Canon printer PIXMA SELPHY ES2 User Manual
Have a look at the manual Canon printer PIXMA SELPHY ES2 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Print Settings 51Printing from Memory Cards My Colors * If an image contains the colors of human skin, these colors will also be changed. Skin color effects are sometimes not produced depending on the color of the skin. Off ( ) The image is printed out without the My Colors function applied. Vivid Contrast and color depth are enhanced to produce strong hues. Neutral Contrast and color depth are suppressed to produce subdued hues. Sepia Images are printed out in sepia tone. B/W Images are printed out in black and white. Positive Film This setting makes red, green or blue colors more intense, similar to the [Vivid Red], [Vivid Green] or [Vivid Bl ue] effects. It produces intense, yet natural-looking colors, such as those obtained with positive film. Lighter Skin *Skin tones are reproduced in a lighter tone. Darker Skin *Skin tones are reprod uced in a darker tone. Vivid Blue The color blue is enhanced. This is good for printing subjects containing lots of blue, such as sky and sea, more vividly. Vivid Green The color green is enhanced. This is good for printing subjects containing lots of green, such as mountains, new growth, flowering plants and lawns, more vividly. Vivid Red The color red is enhanced. This is good for printing subjects containing lots of red, such as red flowers and cars, more vividly.
52Printing from Camera Printing from Camera Print from camera supporting (PictBridge) or (Direct Print) by connecting it to the printer with a USB cable. PictBridge is an industry standard that allows any digital camera or video camera, regardless of the manufacturer or model, to print images taken with the camera directly to a printer without using a computer. • Make sure that a memory card is not inserted in the printer, or that no computer is connected to the printer before connecting a camera. • Make sure that the camera is PictBridge or Direct Print compliant. • Use the interface cable (USB cable) supplied with the camera to connect to the printer. • Ensure the cameras communication settings are configured correctly. • Set the print setup with the camera. • For camera handling details, refer to the camera user’s guide.
53Printing from Camera Printing Images When Connected with Camera This guide explains the procedure for printing with a Canon digital camera connected as an example. 1Open the terminal cover. 2Connect a camera to the printers USB terminal for camera connection with the interface cable supplied with the camera. Communication Settings for Camera Depending on the model of the camera, it may be necessary to change the communication settings prior to connecting the camera to the printer. For EOS 5D, EOS 10D, EOS 20D, EOS 30D, EOS 300D/DIGITAL Rebel and EOS 350D/ DIGITAL Rebel XT cameras, set [Communication] in the cameras menu to [PTP], or [Print/PTP] or [Print/PC]. See the user guide supplied with the camera for details.
Printing Images When Connected with Camera 54Printing from Camera 3Press until the power lamp lights green to turn on the power. 4Turn the cameras power on to display an image. 5Select the desired image to print with the camera. 6Press (Print/Share Button). • Printing starts.• Camera Direct screen is displayed on the LCD monitor of the printer. • The (PictBridge) or the (Direct Print) icon is displayed on the LCD monitor of the camera. 4• The power button lights steadily green once it is ready to print. • The power lamp of the printer blinks or lights red if any error occurs while connecting or printing. A message is then displayed on the LCD monitor which may differ depending on the model of the camera. • Before you disconnect the USB cable, turn the printers power off. • If the (Direct Print) icon is displayed on the LCD monitor of the camera, the black and white cartridge (Easy Photo Pack E-P25BW) cannot be used. 6• If the camera does not feature the button, perform the printing procedure with the camera. • The camera returns to the playback screen once printing is successfully completed. • Printing cannot be canceled with on the printer while printing with a camera connected. Operate the camera to cancel printing. • If printing does not start, check the cameras LCD monitor for any messages (p. 96). • The setting of date, print copies, or layout is available with Canon camera (This may not apply to some models, however). For more details, see the Camera Users Guide supplied with the camera.
55Printing from a Mobile Phone (Wireless Printing) Printing from a Mobile Phone (Wireless Printing) Transmit and print out images shot with a camera-equipped mobile phone supporting infrared data communication (SELPHY ES2 only) or Bluetooth. • Do not insert a memory card or connect a camera or computer to the printer during wireless printing. • You cannot print via wireless connection between the printer and a computer. • Only image data files up to 3 MB can be sent (maximum data size varies depending on the mobile phone). • Data transmission time increases when data size is large. Accordingly, it may take some time before printing starts. • E-mail and phone directories cannot be printed. • Downloaded contents or image data, for example, downloaded from a URL attached to mail may not be printable due to the security settings on the mobile phone. • Movies cannot be printed. • The printer may not be able to print images saved onto the memory card of certain mobile phones. • The position and orientation (horizontal or vertical) of images for printing is set automatically by the printer. Since images are enlarged or reduced to fit the paper size, the edges of the image may be cropped with certain combinations of image and paper sizes. • IrSimple is not supported. • See the user’s manual of your mobile phone for information on how to use its wireless functions.
