Canon printer PIXMA SELPHY ES2 User Manual

							
Making Printer Settings
81Appendix
Language
1Press   to select the [Printer Setup].
2Select [Language] and press  .
• The language selection screen is displayed.
3Press  ,  ,   or   to select the language you wish to set and 
press .
• The selected language is set and the display returns to [Printer Setup].
1• For how to use the menu, refer to page 78.
• When no memory card is inserted, or when no camera or computer is connected to the printer, 
press and hold down   and then press   to shortcut to the language set up 
screen. Select the language and press  .The language is set and the display returns to the 
standby screen.  
						

							
82Appendix
Cleaning the Printer
Cleaning the Inside of the Printer
Remove dust on the head of the cartridge with the supplied cleaner unit.
1Remove the cartridge (p. 20).
2Insert the cleaner unit in the cartridge compartment and push it in 
completely and slide it in and out 2 or 3 times.
Cleaning the Printer Casing
Wipe the casing with a soft dry cloth.
Cleaning the Back of the Printer
Clean the dust from the air vents on the back. Dust will get on the ink sheet if it enters from the air 
vents, preventing the printer from printing cleanly. If dust becomes lodged on the ink sheet, use a 
blower brush to remove it so that you do not touch the ink sheet.
• Do not touch white parts of the cleaner as its performance may be affected.
• Never use volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They may  cause deformation or peeling of the printers casing.
Arrow side facing up  
						

							
83Appendix
Storing the Printer or the Printed Paper
Storing the Printer
Unplug the power cord from the power outlet (If using the battery pack, remove it).
Remove the cartridge from the printer and store it in its original package.
Storing Prints
• Avoid storing prints in the following places to prevent image quality from deteriorating.
- Places with high temperatures (40°C/104°F or higher).
- Places with high humidity or dusty areas.
- Places subject to direct sunlight.
• Please avoid the following actions as they ma y result in color change, color fading or color 
bleeding.
- Sticking any type of adhesive tape on a print surface.
- Allowing print surfaces to come into contact with vinyl or plastic.
- Applying alcohol or other volatile solvents to a print surface.
- Leaving print surfaces tightly pressed agains t other surfaces or objects for prolonged 
periods.
• If you wish to mount prints in an album, select an album with photo covers made of nylon,  polypropylene or cellophane.
Carrying the Printer
When carrying the printer, lift the carrying handle up. We recommend carrying the printer with the 
cleaner unit inserted.
• Color change may occur over time in accordance with conditions of storage. Canon assumes no liability for color changes.
• Close the print receptacle cover. If dirt or foreign objects enter the printer, print quality may  deteriorate.  
						

							
84Appendix
Safety Precautions
Use this equipment correctly according to the following precautions to avoid the risk of injury, fire, 
electrical shock, malfunction or other hazards. Please also be sure to read Handling Precautions. 
Equipment refers to the printer and compact power adapter.
The safety precautions noted on the following pages  are intended to instruct you in the safe and 
correct operation of the printer to prevent inju ries or damage to yourself or other persons.
Equipment
WARNING
Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-
ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer from hearing loss from listening with 
headphones to the loud sounds of a CD-ROM played on a music CD player.
WARNING
Store the equipment in a place where it cannot be reached by children.
Do not disassemble or modify the equipment.
If the equipment is dropped or the casing becomes damaged, do not continue operation.
Stop operating the equipment immediately if it emits smoke or noxious fumes.
Do not allow water or other liquids to enter the interior of the equipment.
If the equipment is subjected to water droplets or damp salty air, gently wipe it with a soft, 
absorbent cloth.
Do not insert or drop metallic objects or flammable substances into the equipment interior.  Immediately switch off the printer power and remove the power cord from the power outlet. (If 
powering it by battery, remove the battery.)
Do not touch metal parts of devices or the power plug during thunderstorms. Immediately stop using the equipment and distance yourself from it.
Do not use flammable solvents such as alcohol, benzine, or paint thinner to clean the 
equipment.
Do not rest heavy objects on the power cord or plug, pull on it with excessive force or 
damage it.
Do not use a power source (compact power adapter, battery) that is not specified for the 
equipment.
Remove the power cord on a regular periodic basis and wipe away the dust and dirt that 
collects on the plug, the exterior of the power outlet and the surrounding area.  
						

