Canon printer PIXMA MG3620 User Manual

2103Cause
Machine cannot detect paper size.
What to DoPress the machine's  Stop button and try to print again.
If this error still occurs even after printing again, set the machine not to detect the paper width by using the
operation panel, the printer driver, or  Remote UI.
Note

2900Cause
Scanning print head alignment sheet failed.
What to Do
Press the machine's  Black or Color  button. Check the following points, perform automatic print head
alignment again.

2901Cause
Print head alignment pattern has been printed and machine is waiting to scan sheet.
What to Do Scan the printed alignment pattern.1.
Load print head alignment sheet on platen glass.
Place the printed side down and align the mark 
 in the upper left corner of the sheet with the
alignment mark 
.
2.
Slowly close the document cover and press machine's  Black or Color  button.
The machine starts scanning the print head alignment sheet, and automatically adjusts the print head position.
863 

3402Cause
Machine could not make copies because its memory is full.
What to Do Press the machine's  Black or Color  button.
Wait a while and retry copying.
864 

3403Cause
Machine could not make copies because its memory is full.
What to Do Press the machine's  Black or Color  button.
Wait a while and retry copying.
865 

3405Cause
Machine could not make copies because its memory is full.
What to Do Press the machine's  Black or Color  button.
Wait a while and retry copying.
866 

3412Cause
Scanning original has failed.
What to Do Press the machine's  Black or Color  button, and then follow the actions below.

4100Cause
Specified data cannot be printed.
What to DoIf you are printing CREATIVE PARK PREMIUM contents, check the message shown your computer,make sure genuine Canon FINE cartridges are installed properly for all colors, and retry the printing.
868 

4103Cause
Cannot perform printing with current print settings.
What to Do Press the machine's  Stop button to cancel printing.
Then change the print settings and retry printing.
869 

5011Cause
Printer error has occurred.
What to Do Turn off the machine and unplug it.
Plug in the machine again and turn it back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
870