Canon printer PIXMA MG6620 User Manual

Main Components and Basic Operations
Main Components
About the Power Supply of the Machine
Using the Operation Panel
131 

Main Components
Front View
Rear View
Inside View
Operation Panel
132 

Front View
(1) operation panelUse to change the settings of the machine or to operate it. Also, lift and open it to replace an ink tank, to
check the ink lamp, or to remove jammed paper inside the machine.
Operation Panel
(2) document cover Open to load an original on the platen glass.
(3) paper guides Align with both sides of the paper stack.
(4) cassette Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time....

(10) card slotInsert a memory card.
Before Inserting the Memory Card
(11) Access lamp Lights or flashes to indicate the memory card status.
Inserting the Memory Card
(12) platen glass Load an original here.
134 

Rear View
(1) transport unitOpen to remove jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) USB port Plug in the USB cable to connect the machine with a computer.
Important
•
Do not touch the metal casing.
•
Do not plug in or unplug the USB cable while the machine is printing or scanning originals with thecomputer.
135 

Inside View
(1) ink lampsLights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(2) print head holder The print head is pre-installed.
Note
•
For details on replacing an ink tank, see Replacing an Ink Tank .
136 

Operation Panel* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
(1) ON button/POWER lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on the
power, make sure that the document cover is closed.
Turning the Machine On and Off
(2) HOME button Used to display the HOME screen.
Using the Operation Panel
(3) touch screen Displays messages, menu items, and the operational status. Directly touch the screen lightly with...

Flashes:Printing or scanning over wireless LAN. Also flashes while configuring the wireless LANconnection.
138 

About the Power Supply of the Machine
Confirming that the Power Is On
Turning the Machine On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
139 

Confirming that the Power Is OnThe  POWER  lamp is lit when the machine is turned on.
Even if the touch screen is off, if the  POWER lamp is lit, the machine is on.
Note
•
It may take a while for the machine to start printing immediately after you turn on the machine.
•
The touch screen display will turn off if the machine is not operated for about 5 minutes. To restore the
display, press any button except the  ON button or touch the touch screen. The print operation from a
computer can also restore the...