Canon projector REALiS SX6 User Manual
Here you can view all the pages of manual Canon projector REALiS SX6 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
111
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P24, 25, 26).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-110.png "Page 111
111
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P24, 25, 26).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to...")
111 SETTING UP FUNCTIONS FROM MENUS Setting Various Function Turning On/Off the LED Illumination [LED illumination] You can turn on/off the LED illumination lamp and the LEDs on the terminals (P24, 25, 26). T T Press the [OK] button to confirm, and then press the [MENU] button. Setting up the Remote Control [Remote control] You can change the channel settings to prevent the two remote controls from interfering with each other when you use two projectors at the same time. T T T Press the [OK] button to...
Page 112
![Page 112
112
SETTING UP FUNCTIONS FROM MENUS
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Other...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-111.png "Page 112
112
SETTING UP FUNCTIONS FROM MENUS
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Other...")
112 SETTING UP FUNCTIONS FROM MENUS Setting up the Digital Video Input Signal [Digital video] You can select the standard of the digital video input signal. T T T Press the [OK] button to confirm, and then press the [MENU] button. Setting a Password [Password settings] You can set a password to the projector. Once you set the password, you will need to enter the password each time you turn on the projector. T T T Press the [OK] button to confirm, and then press the [MENU] button. System settings Other...
Page 113
![Page 113
113
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting to the Default Setting
[Factory defaults]...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-112.png "Page 113
113
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting to the Default Setting
[Factory defaults]...")
113 SETTING UP FUNCTIONS FROM MENUS Setting Various Function Registering a Password [Register password] You can register a password that you need to enter when turning on the projector. T T T Press the [OK] button to display the password entry screen. Enter a 4-digit password from the left. You can enter a value 1, 2, 3, and 4 by pressing [ ], [ ], [], respectively. Once you enter a value for all four digits, the password is regis- tered automatically. Resetting to the Default Setting [Factory defaults]...
Page 114
![Page 114
114
SETTING UP FUNCTIONS FROM MENUS
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
T
T
T
zIf the time of use is 1,400 hours
1,800 hours for SX7/X700
2,300 hours for SX60
zIf the time of use is 1,400 to 1,500 hours
1,800 to 2,000 hours for SX7/X700
2,400 to 2,500 hours for SX60
zIf the time of use is 1,500 hours or longer
2,000 hours or longer for SX7/X700
2,500 hours or longer for SX60zIf you replace the...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-113.png "Page 114
114
SETTING UP FUNCTIONS FROM MENUS
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
T
T
T
zIf the time of use is 1,400 hours
1,800 hours for SX7/X700
2,300 hours for SX60
zIf the time of use is 1,400 to 1,500 hours
1,800 to 2,000 hours for SX7/X700
2,400 to 2,500 hours for SX60
zIf the time of use is 1,500 hours or longer
2,000 hours or longer for SX7/X700
2,500 hours or longer for SX60zIf you replace the...")
114 SETTING UP FUNCTIONS FROM MENUS Resetting the Lamp Counter [Lamp counter] You can reset the lamp counter that indicates the timing to replace the projector when you replace it. T T T zIf the time of use is 1,400 hours 1,800 hours for SX7/X700 2,300 hours for SX60 zIf the time of use is 1,400 to 1,500 hours 1,800 to 2,000 hours for SX7/X700 2,400 to 2,500 hours for SX60 zIf the time of use is 1,500 hours or longer 2,000 hours or longer for SX7/X700 2,500 hours or longer for SX60zIf you replace the...
Page 115
Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index MAINTENANCE
Page 116
116 MAINTENANCE Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Wipe the projectors main unit softly with a soft cloth. If the projector is heavily soiled, soak the cloth in water with a small amount of detergent in it, squeeze the cloth very well, and then wipe the projector with it. After cleaning, wipe the projector with a dry cloth. Caution zThe main unit is very hot immediately...
Page 117
117 MAINTENANCE Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, the pro- jector may be damaged since it will block the air flow into the projector and raises the inter- nal temperature of the projector. Cleaning the Air Filter Turn the projector upside down, remove the cover by pushing the latch, remove the air fil- ter, and clean it...
Page 118
118 MAINTENANCE Replacing the Lamp When the time of use of the lamp exceeds 1,400 hours (1,800 hours or longer for SX7/ X700, 2,300 hours or longer for SX60), the following message (two types) is displayed for 10 seconds each time the projector is turned on. zWhen the time of use is 1,400 to 1,500 hours: 1,800 to 2,000 hours for SX7/X700 2,400 to 2,500 hours for SX60 zWhen the time of use is 1,500 hours or longer: 2,000 hours or longer for SX7/X700 2,500 hours or longer for SX60 Replacing Lamp This...
Page 119
119 MAINTENANCE Replacing the Lamp 1Turn off the projector, disconnect the power plug from the AC outlet, and then let the pro- jector stand for at least 1 hour. 2Loosen a screw with a flathead screwdriver and remove the lamp cover. 3Loosen two screws, pull up the handle, and then remove the lamp. 4Fully insert a new lamp and secure it with two screws. * After the installation, be sure to push down the handle. 5Replace the lamp cover and tighten the screw. 6Turn on the projector. 7Bring up the menu and...
Page 120
