Canon printer MAXIFY MB5020 User Manual

About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night. In addition, you can specify the time range to reduce the operating noise.
Important
•
Set the current date and time in advance.
Setting the Sender Information
•
Authentication by the administrator password may be required to change the setting.
About the Machine Administration
If you do not know the administrator password, ask the administrator of the machine you are using....

1.
Tap the numbers to specify the starting time.
You can specify the hour from 0 to 24.
2.
Tap to confirm the starting time.
After specifying the starting time, specify the ending time following the same procedure.
B.
Tap to confirm the time to start and to end.
You can reduce the operating noise during the specified time.
The confirmation screen is displayed, then the 
 icon appears as the  Quiet setting menu
icon.
Important
•
Operating speed may be reduced compared to when the quiet mode is not...

Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security...

Note•
Tapping Details displays the security setting.
The password required when connecting from the external device is also displayed.
•
You can specify the access point name (SSID) and the security setting optionally.
Setting of the Access Point Mode
7.
Tap  OK.
The access point mode is enabled and the machine can be used as an access point.
Printing/Scanning with the Access Point Mode
Print/Scan with the access point mode following the procedure below.
1.
Connect an external device such as a computer...

3.Tap LAN settings .4.
Tap Change LAN .
5.
Tap Wireless LAN active .
If you do not use the machine over wireless LAN, select  Wired LAN active or Disable LAN .
Setting of the Access Point Mode Specify the settings for the access point mode following the procedure below.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap LAN settings .
5.
Tap Other settings .
6.
Tap Access point mode settings .
The screen to...

13.Enter the password (8 to 10 characters).14.
Tap OK to finish entering the password.
15.
Tap  OK to finish specifying the password setting.
Note
•
If you change the access point mode setting of the machine, also change the access point setting of
the external device such as a computer or a smartphone.
276 

Registering the Favorite Settings (Custom profiles)You can register the favorite copying, scanning, or faxing settings and call them up from the HOME screen.
You can register up to 20 settings.
Registering the Setting
Calling Up the Registered Setting
Editing/Deleting the Registered setting
Registering the Setting
Tap  Save profile  on each standby screen or on the screen displayed after the settings are specified.
Copy standby screenScan standby screenFax transmission standby screen
When the...

1.Make sure that the machine is turned on.2.
Flick the HOME screen, then tap  Custom profiles .
Using the Operation Panel
3.
Tap Edit/delete .
You can change the order or name of the registered settings and delete the settings.
•
To change the order of the registered settings
1.
Tap  Rearrange .
2.
Tap the setting you want to move.
3.
Tap  or  to move the selected setting.
4.
Tap Apply .
5.
Tap Exit.
•
To change the name of the registered settings
1.
Tap  Rename .
2.
Tap the setting you want to rename....

Checking the Total Number of Uses of the MachineYou can check the total number of uses of the machine (e.g. the total number of printing, copying, sending/
receiving faxes, or scanning).1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Records of use .
Using the Operation Panel
The  Records of use  screen is displayed.
3.
Tap the item to check.
Total sheets used on the device Displays the total number of printing.
You can check the total number of black and white printing,...

Information about Network Connection
Useful Information about Network Connection
280