Canon printer MAXIFY MB2320 User Manual

How to Restore the Machine's Network Settings to Factory Default
Important
•
Note that initialization erases all network settings on the machine, and printing, scanning, or faxing
operation from a computer over network may become impossible. To use the machine over network, perform setup with the Setup CD-ROM or perform it according to the instructions on our website.
Initialize the network setting using the operation panel of the machine.
Reset setting
941 

Problems with Printing
Printing Does Not Start
Paper Jams
Paper Does Not Feed Properly/"No Paper" Error Occurs
Cannot Print Properly with Automatic Duplex Printing
Copying/Printing Stops Before It Is Completed
942 

Printing Does Not Start
Check1 Make sure that the power plug is securely plugged in, then press the  ON button
to turn the machine on.
While the  POWER lamp is flashing, the machine is initializing. Wait until the  POWER lamp stops flashing and
remains lit.
Note
•
When printing large data such as a photo or graphics, it may take longer to start printing. While the
POWER  lamp is flashing, the computer is processing data and sending it to the machine. Wait until printing
starts.
Check2  Make sure that the...

Deleting the Undesired Print Job
Check6 Make sure that your machine's name is selected in the Print dialog box.
The machine will not print properly if you are using a printer driver for a different printer.
Make sure that "Canon XXX series Printer" (where "XXX" is your machine's name) is selected in the Print dialog
box.
Note
•
To make the machine the one selected by default, select  Set as Default Printer.
Check7
 Configure the printer port appropriately.
Make sure that the...

If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install them from our
website.•
Printing does not start even though the port named "CNBJNP_xxxxxxxxxx" is selected when the machine is used over LAN:
Launch IJ Network Tool, and select "CNBJNP_xxxxxxxxxx" as you confirmed in step 4, then associate
the port with the printer using  Associate Port in the Settings  menu.
If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install...

Paper Jams
When paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action
described in the message.
•
When a Support Code and a message are displayed on the computer screen:
•
When a Support Code and a message are displayed on the touch screen:
For details on how to remove the jammed paper, refer to Support Code List (When Paper Is Jammed) .
Note
•
You can confirm the actions against errors with Support Codes on your computer or on the touch
screen by searching a...

Paper Does Not Feed Properly/"No Paper" Error Occurs
Check1 Make sure that paper is loaded.
Loading Paper
Check2 Make sure of the following when you load paper.
•
When loading two or more sheets of paper, flip through the paper before loading. In addition, when you load
paper with some paper remaining in the cassette, flip through the remaining paper and the newly loaded
paper before loading.
•
When loading two or more sheets of paper, align the edges of the sheets before loading.
•
When loading...

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.
Check5  Confirm that the media type and the paper size settings correspond with the
loaded paper.
Check6  Clean the paper feed roller.
Cleaning the Paper Feed Roller
Note
•
Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Check7 If two or more sheets of paper feed from the cassette at once, clean the...

Cannot Print Properly with Automatic Duplex Printing
Check1 Is the setting for automatic duplex printing selected?
Make sure that the  Duplex Printing and Automatic  check boxes are selected on the  Page Setup sheet in the
printer driver setup window.
Duplex Printing
Check2  Make sure that the actual size of the paper is suitable for automatic duplex
printing.
The sizes of media suitable for automatic duplex printing are A4 and Letter.
Load paper of suitable size, then tap  OK on the touch screen....

Copying/Printing Stops Before It Is Completed
Check1 Is the paper loaded?
Make sure that paper is loaded.
If the machine has run out of paper, load paper.
Check2  Do the printing documents have lots of photographs or illustrations?
As printing large data such as photos or graphics takes time for the machine and the computer to process, the machine may appear to have stopped operating.
In addition, when printing data that uses a large amount of ink continuously on plain paper, the machine maypause...