Canon projector REALiS SX6 User Manual
Here you can view all the pages of manual Canon projector REALiS SX6 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
91
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Total Number of Dots
[Total dots]
You can select the total number of dots in the
horizontal direction. Adjust the number of dots
when the image distorts or noise is displayed on
the screen at both sides.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Tracking
[Tracking]
You can fine-tune the timing for generating an
image from the image signal. Adjust the tracking
when the image flickers or distorts.
T
T
T
Press the...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-90.png "Page 91
91
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Total Number of Dots
[Total dots]
You can select the total number of dots in the
horizontal direction. Adjust the number of dots
when the image distorts or noise is displayed on
the screen at both sides.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Tracking
[Tracking]
You can fine-tune the timing for generating an
image from the image signal. Adjust the tracking
when the image flickers or distorts.
T
T
T
Press the...")
91 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Adjusting the Total Number of Dots [Total dots] You can select the total number of dots in the horizontal direction. Adjust the number of dots when the image distorts or noise is displayed on the screen at both sides. T T T Press the [MENU] button when you finish. Adjusting the Tracking [Tracking] You can fine-tune the timing for generating an image from the image signal. Adjust the tracking when the image flickers or distorts. T T T Press the...
Page 92
![Page 92
92
SETTING UP FUNCTIONS FROM MENUS
Adjusting the Horizontal Position
[Horizontal position]
You can adjust the horizontal position of the
screen when the projected image is shifted in
the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Vertical Position
[Vertical position]
You can adjust the vertical position of the screen
when the projected image is shifted in the verti-
cal direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-91.png "Page 92
92
SETTING UP FUNCTIONS FROM MENUS
Adjusting the Horizontal Position
[Horizontal position]
You can adjust the horizontal position of the
screen when the projected image is shifted in
the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Vertical Position
[Vertical position]
You can adjust the vertical position of the screen
when the projected image is shifted in the verti-
cal direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal...")
92 SETTING UP FUNCTIONS FROM MENUS Adjusting the Horizontal Position [Horizontal position] You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. T T T Press the [MENU] button when you finish. Adjusting the Vertical Position [Vertical position] You can adjust the vertical position of the screen when the projected image is shifted in the verti- cal direction. T T T Press the [MENU] button when you finish. Display settings Input signal...
Page 93
![Page 93
93
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Number of Horizontal Pixels
[Horizontal pixels]
You can adjust the number of the pixels in the
horizontal direction if the length of the screen is
too long or too short in the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Number of Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in the
vertical direction if the length of the screen is too
long or too short in the vertical...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-92.png "Page 93
93
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Number of Horizontal Pixels
[Horizontal pixels]
You can adjust the number of the pixels in the
horizontal direction if the length of the screen is
too long or too short in the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Number of Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in the
vertical direction if the length of the screen is too
long or too short in the vertical...")
93 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Adjusting the Number of Horizontal Pixels [Horizontal pixels] You can adjust the number of the pixels in the horizontal direction if the length of the screen is too long or too short in the horizontal direction. T T T Press the [MENU] button when you finish. Adjusting the Number of Vertical Pixels [Vertical pixels] You can adjust the number of the pixels in the vertical direction if the length of the screen is too long or too short in the vertical...
Page 94
![Page 94
94
SETTING UP FUNCTIONS FROM MENUS
Performing Progressive Processing
[Progressive]
You can accumulate and composite information
for a signal for a low resolution image to convert
it to a high resolution image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Menu Position
[Menu position]
You can select the position of the menu dis-
played on the screen.
T
T
Move the menu to the desired position with [ ],
[], and then press the [OK] button.
Press the [MENU] button when...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-93.png "Page 94
94
SETTING UP FUNCTIONS FROM MENUS
Performing Progressive Processing
[Progressive]
You can accumulate and composite information
for a signal for a low resolution image to convert
it to a high resolution image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Menu Position
[Menu position]
You can select the position of the menu dis-
played on the screen.
T
T
Move the menu to the desired position with [ ],
[], and then press the [OK] button.
Press the [MENU] button when...")
94 SETTING UP FUNCTIONS FROM MENUS Performing Progressive Processing [Progressive] You can accumulate and composite information for a signal for a low resolution image to convert it to a high resolution image. T T Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Menu Position [Menu position] You can select the position of the menu dis- played on the screen. T T Move the menu to the desired position with [ ], [], and then press the [OK] button. Press the [MENU] button when...
Page 95
![Page 95
95
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Performing the Ceiling-mounted/Rear
Projection
[Image flip H/V]
You can make this setting if you want to hang the
projector from the ceiling or project an image on
a transmissive screen.
T
T
Press the [MENU] button when you finish.
Display settings
Image flip H/V
Select this if you project an image
normally.
Select this if you project an image
with the projector hung from the
ceiling. The projected image is
inverted in both vertical and hori-...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-94.png "Page 95
95
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Performing the Ceiling-mounted/Rear
Projection
[Image flip H/V]
You can make this setting if you want to hang the
projector from the ceiling or project an image on
a transmissive screen.
T
T
Press the [MENU] button when you finish.
Display settings
Image flip H/V
Select this if you project an image
normally.
Select this if you project an image
with the projector hung from the
ceiling. The projected image is
inverted in both vertical and hori-...")
95 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Performing the Ceiling-mounted/Rear Projection [Image flip H/V] You can make this setting if you want to hang the projector from the ceiling or project an image on a transmissive screen. T T Press the [MENU] button when you finish. Display settings Image flip H/V Select this if you project an image normally. Select this if you project an image with the projector hung from the ceiling. The projected image is inverted in both vertical and hori-...
