Canon printer MAXIFY MB2320 User Manual

1.Make sure that the machine is turned on.2.
Flick the HOME screen, then tap  Custom profiles .
Using the Operation Panel
3.
Tap Edit/delete .
You can change the order or name of the registered settings and delete the settings.
•
To change the order of the registered settings
1.
Tap  Rearrange .
2.
Tap the setting you want to move.
3.
Tap  or  to move the selected setting.
4.
Tap Apply .
5.
Tap Exit.
•
To change the name of the registered settings
1.
Tap  Rename .
2.
Tap the setting you want to rename....

Checking the Total Number of Uses of the MachineYou can check the total number of uses of the machine (e.g. the total number of printing, copying, sending/
receiving faxes, or scanning).1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Records of use .
Using the Operation Panel
The  Records of use  screen is displayed.
3.
Tap the item to check.
Total sheets used on the device Displays the total number of printing.
You can check the total number of black and white printing,...

Information about Network Connection
Useful Information about Network Connection
283 

Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Machine to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
284 

Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address  (IPv4 )Auto setupIP address  (IPv6 )Auto setupSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MB2300 seriesLPR protocol settingEnableWireless LAN DRX settingEnableWired LAN DRX settingEnable
("XX"...

Connecting the Machine to the Computer Using a USB CableConnect the machine and the computer using a USB cable as the illustration below. The USB port is located
on the rear of the machine.286 

When Detecting the Printers Have the Same Name during SetupWhen the printer is detected during setup, you may see multiple printers of the same name on the detection
result screen.
Select a printer with checking the MAC address or the serial number set to the printer against that on the detection result screen.
Note
•
A serial number may not be displayed on the detection result screen.
To check the MAC address of the printer, print out the network setting information using the operation panel
of the...

Connecting to Other Computer with LAN/Changing the Connection
Method from USB to LAN
To add the computer connecting the machine with LAN or to change the connection method between the
machine and the computer from USB to LAN, perform setup with the Setup CD-ROM or perform it according
to the instructions on our website.
Connecting to Other Computer with LANTo add the computer connecting the machine with LAN, perform setup with the Setup CD-ROM orperform it according to the instructions on our website....

Printing Out Network Setting InformationYou can print out the current network settings of the machine using the operation panel of the machine.
Important
•
This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper.
3.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The menu screen is displayed.
4.
Tap   Device settings .
5.
Tap LAN settings .
6.
Tap Confirm LAN...

AuthenticationMethod of the Authenticationnone/auto/open/shared/WPA-PSK/WPA2-PSKSignal StrengthSignal Strength0 to 100 [%]TCP/IP VersionTCP/IP VersionIPv4 & IPv6/IPv4IPv4 IP AddressSelected IP Address (IPv4)XXX.XXX.XXX.XXXIPv4 Default GatewayDefault Gateway (IPv4)XXX.XXX.XXX.XXXSubnet MaskSubnet MaskXXX.XXX.XXX.XXXIPv6 IP Address *2Selected IP Address (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2Default Gateway (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length...