Canon projector REALiS SX6 User Manual
Here you can view all the pages of manual Canon projector REALiS SX6 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
81 USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Pointing with a Spotlight XUseful when: XYou want to point to a portion of an image that should draw attendees attention. Highlight a desired portion of the projected image with a spotlight. Showing the Spotlight A spotlight appears at the center of the screen and the image becomes dark except for the spotlight. Press the button repeatedly to change the shape of the spotlight. Moving the Spotlight Move the spotlight to a desired position. zIf you...
Page 82
Page 83
Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index SETTING UP FUNCTIONS FROM MENUS
Page 84
84 SETTING UP FUNCTIONS FROM MENUS Setting Up Functions from Menus How to Use Menus Some of the projectors function are used through the menu screen. It consists of following three menus. * The menu items may differ depending on the input signal. The projector stores the settings for each input signal (8) and image mode (up to 5). Display settings menu (P88) This menu is used to select an input signal and make various settings related to display. System settings menu (P107) This menu is used to set...
Page 85
![Page 85
85
SETTING UP FUNCTIONS FROM MENUS
This section provides the basic operation on the menu.
1Press the [MENU] button.
A menu window appears.
2Press [] to select the appropriate tab.
Press [ ] to move the cursor on the tab if it is
not on it.
3Press [ ] / [ ] to select a menu item you want to set.
(Continue to the next page.)
zPress the [MENU] button again to close
the menu window.
zSome menu items provide more detailed
menu items.
Display settings
tabSystem settings
tab Image adjustment tab (Image...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-84.png "Page 85
85
SETTING UP FUNCTIONS FROM MENUS
This section provides the basic operation on the menu.
1Press the [MENU] button.
A menu window appears.
2Press [] to select the appropriate tab.
Press [ ] to move the cursor on the tab if it is
not on it.
3Press [ ] / [ ] to select a menu item you want to set.
(Continue to the next page.)
zPress the [MENU] button again to close
the menu window.
zSome menu items provide more detailed
menu items.
Display settings
tabSystem settings
tab Image adjustment tab (Image...")
85 SETTING UP FUNCTIONS FROM MENUS This section provides the basic operation on the menu. 1Press the [MENU] button. A menu window appears. 2Press [] to select the appropriate tab. Press [ ] to move the cursor on the tab if it is not on it. 3Press [ ] / [ ] to select a menu item you want to set. (Continue to the next page.) zPress the [MENU] button again to close the menu window. zSome menu items provide more detailed menu items. Display settings tabSystem settings tab Image adjustment tab (Image...
Page 86
![Page 86
86
SETTING UP FUNCTIONS FROM MENUS
4Set the menu item.
There are four types of menu items that you make a setting:
zDirectly
zFrom a list
zWith a slider
zIn a different screen
zDirectly
Example: Tracking
Press [] to increase/decrease the
setting.zFrom a list
Example: Aspect
Press the [OK] button to display a list.
Press [ ] [ ] to select a desired setting.
zWith a slider
Example: Contrast
Press [] to move the slider.zIn a different screen
Example: Menu position
Press the [OK] button to display a dif-...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-85.png "Page 86
86
SETTING UP FUNCTIONS FROM MENUS
4Set the menu item.
There are four types of menu items that you make a setting:
zDirectly
zFrom a list
zWith a slider
zIn a different screen
zDirectly
Example: Tracking
Press [] to increase/decrease the
setting.zFrom a list
Example: Aspect
Press the [OK] button to display a list.
Press [ ] [ ] to select a desired setting.
zWith a slider
Example: Contrast
Press [] to move the slider.zIn a different screen
Example: Menu position
Press the [OK] button to display a dif-...")
86 SETTING UP FUNCTIONS FROM MENUS 4Set the menu item. There are four types of menu items that you make a setting: zDirectly zFrom a list zWith a slider zIn a different screen zDirectly Example: Tracking Press [] to increase/decrease the setting.zFrom a list Example: Aspect Press the [OK] button to display a list. Press [ ] [ ] to select a desired setting. zWith a slider Example: Contrast Press [] to move the slider.zIn a different screen Example: Menu position Press the [OK] button to display a dif-...
Page 87
![Page 87
87
SETTING UP FUNCTIONS FROM MENUS
5Press the [OK] button.
In some menu items, the setting is enabled just by making a selection.
6Press the [MENU] button when you finish.
The menu disappears.](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-86.png "Page 87
87
SETTING UP FUNCTIONS FROM MENUS
5Press the [OK] button.
In some menu items, the setting is enabled just by making a selection.
6Press the [MENU] button when you finish.
The menu disappears.")
87 SETTING UP FUNCTIONS FROM MENUS 5Press the [OK] button. In some menu items, the setting is enabled just by making a selection. 6Press the [MENU] button when you finish. The menu disappears.
Page 88
![Page 88
88
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (1)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting a Screen Mode (2)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Display settings
Aspect
Projects a computer screen with
aspect ratio of 4:3 fully on the
screen with aspect ratio of 4:3.
Projects a computer...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-87.png "Page 88
88
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (1)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting a Screen Mode (2)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Display settings
Aspect
Projects a computer screen with
aspect ratio of 4:3 fully on the
screen with aspect ratio of 4:3.
Projects a computer...")
88 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Selecting a Screen Mode (1) [Aspect] You can adjust the aspect ratio of the image pro- jected on the screen. T T Press the [MENU] button when you finish. Selecting a Screen Mode (2) [Aspect] You can adjust the aspect ratio of the image pro- jected on the screen. T T Press the [MENU] button when you finish. Display settings Aspect Projects a computer screen with aspect ratio of 4:3 fully on the screen with aspect ratio of 4:3. Projects a computer...
Page 89
![Page 89
89
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (3)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (1)
[Input signal select]
You can select a desired input signal type if the
auto PC adjustment function detects more than
one input signal types.
T
T
Select an input signal type suitable for the com-
puter from the displayed signal types.
Press the [MENU] button...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-88.png "Page 89
89
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (3)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (1)
[Input signal select]
You can select a desired input signal type if the
auto PC adjustment function detects more than
one input signal types.
T
T
Select an input signal type suitable for the com-
puter from the displayed signal types.
Press the [MENU] button...")
89 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Selecting a Screen Mode (3) [Aspect] You can adjust the aspect ratio of the image pro- jected on the screen. T T Press the [MENU] button when you finish. Selecting an Input Signal Type (1) [Input signal select] You can select a desired input signal type if the auto PC adjustment function detects more than one input signal types. T T Select an input signal type suitable for the com- puter from the displayed signal types. Press the [MENU] button...
Page 90
![Page 90
90
SETTING UP FUNCTIONS FROM MENUS
Selecting an Input Signal Type (2)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly (irregular color or no image).
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (3)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly.
T
T
Press the [MENU] button when you finish.
Display...](http://img.usermanuals.tech/thumb/14/1328/w300_projector-realis-sx6-1478292841_d-89.png "Page 90
90
SETTING UP FUNCTIONS FROM MENUS
Selecting an Input Signal Type (2)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly (irregular color or no image).
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (3)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly.
T
T
Press the [MENU] button when you finish.
Display...")
90 SETTING UP FUNCTIONS FROM MENUS Selecting an Input Signal Type (2) [Input signal select] You can select an input signal type manually if a video image from a AV equipment is not pro- jected correctly (irregular color or no image). T T Press the [MENU] button when you finish. Selecting an Input Signal Type (3) [Input signal select] You can select an input signal type manually if a video image from a AV equipment is not pro- jected correctly. T T Press the [MENU] button when you finish. Display...