Canon projector LVS2 User Manual

31
VIDEO INPUT
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
SELECTING THE VIDEO SYSTEM
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to move the red
frame to AV SYSTEM Menu icon.
Press the POINT DOWN button to move the red arrow to the
system that you want to select and then press the SET button.
1
2
If projector cannot reproduce a proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,...

32
VIDEO INPUT
PICTURE IMAGE ADJUSTMENT
IMAGE LEVEL SELECT (MENU)
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button to move the red
frame to the IMAGE SELECT Menu icon.1
2Press the POINT DOWN button to move the red frame to the
level that you want to set and then press the SET button.
Move the red frame to the level
and press the SET button.
IMAGE SELECT MENU
IMAGE SELECT
Menu icon
IMAGE LEVEL SELECT (DIRECT)
Select the image level among Standard, Cinema, and...

33
VIDEO INPUT
Press the POINT LEFT/RIGHT but-
tons to adjust value.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button(s) to move the
red frame to the IMAGE ADJUST Menu icon.1
2Press the POINT DOWN button to move the red frame to the
item that you want to adjust and then press the SET button.  The
level of each item is displayed.  Adjust each level by pressing the
POINT LEFT/RIGHT button(s).
Move the red frame to the
item to be selected and then
press the SET...

34
VIDEO INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button(s) to move the
red frame to the SCREEN Menu icon.
Press the POINT DOWN button and move the red frame to the
function that you want to select and then press the SET button.
1
2
NOTE : The SCREEN Menu cannot be operated
when “720p,” “1035i,” or “1080i” is selected
on...

35
SETTING
Ceiling
When this function is “On,” the picture is top / bottom and left / right
reversed.  This function is used to project the image from a ceiling
mounted projector.
Rear
When this function is “On,” picture is left / right reversed.  This
function is used to project the image to a rear projection screen.
Ceiling function
Rear function
Keystone
When the image is distorted vertically, select Keystone.  The ON-
SCREEN MENU disappears and the Keystone dialog box is
displayed.  Correct the...

36
SETTING
This function turns the Projection Lamp off when this projector
detects signal interruption and is not used for a certain period in
order to reduce power consumption and maintain the Lamp-life.
(This projector is shipped with this function ON.)
Power Management function operates to turn the Projection Lamp off
when the input signal is interrupted and any button is not pressed
over 5 minutes.  This function operates as follows;
1. When any input signal is interrupted, “No signal” and the count...

37
APPENDIX
LAMP REPLACEMENT
LAMP REPLACE
When the life of the Projection Lamp of this projector draws to an end,
the LAMP REPLACE indicator lights yellow.  If this indicator lights
yellow, replace the projection lamp with a new one promptly.
Follow these steps to replace the lamp assembly.
LAMP
ASSEMBLY HANDLE LAMP COVER
ORDER REPLACEMENT LAMP
The Replacement Lamp can be ordered through your dealer.  When ordering a Projection Lamp, give the
following information to the dealer.

Model No. of your...

38
APPENDIX
LAMP REPLACE COUNTER
Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced.  When the Lamp Replace Counter is reset,
the LAMP REPLACE Indicator stops lighting.
NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
Turn the projector on, press the MENU button and the ON-
SCREEN MENU will appear.  Press the POINT LEFT/RIGHT
button(s) to move the red frame to the SETTING Menu icon
(refer to page 35, 36).
Press the POINT DOWN button to...

39
CLEANING PROJECTION LENS
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth.  Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.
When the projector is not in use, attach Lens Cover.
1
3
Lightly wipe a cleaning cloth over Projection Lens.2
Follow these steps to clean the Projection Lens:
MAINTENANCE
WARNING TEMP. INDICATOR
The WARNING TEMP. Indicator flashes red when the internal temperature of the projector...

40
APPENDIX
TROUBLESHOOTING
Before calling your dealer or service center for assistance, check the following:
1. Make sure you have connected a projector to your computer or video equipment as described in the section
CONNECTING THE PROJECTOR  on pages 11 ~ 13.
2. Check cable connection.  Verify that all computer, video and power cord are properly connected.
3. Verify that all power is switched on.
4. If a projector still does not produce an image, re-start your computer.
5. If an image still does not...