Canon printer MAXIFY MB5120 User Manual

IPsec *3IPsec settingActiveSecurity Protocol *3Security methodESP/ESP & AH/AHWired LAN DRXDiscontinuous reception (wired
LAN)Enable/DisableOther SettingsOther settings–Printer NamePrinter namePrinter name (Up to 15 alphanumeric charac-
ters)Direct Conn. DevNameDevice name for direct connec-
tion (Up to 32 characters)Device name for direct connectionWSD PrintingWSD printing settingEnable/DisableWSD TimeoutTimeout1/5/10/15/20 [min]LPD PrintingLPD printing settingEnable/DisableRAW PrintingRAW printing...

*2 Network status is only printed when IPv6 is enabled.
*3 Network status is only printed when IPv6 and IPsec settings are enabled.
362 

ChangingLANConnectionMethod/ChangingWirelessLAN
ConnectionMethod
Changing LAN Connection Method
Changing Wireless LAN Connection Method
ChangingLANConnectionMethod
Follow either procedure below to change LAN connection method (wired or wireless).

4.Tap Cablelesssetup .5.
Check message and tap  OK.
Follow instructions on your smartphone or tablet.
6.
If message saying setup is completed appears, tap  OK.

NetworkSettings(IJNetworkDeviceSetupUtility)(Windows)
IJNetworkDeviceSetupUtility
StartingUpIJNetworkDeviceSetupUtility
IJNetworkDeviceSetupUtilityScreen
PerformingNetworkSettings
CheckingNetworkStatus
IJNetworkDeviceSetupUtilityMenus
OtherNetworkInformation
365 

IJNetworkDeviceSetupUtilityIJ Network Device Setup Utility allows a network/printer administrator to manage printers on network. When
you perform printer setup, the utility is installed at the same time.
Use IJ Network Device Setup Utility for:

StartingUpIJNetworkDeviceSetupUtilityStart up IJ Network Device Setup Utility as shown below.

IJNetworkDeviceSetupUtilityScreen
Items on IJ Network Device Setup Utility Screen
Menus on IJ Network Device Setup Utility Screen
Items on IJ Network Device Setup Utility Screen Toolbar
ItemsonIJNetworkDeviceSetupUtilityScreen
The screen below appears when you start up IJ Network Device Setup Utility. Detected printers are listed on the screen and the items below are shown.
1.
ProductName
Displays the product name of detected printer. The icon below appears on the left if the printer cannot...

SetupCompletedAppears after performing network setup and clicking  Set to close the window.
NotConnected Indicates the printer is required to perform wireless LAN setup.
Performing/Changing Wireless LAN Settings
NotSet Indicates the printer cannot be used on network. Specify an IP address or enable IPv6.
IPAddressOverlap Indicates the IP address is duplicated to another printer.
Unknown Indicates the printer used in the past cannot be used currently.
Note

7.SettingMethod
Displays printer setting method.