 
 Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
 Consult the dealer or an experienced radio / TV technician for help.
The cable with a ferrite core provided with the projector must be used with this equip-
ment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Use of a shielded cable is required to comply with class B limits in Subpart B of Part 15 
of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified 
in the instructions. If such changes or modifications should be made, you could be 
required to stop operation of the equipment.
Canon U.S.A. Inc. 
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. 
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003. 
						

							Safety Instructions
18
Precautions for Use
As this section contains important safety-related information, be sure to read the following
carefully beforehand in order to use your projector correctly and safely.
If the following situations occur, turn the power off, remove the power plug from the 
power outlet and contact the Canon Customer Support Center. Failure to do so could 
cause a fire or result in an electric shock. 
 If smoke is emitted
 If an unusual smell or noise is emitted
 If a loud noise is heard and the lamp turns off
 If water or other liquid has entered the projector
 If metal or any other foreign material has entered the projector
 If the projector is knocked over or dropped and the cabinet is damaged
Pay attention to the following points for handling the power cord. Failing to pay atten-
tion to these points could cause a fire, electric shock or personal injury. 
 Do not place any objects on the power cord and do not allow it to become trapped 
under the projector. The power cord may be damaged.
 Do not cover the power cord with a carpet.
 Do not excessively bend, twist, pull or make modifications to the power cord.
 Keep the power cord away from heaters and other sources of heat.
 Do not use the power cord when it is bent finely, coiled or bundled.
 Do not use a damaged power cord. If your power cord is damaged, contact the 
Canon Customer Support Center.
 Do not use any power cord other than the type that is included with this projector.
 Be sure to connect the ground wire of the power cord to ground. Failure to do so 
could result in an electric shock.
 Be sure to connect the ground wire before connecting the power plug to the outlet. 
Also when you disconnect the ground wire, be sure to unplug the power plug from 
the outlet beforehand.
Warning
Warning 
						

							19
Safety Instructions
Safety Instructions
Precautions for Installation
Pay attention to the following points regarding the power source, power plug and han-
dling of the connector. Failure to do so could result in a fire, electric shock or personal 
injury. 
 Do not use any power source with a voltage other than the voltage indicated (AC 100 
– 240 V).
 Do not pull the power cord and be sure to hold the power plug or connector when 
removing. The cord could be damaged as a result.
 Do not insert any metal objects into the contact parts of the power plug or connector.
 Remove the power plug from the outlet before performing cleaning or maintenance 
of the projector.
 Do not remove the power plug or connector with wet hands.
 Insert the power plug and connector securely up to the base. Additionally, do not 
use a damaged power plug or an outlet that is loose.
 If using an extension cord attached to the outlet, make sure that the total electric 
power consumption of connected devices does not exceed the rated capacity.
 Periodically inspect the power plug and outlet and remove any dust or dirt from 
between the plug and the outlet.
Pay attention to the following points regarding installation and handling of the projector. 
Failure to do so may cause a fire, electric shock or personal injury.
 Do not use the projector in a bathroom or shower room.
 Do not use the projector in rain or snow, by the sea, or in close proximity to a body of 
water.
 Do not place containers containing a liquid on top of the projector.
 Do not place the projector in any location where it will be exposed to oily smoke or 
steam, such as a kitchen work surface or table etc.
 Do not touch the projector itself, the power cord, or the cable if lightening strikes.
Warning
Warning 
						

							Safety Instructions
20
Pay attention to the following points regarding installation and handling of the projector. 
Failure to do so may cause a fire, electric shock or personal injury.
 Do not move the projector until you have switched off the power, removed the power 
plug from the power outlet and unplugged any other cables.
 Before installing or replacing a lens unit, make sure to remove the power plug from 
the outlet. Failure to do so could result in an electric shock or injury.
 Do not remove the cabinet from the projector or disassemble it. The interior of the 
projector contains high-voltage components as well as parts that are hot. These 
could cause an electric shock or burn. If inspection, maintenance or repair is 
required, contact the Canon Customer Support Center.
 Do not disassemble or modify the projector (including consumable parts) or the 
remote control.
 Do not insert any object into vents in the projector, such as the air intake vent or 
exhaust vents.
 Do not place a pressurized can in front of the exhaust vents. The pressure of the 
contents of the can may increase due to heat from the exhaust vents and this could 
result in an explosion.
 As strong light beams are emitted while the projector is in use, do not look directly 
into the projector lens. Doing so could cause an eye injury. Pay particular attention in 
preventing young children to do so.
 When giving a presentation in front of the projector while it is projecting an image, 
conduct your presentation from a position where your shadow will not be cast on the 
screen and where you do not feel blinded by light from the projector.
Pay attention to the following points regarding installation and handling of the projec-
tor.
 If the projector will not be used for a long period of time, be sure to remove the 
power plug from the power outlet to ensure safety. Failure to do so could cause a 
fire. 

The temperature of the cabinet around and above the exhaust vents can become hot 
during projector operation. 
Touching these areas during operation could cause 
burns to the hands.
Do not touch these areas. Doing so may cause burns. Pay particular attention in pre-
venting young children from touching these parts. Additionally, do not place any 
metal objects on these areas. Due to the heat from the projector, doing so could 
cause an accident or personal injury.
Warning
Caution