Canon printer PIXMA MG3620 User Manual

1485Cause
Appropriate ink cartridge is not installed.
What to Do Printing cannot be executed because the ink cartridge is not compatible with this machine.
Install the appropriate ink cartridge.
If you want to cancel printing, press the machine's  Stop button.
841 

1486Cause
FINE cartridge is not installed in correct position.
What to Do
Make sure each FINE cartridge is installed in the correct position.
842 

1487Cause
FINE cartridge is not installed in correct position.
What to Do
Make sure each FINE cartridge is installed in the correct position.
843 

1682Cause
FINE cartridge cannot be recognized.
What to Do Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact your nearest Canon service
center to request a repair.
844 

1684Cause
The ink cartridge cannot be recognized.
What to Do Printing cannot be executed because the ink cartridge may not be installed properly or may not be
compatible with this machine.
Install the appropriate ink cartridge.
If you want to cancel printing, press the machine's  Stop button.
845 

1686Cause
The ink may have run out.
What to DoThe function for detecting the remaining ink level will be disabled since the ink level cannot be correctly
detected.
If you want to continue printing without this function, press the machine's  Stop button for at least 5
seconds.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out...

1687Cause
The FINE cartridge is not installed properly.
What to Do
Open the paper output cover. When the head cover opens, push up the ink cartridge lock lever to make
sure the FINE cartridges are installed properly.
After that, close the paper output cover.
If the error is not resolved, remove the FINE cartridges and install them again.
847 

1688Cause
The ink has run out.
What to DoReplace the ink cartridge and close the paper output cover.
If printing is in progress and you want to continue printing, press the machine's  Stop button for at least 5
seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
The function for detecting the remaining ink level will be disabled.
Replace the empty ink cartridge immediately after the printing. The resulting print quality is not
satisfactory, if printing is...

1702Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
849 

1703Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
850