Canon printer PIXMA MG6620 User Manual

1411Cause
The ink tank cannot be recognized.
ActionOpen the operation panel and replace the ink tank which lamp is off.891 

1412Cause
The ink tank cannot be recognized.
ActionOpen the operation panel and replace the ink tank which lamp is off.892 

1413Cause
The ink tank cannot be recognized.
ActionOpen the operation panel and replace the ink tank which lamp is off.893 

1414Cause
The ink tank cannot be recognized.
ActionOpen the operation panel and replace the ink tank which lamp is off.894 

1600Cause
If the lamp on the ink tank is flashing, ink may have run out.
Action Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, tap  OK on the machine with the ink tank
installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
machine may be damaged if printing is continued under the ink out condition.
Note
•
If multiple ink lamps are flashing red, check the status of each ink tank.
895 

1660Cause
The ink tank is not installed.
Action
Install the ink tank.896 

1680Cause
Some ink tanks are not installed in the correct position. (The lamp on the ink tank flashes.)
Action Confirm that the ink tanks are installed in the appropriate positions.897 

1681Cause
More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.)
Action Confirm that the ink tanks are installed in the appropriate positions.898 

1684Cause
The ink tank cannot be recognized.
ActionPrinting cannot be executed because the ink tank may not be installed properly or may not be compatible
with this machine.
Install the appropriate ink tank.
If you want to cancel printing, press the machine's  Stop button.899 

1688Cause
The ink has run out. (The lamp on the ink tank flashes.)
ActionReplace the ink tank and close the operation panel.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be...