							
Safety Precautions
85Appendix
Battery (SELPHY ES2 only)
Do not handle the power cord if your hands are wet.
CAUTIONS
Do not stick any part of your hand into the printer interior.
Do not use or store the equipment in the following types of places.Humid or dusty areas, places subj ect to heavy vibrations, places near flames, places subject to 
strong sunlight, or hot places such  as an automobile trunk or dashboard. 
Do not attach metallic pins or allow dirt to collect on the power plug or recharging 
connectors.
Do not excessively pull or bend the power cord.
Do not use the compact power adapter for any other equipment except this printer, use it 
beyond its rated capacity or voltage, or leave the plug partially inserted into a power outlet.
Do not open the cartridge cover during printing. • If you do so, printing will stop. 
• Paper moves back and forth in the printer during printing. Placing your hand in the way of the moving paper may result in injury.
Unplug the equipment when you are not using it. Leaving the equipment plugged in during prolonged per iods of non-use poses risk of electric 
shock or fire.
WARNING
Do not place the battery pack near a heat source or expose it to direct flame or heat.
The battery pack should not  be immersed in water.
Do not attempt to disassemble, alter or apply heat to the battery pack.
Avoid dropping or subjecting the battery pack to severe impacts that could damage the 
casing.
Use only recommended battery pack and accessories. There is a risk of the battery exploding or leaki ng. In the event that a battery leaks and the eyes, 
mouth, skin or clothing contact these leaked substances, immediately flush with water.
When you are not using the printer, remove the battery and store it properly.  
						

							
Safety Precautions
86Appendix
Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the 
battery charger while it is charging.There is a risk of heat generation or deformation if it is left connected for a long period of time.
Before you discard a battery, cover the terminals with tape or other insulators to prevent 
direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or 
explosions.
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. 
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.  
						

							
87Appendix
Handling Precautions
For the handling of memory cards, cameras, or computers, refer to the supplied users manual of 
each product.
Warning Against Copyright Infringement
Please respect all copyrights. Use of images produced by SELPHY ES2 or ES20 for purposes 
other than personal entertainment may be prohibited by law.
Warranty Limitations
This printers warranty is only effective in the count ry of sale. If a problem arises while the printer 
is in use abroad, please convey  it back to the country of sale before proceeding with a warranty 
claim to a Canon Customer Support center.
Printer
Please avoid turning the printers power on and off needlessly as the printer initialization 
consumes ink.
There may not be enough ink left for the allotted sheets in the set.
Never use volatile compounds or insecticides on  the printer, and do not allow rubber or 
vinyl material to remain in prolonged contact with the printer.
These materials may cause deformation of the printers casing.
If the printer overheats, it will temporarily stop operating. This does not mean that the 
printer has malfunctioned.
The printer will resume normal printing as soon as it cools down. Temporary stoppages are most likely to occur in the following cases:- When printing continuously.
- If a room is unusually warm.
- If the air vents on the back of the printer  are blocked or if ventilation is inadequate.
The carrying handle will snap back itself. Be careful not to catch a finger in it.  
						

							
Handling Precautions
88Appendix
If the print receptacle cover comes off, tilt the cover to LCD monitor side ( ) align the tip 
of the spring on the left side of the cover with the groove on the printer ( ) , and then 
insert the shaft on the right side of the cover into the printer ( ).If the print receptacle cover is not attached dur ing printing, paper that is finished printing may 
become jammed inside the printer.
Do not insert foreign objects into the print receptacle. zTo prevent malfunctions and damage caused by electromagnetic fields
Never position the equipment close to motors  or other devices that generate strong 
electromagnetic fields. Moreover, do not  use near televisions or AM radio.
z To prevent condensation
You can avoid condensation by placing the equi pment in an airtight, sealable plastic bag and 
allow for adjustment to temperature chang es gradually before removing from the bag. 
In the event that condensation does form within the equipment, keep it at room temperature 
until the water droplets evaporate naturally before use.  
						

