Canon printer MAXIFY MB5020 User Manual
Here you can view all the pages of manual Canon printer MAXIFY MB5020 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 281
Useful Information about Network Connection Default Values Set at Factory (Network) Connecting the Machine to the Computer Using a USB Cable When Detecting the Printers Have the Same Name during Setup Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN Printing Out Network Setting Information 281
Page 282
Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address (IPv4 )Auto setupIP address (IPv6 )Auto setupSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MB5000 seriesLPR protocol settingEnableWireless LAN DRX settingEnableWired LAN DRX settingEnable ("XX"...
Page 283
Connecting the Machine to the Computer Using a USB CableConnect the machine and the computer using a USB cable as the illustration below. The USB port is located on the rear of the machine.283
Page 284
When Detecting the Printers Have the Same Name during SetupWhen the printer is detected during setup, you may see multiple printers of the same name on the detection result screen. Select a printer with checking the MAC address or the serial number set to the printer against that on the detection result screen. Note • A serial number may not be displayed on the detection result screen. To check the MAC address of the printer, print out the network setting information using the operation panel of the...
Page 285
Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN To add the computer connecting the machine with LAN or to change the connection method between the machine and the computer from USB to LAN, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. Connecting to Other Computer with LANTo add the computer connecting the machine with LAN, perform setup with the Setup CD-ROM orperform it according to the instructions on our website....
Page 286
Printing Out Network Setting InformationYou can print out the current network settings of the machine using the operation panel of the machine. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the machine is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Flick the HOME screen, then tap Setup . Using the Operation Panel The menu screen is displayed. 4. Tap Device settings . 5. Tap LAN settings . 6. Tap Confirm LAN...
Page 287
AuthenticationMethod of the Authenticationnone/auto/open/shared/WPA-PSK/WPA2-PSKSignal StrengthSignal Strength0 to 100 [%]TCP/IP VersionTCP/IP VersionIPv4 & IPv6/IPv4IPv4 IP AddressSelected IP Address (IPv4)XXX.XXX.XXX.XXXIPv4 Default GatewayDefault Gateway (IPv4)XXX.XXX.XXX.XXXSubnet MaskSubnet MaskXXX.XXX.XXX.XXXIPv6 IP Address *2Selected IP Address (IPv6)XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2Default Gateway (IPv6)XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXXSubnet Prefix Length...
Page 288
WSDWSD settingEnable/DisableWSD TimeoutTimeout1/5/10/15/20 [min]LPR ProtocolLPR protocol settingEnable/DisableBonjourBonjour settingEnable/DisableBonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumeric characters)DNS ServerGetting DNS Server automaticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy Server settingEnable/DisableProxy PortSpecifying Proxy Port1 to 65535Proxy AddressProxy...
Page 289
About Network Communication Changing and Confirming Network Settings Screens for Network Connection of IJ Network Tool Other Screens of IJ Network Tool Appendix for Network Communication 289
Page 290
Changing and Confirming Network Settings IJ Network Tool Changing the Settings in the Wireless LAN Sheet Changing the WEP Detailed Settings Changing the WPA/WPA2 Detailed Settings Changing the Settings in the Wired LAN Sheet Changing the Settings in the Admin Password Sheet Monitoring Wireless Network Status Initializing the Network Settings of the Machine Viewing the Modified Settings 290