Canon printer PIXMA iP2000 User Manual

							Basic Printing
7
„Loading the Envelopes
Envelopes can be fed from the Auto Sheet Feeder only. Use either DL or US Comm. #10 
size envelopes.
(4)Select E
Envelope in MMedia Type, and then select CComm. Env. #10 or DDL Env. in 
Page Size.
For the printer driver setting, refer to "P
Printing with Windows"on page 13, 
"P
Printing with Macintosh"on page 16. Important• Do not use the envelopes with embossed or treated surface, with a 
double flap or pressure seals, with sticker flaps.
• Select either D
DL Env. or CComm. Env. #10 According to the envelope 
size you are using.
NoteSet the Paper Thickness Lever to the right for envelopes.
Fold the envelope flap.
(1) Align the envelope against the 
right side of the Auto Sheet 
Feeder.
Set the envelope with its flap on 
the left side.
A maximum of 10 envelopes can 
be loaded at once.
(3) Ensure that the lamp of the Auto 
Sheet Feeder is lit. Printing direction (2) Pinch the Paper Guide 
and slide it against the 
left side of the envelope.
QSG_Basic.fm  Page 7  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
8
„Loading the 4" x 6" size papers
You can print on the 4" x 6" size papers.
(4)Select 4
4 x 6 in in PPage Size.
For the printer driver setting, refer to "P
Printing with Windows"on page 13, 
"P
Printing with Macintosh"on page 16.
(1) Align the paper stack against the 
right side of the Auto Sheet 
Feeder.
Despite the direction of the 
photograph, load the paper in the 
vertical direction.
You can load a maximum of 20 
papers in 4" x 6" size.
(3) Ensure that the lamp of the Auto 
Sheet Feeder is lit. (2) Pinch the Paper Guide 
and slide it against the left 
side of the stack of paper.
QSG_Basic.fm  Page 8  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
9
„Loading Paper in the Front Sheet Feeder
1Flatten the four corners of the paper before loading it.
2Prepare to load paper.
Note• For detailed information on the speciality media Canon provides for 
use with its various printers, refer to the section "U
Using Speciality 
Media"on page 11.
• See "P
Printing Media" in the User’s Guide for detailed instructions on 
how to load speciality media into the printer.
ImportantWhen paper is curled, hold the opposing curled corners and gently bend 
them in the opposite direction until the paper becomes completely flat.
NoteSet the Paper Thickness Lever to the left ( ) for plain paper.
Move to the right position ( ) only for T-Shirt Transfers.
See"CCanon Speciality Media"on page 12.
(1) Open the Front Sheet Feeder.
(2) Press the Paper Feed Switch. 
Ensure that the lamp of the 
Front Sheet Feeder is lit. Front Sheet Feeder Lamp
 (3)Open the Front Cover and adjust 
the Paper Thickness Lever.
QSG_Basic.fm  Page 9  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
10
3Load the paper.
4Pull out the Paper Output Tray.
Pull out completely as shown.Note• Do not stack more than 50 sheets in the Paper Output Tray.
• Do not touch the printed surface until the ink dries. For specific 
drying times, refer to the instructions packaged with your media.
Note• You can also select the paper source from the printer driver. For 
details, refer to "U
Using the Auto Sheet Feeder and the Front Sheet 
Feeder" in the 
User’s Guide.
• When you load the media in the Front Sheet Feeder, ensure that you 
are printing on the correct side of it as shown below.
•To Print with Duplex Printing
After printing one side, the printed paper can be fed from the Auto 
Sheet Feeder.
Load the paper in the Auto Sheet Feeder to print on the other side, 
according to the message shown on the screen.(2) Align the paper stack against the 
right side of the Front Sheet Feeder.
(3) Pinch the Paper Guide and slide it 
against the each side of the paper 
stack. (1) Insert the paper into the Front 
Sheet Feeder with the print side 
facing down. Load the paper so that 
the leading edge of paper is set 
firmly against the rear end.
QSG_Basic.fm  Page 10  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
11
Using Speciality Media
Canon recommends that you use genuine Canon media to ensure optimal print quality.
„Photo Quality Media
• Photo Paper Pro
• Photo Paper Plus Glossy
• Photo Paper Plus Double Sided
• Photo Paper Plus Semi-Gloss
• Matte Photo Paper
• Glossy Photo Paper
„Media Suited to Business 
Documents
• High Resolution Paper
• Transparencies
QSG_Basic.fm  Page 11  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
12
„Canon Speciality Media
* When paper cannot be fed normally, load the necessary number of sheets in the Auto Sheet Feeder or the Front Sheet Feeder 
with them separating from each other to avoid them from sticking together.
