Canon projector REALiS SX6 User Manual

131
APPENDIX
Component (P25, 62, 90)
A signal system used to send a color signal
(C) with it divided into a B-Y color difference
signal and an R-Y color difference signal.
This system can project a better-quality
image as compared with the composite sig-
nal system. Connect the component video
terminal on the AV equipment and the Input
Terminal-2 on this projector with a component
cable. Select [COMPONENT] at projection.
Composite (P25, 64)
A video signal system used to send a bright-
ness signal (Y) and...

132
APPENDIX
Memorized Color Correction (P104)
A memorized color is a color in our memory.
The memorized color such as blue for the sky
is more vivid than the real color, so you may
feel colors of a projected image are dull. If
such is the case, enable the memorized color
correction function to make the colors close
to the ones in our memory. You can enable
the memorized color correction function in
the image adjustment menu.
Offset (P103)
A parameter that shifts the reproduction
range of a brightness...

133
APPENDIX
S-video (P25, 64, 90)
A signal system (YC separation signal) used
to send a brightness signal (Y) and color sig-
nal (C) separately. Connect the S-video ter-
minal on the AV equipment and the S-VIDEO
IN terminal on this projector with an S-video
cable. Select [S-VIDEO] at projection.
Tracking (P91)
To reproduce an image from an analog
image signal, the process to accumulate
image information at the appropriate timing
with reference to the synchronization signal
within the image signal. This...

134
APPENDIX
Specifications
Projector
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the charac-
teristics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
Remote Control
Model name SX7/SX6/SX60/X700
Display system RGB liquid crystal system
Optical system Color separation by dichroic mirror/polar izing beam splitter and color composition...

135
APPENDIX
External View
Input terminal-2 (ANALOG IN-2) (Analog PC-2 input/component input terminal)
This terminal is used as a computer analog PC input or component input terminal. Use a D-
sub computer cable for connection.
Mini D-sub 15-pin
1R 9+5 V power
2 G 10 Ground (Vertical sync.)
3 B 11 Monitor ID0
4 Monitor ID2 12 DDC data
5 Ground (Horizontal sync.) 13 Horizontal sync.
6 Ground (R) 14 Vertical sync.
7 Ground (G) 15 DDC clock
8 Ground (B)
zThe terminal specifications for the analog PC-2 input...

136
INDEX
Index
Numerics
6-axis color adjust  ........................ 105, 130
A
Adjusting keystone distortion  ................. 50
AdobeRGB  ............................. 53, 100, 130
Air filter  ................................................. 117
ANALOG IN-1  .................................. 24, 34
ANALOG IN-2  ............................ 24, 34, 62
Analog PC  ................................ 34, 46, 130
Aspect  ................................ 55, 71, 88, 130
AUDIO IN terminal...

137
INDEX
M
Mem. color correct  ............................... 104
Memorized color correction  ................. 132
Menu ...................................................... 84
Menu configuration  .............................. 140
Menu position ......................................... 94
Mouse operation  .................................... 80
MUTE ..................................................... 76
N
NO SHOW  ........................................ 76, 98
No signal screen...

138
Options
* This part is used to hang the projector from a ceiling.
** This part is used to join the ceiling pipe with the ceiling mounting bracket.
For more detailed information, refer to the instruction manual that comes with the ceiling mounting
bracket RS-CL06.zLamp Part No.
SX7/X700: RS-LP04
SX6: RS-LP02
SX60: RS-LP03
zCeiling mounting bracket Part No: RS-CL06
zCeiling mounting pipe (360mm)
Part No: RS-CL03*
zCeiling mounting pipe (550mm)
Part No: RS-CL04*zCeiling mounting pipe (760mm)
Part No:...

139 

140
Menu Configuration
The Display settings menu
* : Factory defaults (settings after reset)
AspectDIGITAL PC/ANALOG PCP88Full screen *
4:3
Auto
Wide
True size
VIDEO/S-VIDEO/SCARTP89Full screen *
4:3
Wide
DIGITAL VIDEO/COMPO-
NENTP88
Auto *
Full screen
4:3
Wide
Input signal select
ANALOG PCP89640 x 480
1280 x 1024
VIDEO/S-VIDEOP90Auto *
NTSC
PA L
SECAM
NTSC4.43
PA L - M
PA L - N
COMPONENTP90Auto *
1080i
1035i
720p
575p
480p
575i
480i
SCARTP90575i
Input signal settings
ANALOG PC
Total...