Canon printer MAXIFY MB5020 User Manual

Cleaning the Paper Feed RollerIf the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper1.
Make sure that the power is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The setup menu screen will appear.
3.
Tap   Maintenance .
The...

The machine starts cleaning. The cleaning will be complete when the paper is ejected.11.
When the completion message appears, tap OK.
If the problem is not resolved after cleaning the paper feed roller, contact the service center.
232 

Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly.
You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1.
Make sure that the power is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The setup menu screen will appear.
3.
Tap   Maintenance .
The...

9.
Load only this sheet of paper in the cassette with the ridges of the creases facing up and
the edge of the half with no crease facing to the far side.
10.
Extend the output tray extension, then open the paper output support.
11.
Tap  OK.
The paper cleans the inside of the machine as it feeds through the machine. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
12.
When the completion message appears, tap  OK.
Note
•
When performing Bottom...

235 

Cleaning the Pad in the CassetteIf the pad in a cassette is smeared with paper powder or dirt, two or more sheets of paper may be ejected.
Follow the procedure below to clean the pad in a cassette.
You need to prepare: cotton swab1.
Pull out the cassette from the machine, then remove all the paper.
2.
Clean the pad (A) sideways with a moistened cotton swab.
Important
•
After cleaning the smeared pad, dry it completely.
3.
Reload the paper, then insert the cassette into the machine.
Note
•
If a message is...

Changing the Machine Settings
Changing Machine Settings from Your Computer
Changing the Machine Settings Using the Operation Panel
Registering the Favorite Settings (Custom profiles)
Checking the Total Number of Uses of the Machine
237 

Changing Machine Settings from Your Computer
Changing the Print Options
Registering a Frequently Used Printing Profile
Managing the Printer Power
Reducing the Printer Noise
Changing the Printer Operation Mode
238 

Changing the Print OptionsYou can change the detailed printer driver settings for print data that is sent from an application software.
Specify this option if you encounter print failures such as part of an image data being cut off.
The procedure for changing the print options is as follows:1.
Open the printer driver setup window
2.
Click  Print Options...  on the Page Setup  tab
The Print Options  dialog box opens.
Note
•
When you use the XPS printer driver, the functions available to you are...

Registering a Frequently Used Printing ProfileYou can register the frequently used printing profile to  Commonly Used Settings on the Quick Setup  tab.
Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
Registering a Printing Profile1.
Open the printer driver setup window
2.
Set the necessary items
From  Commonly Used Settings  on the Quick Setup  tab, select the printing profile to be used and if
necessary, change the settings after...