56Printing from a Mobile Phone (Wireless Printing) Infrared (IrDA) Wireless Printing (SELPHY ES2 only) Print images transmitted from a mobile phone supporting infrared data communication (IrDA). z The mobile phone must have the following features. • Infrared data communication (infrared data communication port supporting IrDA) • Built-in camera capable of recording and saving JPEG images. 1Check that no memory cards are inserted in the printer, no Bluetooth unit is attached, and the camera is not connected via USB cable. 2Press to turn the printers power on until the power lamp lights green. 3Transmit an image from your mobile phone to the printer. • Printing starts after data transmission is completed. 3• Printing is done according to the setting value specified in [Print Settings]. Setting of each item must be done in advance (p. 46). • During transmission, the power lamp blinks green. If transmission is interrupted, the power lamp stops blinking and lights green. Check the message appearing on the mobile phone display if an error occurs. • Printing cannot be canceled by pressing during infrared printing. • If the transfer is not working well, reposition the mobile phone closer and directly in front of the infrared data receiver and reinitiate the transfer. • Note that the distance over which infrared signals can be transmitted and received varies according to the mobile phone model. For details on connection, refer to your mobile phones manual. Within 20 cm (7.9 in.) (Do not place objects within this range.) Effective range Approx. 10 degrees (both top or bottom and left or right)
57Printing from a Mobile Phone (Wireless Printing) Printing via Bluetooth By installing Bluetooth Unit BU-20 (sold separately) on the printer you can print images by transmitting data from a Bluetooth-enabled mobile phone. z The mobile phone must have the following features. • Built-in Bluetooth and profiles compatible with OPP (Object Push Profile) or BIP (Basic Imaging Profile). For details on compatible profiles, refer to the user manual of the mobile phone. • A built-in camera capable of recording and saving JPEG images. 1Check that no memory cards are inserted in the printer, and that no camera is connected to the printer via USB cable. 2Install Bluetooth Unit BU-20, sold separately. 3Press to turn the printers power on until the power lamp lights green. 4Make the Bluetooth settings. • For details on Bluetooth settings, refer to Bluetooth Settings in Printer Setup Menu (p. 79).
Printing via Bluetooth 58Printing from a Mobile Phone (Wireless Printing) 5Transmit an image from your mobile phone to the printer. • Printing starts after data transmission is completed. 5• Bluetooth Unit blinks blue during transmission. If data transfer is interrupted, the blinking will stop. Check the message appearing on the mobile phone display if an error occurs. • Printing cannot be canceled by pressing during Bluetooth printing. • For details on how to send or make Bluetooth connection, refer to the Bluetooth manual. • Maximum communication distance is approx.10 m (approx. 33 ft.). However, the following conditions sometimes cause this distance or printing speed to change: - Obstacles or radio wave conditions between communication devices - Sites where magnetic fields, static electricity or radio wave interference is generated - Reception sensitivity and antenna performance of the communication devices Up to approx. 10 m (33 ft.)
59Printing from a PC Printing from a PC Print from a computer connected to the printer. • Make sure that a memory card is not inserted in the printer, or that no camera is connected to the printer before connecting a computer. • When using the USB cable, be sure to connect the printer directly to your computer. If you connect the USB cable to a USB hub, the printer may not function properly. • The printer may not function properly if other USB devices (with the exception of a USB mouse or USB keyboard) are used at the same time as the printer. Disconnect any other USB devices from your computer and then reconnect the printer. • Do not put your computer into the standby mode (or sleep mode) while the printer is connected to a USB port. If you accidentally do so, do not disconnect the USB cable from your computer while it is in standby mode. • Do not connect the computer to the printer before installing the printer driver. Follow the instructions of this guide. • You must login to the computer as an administrator before beginning installation. • For details on how to use the computer, refer to the computers manual.
60Printing from a PC System Requirements Install the software on a computer meeting the following minimum requirements. Windows OSWindows Vista Windows XP Service Pack 2 Windows 2000 Service Pack 4 Configuration The above OS should be pre-installed on computers with built- in USB ports. CPU Windows Vista: Pentium 1.3 GHz or higher processor Windows XP/Windows 2000: Pentium 500 MHz or higher processor RAM Windows Vista: 512 MB or more Windows XP/Windows 2000: 256 MB or more Interface USB Free Hard Disk Space Canon Utility • ZoomBrowser EX: 200 MB or more Ulead Photo Express LE: 300 MB or more Canon SELPHY Printer Driver: 4 MB or more (the amount of free space required for installation) Display 1,024 x 768 pixels or more High Color (16 bit) or better