Canon printer PIXMA MG6620 User Manual

1689Cause
Printer detected ink out condition (The lamp on the ink tank flashes).
Action Replace the ink tank and close the operation panel.
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the machine.
If you want to continue printing, you need to release the function for detecting the remaining ink level. To release this function, press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the...

1700Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.902 

1701Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.903 

1712Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.904 

1713Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.905 

1714Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.906 

1715Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.907 

1871Cause
The cassette is not inserted.
Action Close the paper output tray, push the cassette so that the 
 mark on the cassette aligns with the  mark
on the machine.
Open the paper output tray, then tap  OK on the touch screen of the machine.
Note
•
The cassette paper information registration screen is displayed after inserting the cassette. Register
the cassette paper information according to the paper you loaded in the cassette.
•
If you want to cancel printing, press the machine's  Stop button.
908 

1890Cause
The protective material for the print head holder or the tape may remain attached to the holder.
Action Open the operation panel, then confirm that the protective material or the tape does not remain attachedto the print head holder.
If you find the protective material or the tape remains attached, remove it, then close the operation panel.
If the problem is not resolved, contact the service center.
909 

2110Cause
The paper settings for printing or copying are different from the cassette paper information registered to
the machine.
Note
•
For details on the proper combination of paper settings you can specify by the printer driver or on the touch screen:
Setting the Media Type with the Printer Driver and on the Printer  (Windows)
Setting the Media Type with the Printer Driver and on the Printer  (Mac)
Setting the Paper Size with the Printer Driver and on the Printer (Windows)
Setting the Paper Size with...