Page 96
![Page 96
96
SETTING UP FUNCTIONS FROM MENUS
Correcting the Screen Color
[Screen color]
You can adjust the while balance so that white
portions of the image are displayed correctly.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Capturing a Logo to Be Projected
[Logo capture]
You can project a desired image (logo) when
you turn on the projector, there is no input signal,
or you blacken a projecting image temporarily.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU]...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-95.png "Page 96
96
SETTING UP FUNCTIONS FROM MENUS
Correcting the Screen Color
[Screen color]
You can adjust the while balance so that white
portions of the image are displayed correctly.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Capturing a Logo to Be Projected
[Logo capture]
You can project a desired image (logo) when
you turn on the projector, there is no input signal,
or you blacken a projecting image temporarily.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU]...")
96 SETTING UP FUNCTIONS FROM MENUS Correcting the Screen Color [Screen color] You can adjust the while balance so that white portions of the image are displayed correctly. T T Press the [OK] button to confirm, and then press the [MENU] button. Capturing a Logo to Be Projected [Logo capture] You can project a desired image (logo) when you turn on the projector, there is no input signal, or you blacken a projecting image temporarily. T T T Press the [OK] button to confirm, and then press the [MENU]...
Page 97
![Page 97
97
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Logo Display Position
[Logo position]
You can select a logo display position. You can
place the logo at the center or a corner of the
screen.
T
T
T
Press the [MENU] button when you finish.
Displaying a Logo (No signal screen)
[No signal screen]
You can display a logo on a screen when there is
no input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
Logo position...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-96.png "Page 97
97
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Logo Display Position
[Logo position]
You can select a logo display position. You can
place the logo at the center or a corner of the
screen.
T
T
T
Press the [MENU] button when you finish.
Displaying a Logo (No signal screen)
[No signal screen]
You can display a logo on a screen when there is
no input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
Logo position...")
97 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Selecting a Logo Display Position [Logo position] You can select a logo display position. You can place the logo at the center or a corner of the screen. T T T Press the [MENU] button when you finish. Displaying a Logo (No signal screen) [No signal screen] You can display a logo on a screen when there is no input signal. T T T Press the [OK] button to confirm, and then press the [MENU] button. Display settings User screen settings Logo position...
Page 98
![Page 98
98
SETTING UP FUNCTIONS FROM MENUS
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a logo on a screen when the
projected image is blackened out temporarily by
pressing the [NO SHOW] button.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to the
moment it is ready for projection.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU]...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-97.png "Page 98
98
SETTING UP FUNCTIONS FROM MENUS
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a logo on a screen when the
projected image is blackened out temporarily by
pressing the [NO SHOW] button.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to the
moment it is ready for projection.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU]...")
98 SETTING UP FUNCTIONS FROM MENUS Displaying a Logo (NO SHOW) [NO SHOW] You can display a logo on a screen when the projected image is blackened out temporarily by pressing the [NO SHOW] button. T T T Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Logo at Startup [Projector on] You can display a specified logo on a screen from the moment the projector is turned on to the moment it is ready for projection. T T T Press the [OK] button to confirm, and then press the [MENU]...
Page 99
![Page 99
99
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting Aspect Ratio of the Screen
[Screen aspect]
You can select the aspect ratio of the projecting
screen.
T
T
Press the [MENU] button when you finish.
Display settings
Screen aspect
Select this when you use a screen
with aspect ratio of 4:3.
Select this when you use a screen
with aspect ratio of 16:9.
Select this when you use a screen
with aspect ratio of 16:9 and you
want to move the projecting position
vertically.
zIf you select [16:9] or...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-98.png "Page 99
99
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting Aspect Ratio of the Screen
[Screen aspect]
You can select the aspect ratio of the projecting
screen.
T
T
Press the [MENU] button when you finish.
Display settings
Screen aspect
Select this when you use a screen
with aspect ratio of 4:3.
Select this when you use a screen
with aspect ratio of 16:9.
Select this when you use a screen
with aspect ratio of 16:9 and you
want to move the projecting position
vertically.
zIf you select [16:9] or...")
99 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Selecting Aspect Ratio of the Screen [Screen aspect] You can select the aspect ratio of the projecting screen. T T Press the [MENU] button when you finish. Display settings Screen aspect Select this when you use a screen with aspect ratio of 4:3. Select this when you use a screen with aspect ratio of 16:9. Select this when you use a screen with aspect ratio of 16:9 and you want to move the projecting position vertically. zIf you select [16:9] or...
Page 100
![Page 100
100
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality
Selecting an Image Mode
[Image mode]
You can select an image mode suitable for the
projecting image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Image adjustment
Image mode
Select this to project an image with
near-original quality and a high
regard for reproduction of white. It is
also suited to project moving pic-
tures such as a TV program or a
DVD movie in a bright room.
Select this to project an image with...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-99.png "Page 100
100
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality
Selecting an Image Mode
[Image mode]
You can select an image mode suitable for the
projecting image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Image adjustment
Image mode
Select this to project an image with
near-original quality and a high
regard for reproduction of white. It is
also suited to project moving pic-
tures such as a TV program or a
DVD movie in a bright room.
Select this to project an image with...")
100 SETTING UP FUNCTIONS FROM MENUS Setting the Image Quality Selecting an Image Mode [Image mode] You can select an image mode suitable for the projecting image. T T Press the [OK] button to confirm, and then press the [MENU] button. Image adjustment Image mode Select this to project an image with near-original quality and a high regard for reproduction of white. It is also suited to project moving pic- tures such as a TV program or a DVD movie in a bright room. Select this to project an image with...