Canon printer PIXMA MG6620 User Manual
Here you can view all the pages of manual Canon printer PIXMA MG6620 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 151
Loading Plain Paper / Photo PaperYou can load plain paper or photo paper. Important • If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial print, it can cause paper jams. Note • We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Media Types You Can Use . • You can use general copy paper. For the page size and paper weight you can use for this machine, see Media Types You Can Use...
Page 152
2. Holding the right tab on the front cover, pull out the cassette until it stops. 3. Use the right paper guide (A) to slide both paper guides all the way out. 4. Load the paper in the center of the cassette WITH THE PRINT SIDE FACING DOWN. Push the paper stack all the way to the back of the cassette. Important • Always load paper in the portrait orientation (B). Loading paper in the landscape orientation (C) can cause paper jams. 152
Page 153
5. Slide the right paper guide (A) to align the paper guides with both sides of the paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly. Note • Do not load sheets of paper higher than the load limit mark (D). • Keep the paper stack height below the tabs (E) of the paper guides. • Load small size paper, such as 4" x 6" (10 x 15 cm), by pushing it in all the way to the back of the cassette. 153
Page 154
6.Holding the right tab on the front cover, push the cassette back until the arrow () on the front cover is aligned with the arrow ( ) on the machine. After pushing the cassette back, the paper information registration screen is displayed on the touch screen. 7. Select the size and type of the loaded paper in the cassette at Page size and Type , then tap OK . If a message is displayed on the screen, follow the directions in the message to complete registration. Paper setting for Printing 3. Open the...
Page 155
Important • Be sure to open the paper output tray when printing. If not open, the machine cannot start printing. Note • When printing, select the size and type of the loaded paper on the print settings screen of the operation panel or printer driver. 155
Page 156
Loading EnvelopesYou can load Envelope DL and Envelope Com 10. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from the operation panel or from a digital camera is not supported. • Do not use the following envelopes. They could jam in the machine or cause the machine to malfunction. • Envelopes with an embossed or treated surface • Envelopes with a double flap • Envelopes whose...
Page 157
2. Holding the right tab on the front cover, pull out the cassette until it stops. 3. Use the right paper guide (A) to slide both paper guides all the way out. 4. Load the envelopes in the center of the cassette WITH THE ADDRESS SIDE FACINGDOWN. The folded flap of the envelope will be faced up on the left side. (B) Rear side (C) Address side Push the envelopes all the way to the back of the cassette. Up to 5 envelopes can be loaded at once. 157
Page 158
5. Slide the right paper guide (A) to align the paper guides with both sides of the envelopes. Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly. Note • Do not load envelopes higher than the load limit mark (D). • Keep the envelope stack height below the tabs (E) of the paper guides. 6. Holding the right tab on the front cover, push the cassette back until the arrow () on the front cover is aligned with the arrow ( ) on the machine. After pushing the...
Page 159
7. Select the size and type of the loaded envelopes in the cassette at Page size and Type , then tap OK. Paper setting for Printing 3. Open the paper output tray. 1. Extend the paper support (F), then open the output tray extension (G). 2. Open the paper output tray (H) gently, then extend the paper output support (I). 159
Page 160
Important • Be sure to open the paper output tray when printing. If not open, the machine cannot start printing. Note • When printing, select the size and type of the loaded envelopes on the print settings screen of theprinter driver. 160