Canon printer PIXMA MG6620 User Manual

Insert the following types of memory cards into the lower card slot:
•
SD Secure Digital memory card, SDHC memory card
•
miniSD Card, miniSDHC Card
•
microSD Card, microSDHC Card
Important
•
Part of the memory card will protrude from the card slot, but do not force it into the slot any further.This can damage the machine or the memory card.
•
Make sure that the memory card is correctly oriented before inserting it into the card slot. If you
force the memory card into the card slot in the wrong...

Removing the Memory Card
Important
•
If you used the card slot as the memory card drive of a computer, you must perform the "safe removal"operation on your computer before physically removing the memory card from the machine.
Setting Up the Card Slot as the Memory Card Drive of the Computer
1.
Make sure that the  Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from the machine.
Important
•
Do not remove the memory...

Replacing an Ink Tank
Replacing an Ink Tank
Checking the Ink Status
183 

Replacing an Ink TankWhen remaining ink cautions or errors occur, the message will appear on the touch screen to inform you ofthe error. Take appropriate action according to the message.
A Message Is Displayed
Note
•
If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance
Procedure .
Replacing Procedure
When you need to replace an ink tank, follow the procedure below.
Important
•
If you remove an ink tank, replace it immediately. Do not leave the machine with...

Open the operation panel (A) until it stops.The print head holder moves to the replacement position.
Caution
•
Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder until it stops completely.
Important
•
When opening or closing the operation panel, do not touch the buttons and touch screen on the
operation panel. Doing so may result in an unexpected operation.
•
Do not touch the metallic parts or other parts inside the machine.
•
If the operation panel is left...

5.Prepare a new ink tank.1.
Take a new ink tank out of its package, remove the orange tape () completely, then
remove the protective film (
) completely.
Important
•
Handle an ink tank carefully. Do not drop or apply excessive pressure to it.
•
If the orange tape remains on the Y-shape air hole (D), ink may splash or the machine may not
print properly.
2.
Hold the ink tank with the orange protective cap (E) pointing up while being careful not to
block the Y-shape air hole (D).
3.
Lift up the tab on the...

Important
•
Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air
hole (D) blocked, ink may splash.
•
Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may stain your hands if you touch them.
•
Do not reattach the protective cap (E) once you have removed it. Discard it according to the locallaws and regulations regarding disposal of consumables.
6.
Install the new ink tank.
1.
Insert the front end of the ink tank into...

Important
•
You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the print head holder.
•
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
7.
Close the operation panel gently.
Caution
•
When closing the operation panel, be careful not to get your fingers caught.
Important
•
When opening or closing the operation panel, do not touch the buttons and touch screen on...

Checking the Ink Status
Checking the Ink Status with the Touch Screen on the Machine
Checking the Ink Status with the Ink Lamps
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
189 

Checking the Ink Status with the Touch Screen on the Machine1.
Make sure that the power is turned on, and display the HOME screen.
If the HOME screen is not displayed, press the  HOME button to display it.
2.
Flick the HOME screen, then tap  Setup .
Using the Operation Panel
The setup menu screen will appear.
3.
Tap   Estimated ink levels .
A symbol appears in the area (A) if there is any information about the remaining ink level.
Example: 
Ink tank is running low. Prepare a new ink tank.
Note
•
The...