Media NamePaper Support Load LimitPaper 
Thickness 
Lever PositionPrinter Driver Settings
for Media Type
Auto Sheet 
FeederFront Sheet 
Feeder
Photo Paper Pro Letter: up to 
10 sheets*
4"×6": up to 
20 sheetsLetter: up to 
10 sheetsLeft Photo Paper Pro
Photo Paper Plus 
GlossyLetter: up to 
10sheets*
5"×7": up to 
10 sheets
4"×6": up to 
20 sheetsLetter: up to 
10 sheetsLeft Photo Paper Plus 
Glossy
Photo Paper Plus 
Double SidedLetter: 1 
sheet
5"×7": 1 
sheetLetter: up to 
10 sheetsLeft Photo Paper Plus 
Double Sided
Photo Paper Plus
Semi-GlossLetter: up to 
10 sheets*
4"×6": up to 
20 sheetsLetter: up to 
10 sheetsLeft Photo Paper Plus 
Glossy
Matte Photo Paper Letter: up to 
10 sheetsLetter: up to 
10 sheetsLeft Matte Photo Paper
Glossy Photo Paper Letter: up to 
10 sheets*
4"×6": up to 
20 sheetsLetter: up to 
10 sheetsLeft Glossy Photo Paper
High Resolution Paper Letter: up to 
80 sheetsLetter: up to 
80 sheetsLeft High Resolution Paper
T-Shirt Transfers 1 sheet 1 sheet Right T-Shirt Transfer
Transparencies Up to 30 
sheets*Up to 30 
sheetsLeft Transparency
QSG_Basic.fm  Page 12  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
13
l
Printing with Windows
1Create a document or open a file to print.
Note• When using plain paper (64 gsm or 17 lb), up to 150 sheets can be set. Set 
the Paper Thickness Lever to the left and select P
Plain Paper from the printer 
driver M
Media Type.
• For detailed description of print media types, refer to "P
Printing Media" in the 
User’s Guide.
For instructions on how to print from the software applications, refer to the 
Photo Application Guide.
Note• The menu screens and dialog boxes that appear may vary, depending on the 
software application you are using.
• The steps described in this section are for printing in Windows XP.
• Ensure that the proper paper source is selected.
(1) When the Auto Sheet Feeder Lamp is lit, paper 
will be fed from the Auto Sheet Feeder.
(2) When the Front Sheet Feeder Lamp is lit, paper 
will be fed from the Front Sheet Feeder.
QSG_Basic.fm  Page 13  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
14
2Open Printer Properties dialog box.
(1)Select PPrint from the application software's FFile menu.
3Specify the required settings.
NoteIn Windows 2000, click the MMain tab in the PPrint dialog box.
(2) Ensure that CCanon PIXMA 
iP2000 is selected.
(3)
Click PPreferences or 
Properties
.
(1)Click MMedia Type to select 
the media loaded in the 
printer.
(2)Click OOK. Ensure that P
Paper Feed Switch is 
selected from P
Paper Source.
QSG_Basic.fm  Page 14  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
15
4Print the document.
Note•From the PPage Setup tab select the correct document size to be 
printed.
• Usually, select P
Paper Feed Switch from PPaper Source. For detailed 
description of the P
Paper Source settings, refer to "UUsing the Auto 
Sheet Feeder and the Front Sheet Feeder" in the 
User’s Guide.
• To adjust Print Quality settings, select C
Custom and click SSet on the 
Main tab. You can control quality in the S
Set Print Quality dialog box.
• For details about other printer driver functions, refer to "P
Printer Driver 
Functions" in the 
User’s Guide or Help.
• Select P
Preview before printing by clicking the check box. This 
displays a preview screen that allows you to confirm the selected 
printing effects and how your document will look when printed. 
Some applications do not contain the function to display the preview.
Note• You can cancel a print job in progress by simply pressing the 
RESUME/CANCEL button on the printer.
See"CCanceling Printing"on page 19.
•Click CCencel Printing on BJ Status Monitor to stop printing. To show BJ 
Status Monitor, click C
Canon PIXMA iP2000 on the taskbar.
BJ Status Monitor opens automatically when a printer error occurs.
(1) Click PPrint.
QSG_Basic.fm  Page 15  Wednesday, May 19, 2004  5:30 PM 
						

							Basic Printing
16
Printing with Macintosh
1Create a document or open a file to print.
2Select Paper Size.
(1)Select the PPage Setup from the application software's FFile menu. 
Page Setup dialog box opens. Note• The menu screens and dialog boxes that appear may vary, depending on the 
software application you are using.
• The steps described in this section are for printing in Mac OS X v.10.3.
• Ensure that the proper paper source is selected.
(1) When the Auto Sheet Feeder Lamp is lit, paper 
will be fed from the Auto Sheet Feeder.
(2) When the Front Sheet Feeder Lamp is lit, paper 
will be fed from the Front Sheet Feeder.
(3)Select the desired paper 
size from the P
Paper Size
pop-up menu.
(2) Select iiP2000 from FFormat for.
(4) Click OOK.
QSG_Basic.fm  Page 16  Wednesday, May 19, 2004  5:30 PM