							
89Appendix
Specification
All data is measured according to standard Canon testing procedures. We reserve the right to 
change specifications without notice.
Compact Photo Printer SELPHY ES2/ES20
Printing Method Dye-sublimation thermal transfer (with overcoating)
Print Resolution 300 x 600 dpi
(300 x 300 dpi : When a PC is c onnected, 2-up and higher layout 
or Creative Print is selected)
Gradation 128 shades per color (300 x 600 dpi)
256 shades per color (300 x 300 dpi)
Ink Dedicated ink and paper integrated cartridge
Color (Y, M, C and overcoating)
Black & White (Black & White and overcoating, Postcard size 
only)
Paper Dedicated paper (Postcard size, L size, Card size (including full-
sized label sheet ))
Print size Borderless Bordered
Postcard size 100.0 x 148.0 mm
(3.9 x 5.8 in.) 91.0 x 121.9 mm
(3.6 x 4.8 in.)
L size 89.0 x 119.0 mm
(3.5 x 4.7 in.) 78.2 x 104.9 mm
(3.1 x 4.1 in.)
Card size 54.0 x 86.0 mm
(2.1 x 3.4 in.) 49.5 x 66.0 mm
(2.0 x 2.6 in.)
Printing Speed Printing from Memory Cards  Connected to Cameras
*1
Postcard sizeApprox. 1 min. 9 sec. Approx. 1 min. 9 sec.
L size Approx. 1 min. 1 sec. Approx. 1 min. 1 sec.
Card size Approx. 53 sec. Approx. 53 sec.
Feeding system Automatic paper feed from the cartridge
Ejection system Automatic paper ejection to the print receptacle on top of the 
printer (Message is displayed  when the receptacle is full.)
LCD monitor TFT color LCD (ES2: 3.0-inch type with tilt-up /
 ES20: 2.5-inch type)  
						

							
Specification
90Appendix
Compact Power Adapter CA-ES100 
InterfaceUSB Connecting to PictBridge compliant devices/a Canon Direct Print 
compliant camera: USB compliant Type A connector
Connecting to a PC: USB compliant Type B connector
Wireless IrDA
*2 (Print Beam) (SELPHY ES2 only)/Bluetooth (Print Beam)*3
Memory CardsSD Memory Card, miniSD Card, microSD Card*4, SDHC Memory 
Card, miniSDHC Card, microSDHC Card*4, MultiMediaCard, 
MMCplus Card, HC MMCplus Card, MMCmobile Card*4,
MMCmicro Card*4, RS-MMC Card*4, CF (CompactFlash) Card, 
Microdrive, xD-Picture Card*4, Memory Stick,
Memory Stick PRO, Memory Stick Duo, Memory Stick
PRO Duo, Memory Stick micro
*4
Operating Temperatures 5 - 40 °C (41 - 104 °F)
Operating Humidity 20 - 80%
Power Source Compact Power Adapter CA-ES 100
Power Consumption 70 W or less (4 W or less on standby)
Dimensions 213.4 x 189.6 x 130.9 mm (8.4 x 7.5 x 5.2 in.)
Weight (printer only) ES2: Approx. 1955g (69.0 oz.)  / ES20: Approx. 1865g (65.8 oz.)
*1 When connected to a Canon digital camera equipped with DIGIC lll.
*2 IrSimple is not supported.
*3 Bluetooth Unit BU-20 sold separately is required.
*4 Specialized adapter is required. 
Rated InputAC 100 - 240 V (50/60 Hz)
1.2 A (100 V) - 0.6 A (240 V)
Rated Output DC24 V, 2.3 A
Operating Temperature 0 - 40 °C (32 - 104 °F)
Dimensions 134.0 x 67.5 x 34.0 mm (5.3 x 2.7 x 1.3 in.) (excluding cable)
Weight Approx. 295 g (10.4 oz.)